Hitachi Projector CP-WU9100 User Manual

							51
1.To start the MENU, press the MENU button. The MENU you last used (EASY 
or ADVANCED) will appear. EASY MENU has priority to appear just after 
powered on.
Using the menu function
2.(1)  Use the ▲/▼ cursor buttons to select an item to 
operate. To change it to the ADVANCED MENU, select 
the ADVANCED MENU.
(2)  Use the ◄/► cursor buttons to operate the item.
This projector has the following menus:  
PICTURE, IMAGE, INPUT, SETUP, SCREEN menu, OPTION, NETWORK, 
SECURITY and EASY MENU.  
EASY MENU consists of functions often used, and the other menus are classified 
into each purpose and brought together as the ADVANCED MENU.
Each menus is operated using the same methods. While the projector is 
displaying any menu, the MENU button on the projector works as the cursor 
buttons. The basic operations of these menus are as follows.
In the EASY MENU
(1)  Use the ▲/▼ cursor buttons to select a menu. 
To change it to the EASY MENU, select the EASY 
MENU. 
The items in the menu appear on the right side.
(2)  Press the ► cursor button or ENTER button to  
move the cursor to the right side. Then use the  
▲/▼ cursor buttons to select an item to operate and press the ► cursor 
button or ENTER button to progress. The operation menu or dialog of the 
selected item will appear.
(3)  Use the buttons as instructed in the OSD to operate the item.
In the ADVANCED MENU
MENU  button 
RESET button
ENTER buttonCursor buttons
INPUT button
Operating
(continued on next page)      
						

							52
3.To close the MENU, press the MENU button again or select EXIT and press 
the ◄ cursor button or ENTER button. Even if you do not do anything, the 
dialog will automatically disappear after about 30 seconds.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
IndicationMeaning
EXITCloses the OSD menu. It is the same as pressing the MENU 
button.
RETURNReturns the menu to the previous menu.
CANCEL or NOCancels the operation in the present menu and returns to the 
previous menu.
OK or YESExecutes the prepared function or shifts the menu to the next 
menu.
• The functions on the OSD menu that cannot be used are displayed in 
gray and cannot be selected
NOTE
Operating 
						

							53
Menu items 
The items contained in the menus are as below:
MenuItems
EASY MENU (54)
ASPECT, KEYSTONE, PERFECT FIT, PICTURE MODE,  
ECO MODE, INSTALLATION, RESET, FILTER TIME, 
LANGUAGE, ADVANCED MENU, EXIT
PICTURE (56)
BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS, 
PICTURE QUALITY,  COLOR WHEEL, ACTIVE IRIS, MY 
MEMORY
IMAGE (61)ASPECT, OVER SCAN, V POSITION, H POSITION, H PHASE,  
H SIZE, AUTO ADJUST EXECUTE
INPUT (64)
PROGRESSIVE, VIDEO NR, COLOR SPACE, VIDEO FORMAT, 
DIGITAL FORMAT, DIGITAL RANGE, COMPUTER IN, FRAME 
LOCK, RESOLUTION, PbyP/PinP SETUP
SETUP (70)GEOMETORY CORRECTION, LAMP & FILTER, PICTURE 
POSITION, INSTALLATION, STANDBY MODE, OSD MESSAGE
SCREEN (76)
LANGUAGE, MENU POSITION, BLANK, AUTO BLANK, START 
UP, MyScreen, MyScreen Lock, SOURCE NAME, TEMPLATE, 
C.C.
OPTION (82)
SOURCE SKIP, AUTO SEARCH, DIRECT POWER ON, AUTO 
POWER OFF, SHUTTER TIMER, MY BUTTON, SCHEDULE, 
SERVICE
NETWORK (95)
PROJECTOR NAME, WIRELESS SETUP, WIRED SETUP, 
NETWORK INFORMATION, SNTP SETUP, MY IMAGE,  
EXTERNAL CONTROL, PRESENTATION, WIRED NETWORK
SECURITY (96)
SECURITY PASSWORD CHANGE, MyScreen PASSWORD,  
PIN LOCK, MY TEXT PASSWORD, MY TEXT DISPLAY, MY 
TEXT WRITING, SECURITY INDICATOR, STACK LOCK
Operating 
						

