Hitachi Projector CP-WU5505 User Manual

							51
Operating
1.To start the MENU, press the MENU button. The MENU you last used (EASY 
or ADVANCED) will appear. EASY MENU has priority to appear just after 
powered on.
Using the menu function
2.(1)  Use the ▲/▼ cursor buttons to select an item to 
operate. If you want to change it to the ADVANCED 
MENU, select the ADVANCED MENU.
(2)   Use the ◄/► cursor buttons to operate the item.
This projector has the following menus: 
 
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK, 
SECURITY and EASY MENU. EASY MENU consists of functions often used, and 
the other menus are classified into each purpose and brought together as the 
ADVANCED MENU.
Each of these menus is operated using the same methods.  While the projector 
is displaying any menu, the  MENU button on the projector works as the cursor 
buttons.  The basic operations of these menus are as follows.
In the EASY MENU
(continued on next page) (1)  
Use the ▲/▼ cursor buttons to select a menu. 
If you want to change it to the EASY MENU, select 
the EASY MENU. 
The items in the menu appear on the right side.
(2)   Press the ► cursor button or ENTER button to  
move the cursor to the right side. Then use the  
▲/▼ cursor buttons to select an item to operate and press the ► cursor 
button or ENTER button to progress. The operation menu or dialog of the 
selected item will appear.
(3)   Use the buttons as instructed in the OSD to operate the item.
In the ADVANCED MENU
ENTER  button
ASPECT
BLANK
ESC MENU
RESET
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP
ENTER
FOCUS
- +
ZOOM
- +
INPUT
INTERACTIVE
MYBUTTON12
PbyP
MAGNIFYVOLUME
-
+
GEOMETRY PICTURE MUTE
NETWORK
OSD MSG
ASPECT
BLANKESC MENU
RESET
AUTOPAGEDOWN
ONOFFFREEZE
UP
ENTER
FOCUS- +ZOOM- +
INPUT
INTERACTIVE
MYBUTTON1
2PbyPMAGNIFYVOLUME-
+GEOMETRY PICTURE MUTE
NETWORK
OSD MSG
INPUT  buttonMENU button
RESET  button
Cursor buttons 
						

							52
Operating
Using the menu function (continued)
3.To close the MENU, press the MENU button again or select EXIT and press 
the ◄ cursor button or ENTER button. Even if you do not do anything, the 
dialog will automatically disappear after about 30 seconds.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
IndicationMeaning
EXITSelecting this word finishes the OSD menu. It's the same as 
pressing the 
MENU button.
RETURN Selecting this word returns the menu to the previous menu.
CANCEL or NO Selecting this word cancels the operation in the present 
menu and returns to the previous menu.
OK or YES Selecting this word executes the prepared function or shifts 
the menu to the next menu.
• Some functions cannot be performed when a certain input port is 
selected, or when a certain input signal is displayed.
• When you want to reset the operation, press  RESET button on the remote 
control during the operation. Note that some items (ex. LANGUAGE, VOLUME) 
cannot be reset.
• In the ADVANCED MENU, when you want to return to the previous display, 
press the ◄ cursor button on the remote control. NOTE 
						

							53
Operating
Using the menu function (continued)
Containing items of  each menu
The items contained in the menus are as below;
MenuItems
EASY MENU  (
54
) ASPECT, KEYSTONE, PERFECT FIT, PICTURE MODE,
 
ECO MODE, INSTALLATION, RESET, FILTER TIME,  
LANGUAGE, ADVANCED MENU, EXIT
PICTURE (
56
) BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS, 
ACTIVE IRIS, PICTURE QUALITY, MY MEMORY
IMAGE  (
60
) ASPECT, OVER SCAN, V POSITION, H POSITION, H PHASE,
 
H SIZE, AUTO ADJUST EXECUTE
INPUT  (
63
) PROGRESSIVE, VIDEO NR, COLOR SPACE,  
VIDEO FORMAT, DIGITAL FORMAT, DIGITAL RANGE, 
COMPUTER IN, FRAME LOCK, RESOLUTION,
 
PbyP/PinP SETUP, MHL STANDBY PWR.
SETUP  (
68
)
GEOMETRY CORRECTION, LAMP & FILTER, IMAGE OPTIMIZER,  
PICTURE POSITION, INSTALLATION, STANDBY MODE, 
COLOR UNIFORMITY, OSD MESSAGE, HDMI OUTPUT, 
STANDBY OUTPUT
AUDIO  (
75
) VOLUME, SPEAKER, AUDIO SOURCE
SCREEN (
76
) LANGUAGE, MENU POSITION, BLANK, AUTO BLANK, 
START UP, MyScreen, MyScreen Lock, SOURCE NAME, 
TEMPLATE, C.C.
OPTION  (
82
) SOURCE SKIP, AUTO SEARCH, DIRECT POWER ON,
 
AUTO POWER OFF, SHADE TIMER, MY BUTTON, 
SCHEDULE, SERVICE
NETWORK  (
95
) NETWORK INFORMATION, WIRELESS NETWORK, 
 
NETWORK SETUP, MY IMAGE, EXTERNAL CONTROL,  
OTHER OPERATION
SECURITY  (
96
) ENTER PASSWORD, SECURITY PASSWORD CHANGE, 
MyScreen PASSWORD, PIN LOCK, TRANSITION DETECTOR, 
MY TEXT PASSWORD, MY TEXT DISPLAY, MY TEXT WRITING, 
 
SECURITY INDICATOR, STACK LOCK 
						

							54
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then 
perform it according to the following table.
ItemDescription
ASPECT Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu (

60
).
KEYSTONE  