							54
EASY MENU
EASY MENU
Select an item from the EASY menu using the ▲/▼ 
cursor buttons. Then perform it according to the 
following table.
ItemDescription
ASPECTUsing the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu (61).
KEYSTONEUsing the ► cursor button to start the settings.
For details, see KEYSTONE in Correcting the distortion(38).
PERFECT FITPressing the ► button displays the PERFECT FIT dialog.  
For details, see PERFECT FIT in Correcting the distortion(38).
PICTURE MODE
Using the ◄/► buttons switches the picture mode.The picture modes are combinations of GAMMA, COLOR TEMP and ACCENTUALIZER settings. Choose a suitable mode according to the projected source.
For more details of USER-1, -2 and -3, refer to PICTURE 
QUALITY (57).
STANDARD NATURAL CINEMA 
BOARD(BLACK)

BOARD(GREEN)
WHITEBOARDDAYTIMEDICOM SIM.


DYNAMIC  
USER-1
USER-2
USER-3


(continued on next page) 
						

							55
EASY MENU
ItemDescription
PICTURE MODE (continued)
• Lines or other noise might appear on the screen when this function is operated, but it is not a malfunction.• DICOM SIM. is the projector's DICOM® ("Digital Imaging and Communication in Medicine") simulation mode. This mode simulates the DICOM standard, which is a standard applicable to digital communications in medicine, and can be useful for displaying medical images, such as X-rays photos. This projector is not a medical device and is not compliant to the DICOM standard, and neither the projector nor the DICOM SIM. mode should be used for medical diagnosis.
ECO MODE
Using the ◄/► buttons turns off/on the Eco mode.See the ECO MODE item in SETUP, then LAMP & FILTER menu 
(71).
INSTALLATIONPressing the ► button displays the INSTALLATION dialog.
See the INSTALLATION item in SETUP menu (74).
RESET
Selecting this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE.A dialog is displayed for confirmation. Selecting the OK using the ► button performs resetting.
FILTER TIME
The usage time of the air filter is shown in the menu.Selecting this item resets the filter time which counts usage time of the air filter.A dialog is displayed for confirmation. Selecting OK using the ► button initiates the reset. See the FILTER TIME item in SETUP, then LAMP & FILTER menu 
(73).
LANGUAGEUsing the ◄/► buttons changes the display language. 
See the LANGUAGE item in SCREEN menu (76).
ADVANCED MENUPress the ► or ENTER button to use the menu of PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION, NETWORK or SECURITY.
EXITPress the ◄ or ENTER button to close the OSD menu. 
						

							56
PICTURE menu
PICTURE menu
Select an item from the PICTURE menu using the 
▲/▼ cursor buttons, and press the ► cursor button 
or ENTER button to execute the item. Then perform 
it according to the following table. 
ItemDescription
BRIGHTNESSUsing the ◄/► buttons adjusts the brightness.
Dark  Light
CONTRASTUsing the ◄/► buttons adjusts the contrast.
Weak  Strong
COLORUsing the ◄/► buttons adjusts the strength of whole color.
Weak  Strong
TINTUsing the ◄/► buttons adjusts the tint.
Reddish  Greenish
SHARPNESS
Using the ◄/► buttons adjusts the sharpness.
Weak  Strong
• There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction.
(continued on next page) 
						

							57
                                                                                                           PICTURE menu
ItemDescription
PICTURE QUALITY
Selecting this item displays the PICTURE 
QUALITY menu.
Select an item using the ▲/▼ buttons, and press the ► button or the ENTER
button on the remote control to execute the item.
PICTURE MODE
After selecting USER-1 / USER-2 / USER-3, the following features are adjustable. 
Gamma, Color Temp 
GAMMA
This feature is only available when USER-1 / USER-2 / USER-3 is selected.
Using the ▲/▼ buttons switches the gamma mode.
DEFAULT-1CUSTOM-1


DEFAULT-2CUSTOM-2
DEFAULT-3
CUSTOM-3


DEFAULT-4
CUSTOM-4
DEFAULT-5CUSTOM-5DEFAULT-6CUSTOM-6


DEFAULT-8
CUSTOM-8

DEFAULT-7
CUSTOM-7
(continued on next page)
STANDARD NATURAL CINEMA 
BOARD(BLACK)

BOARD(GREEN)
WHITEBOARDDAYTIMEDICOM SIM.


DYNAMIC  
USER-1
USER-2
USER-3

 
						

							58
PICTURE menu
ItemDescription
PICTURE QUALITY (continued)
GAMMA (continued)
Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays  a dialog to help you in adjusting the mode. This function is useful when you want to change the brightness of particular tones.Choose an item using the ◄/► buttons, and  adjust the level using the ▲/▼ buttons.• Lines or other noise might appear on the screen when this function is operated, but it is not a malfunction.
COLOR TEMP
This feature is only available when USER-1 / USER-2 / USER-3 is selected.
Using the ▲/▼ buttons switches the color temperature mode.
   HIGH          CUSTOM-1          MID-1         CUSTOM-2                                                                                        
CUSTOM-7                                                                     MID-2                                                                                        
Hi-BRIGHT-3                                                           CUSTOM-3
                                                                                        
CUSTOM-6                                                                      LOW
                                                                                        
Hi-BRIGHT-2  CUSTOM-5  Hi-BRIGHT-1  CUSTOM-4
Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode.OFFSET adjustments change the color intensity on the whole tones of the test pattern. GAIN adjustments mainly affect color intensity on the brighter tones of the test pattern.Choose an item using the ◄/► buttons, and adjust the level using the ▲/▼ buttons.• Lines or other noise might appear on the screen when this function is operated, but it is not a malfunction.
(continued on next page) 
						

							59
                                                                                                           PICTURE menu
ItemDescription
PICTURE QUALITY (continued)
ACCENTUALIZER
ACCENTUALIZER is a function to improve the legibility.Using the ◄/► buttons adjusts the sharpness.
Weak  Strong
• There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction
HDCR
A function to show a clear picture in a bright room. Using the◄/► buttons adjusts the contrast.
COLOR MANAGEMENT
A function to adjust color phase, color saturation, and brightness respectively for red, yellow, green, cyan, blue, and magenta.
(continued on next page) 
						

							60
PICTURE menu
ItemDescription
COLOR WHEEL
Using the ▲/▼ buttons switches the Color Wheel.
BRIGHTRICH COLOR
BRIGHT  : Enhances the amount of light given out.RICH COLOR : Enhances the color.
ACTIVE IRIS
Using the ▲/▼ cursor buttons changes the active iris control mode.
PRESENTATION    THEATER    OFF              
PRESENTATION :  The active iris displays the best presentation image for both bright and dark scenes.THEATER :  The active iris displays the best theater image for both bright and dark scenes.OFF :  The active iris is always open.
• The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs, select OFF.
MY MEMORY
This projector has four memories for adjustment data (for all the items of the PICTURE menu).Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER button performs each function.LOAD-1 LOAD-2  LOAD-3  LOAD-4
SAVE-4  SAVE-3  SAVE-2  SAVE-1
LOAD-1, LOAD-2, LOAD-3, LOAD-4Performing a LOAD function loads the data from the memory linked in the number included in the function’s name, and adjusts the picture automatically depending on the data. • The LOAD functions whose linked memory has no data are skipped.• Remember that the current adjusted condition will be lost by loading data. To keep the current adjustment, save it before performing a LOAD function.• There may be some noise and the screen may flicker for a moment when loading data. This is not malfunction.• You can perform the LOAD function using MY BUTTON. See MY 
BUTTON item in OPTION menu (84).
SAVE-1, SAVE-2, SAVE-3, SAVE-4Performing a SAVE function saves the current adjustment data into the memory linked in the number included in the function’s name. • Remember that the current data being stored of a memory will be lost by saving new data into the memory.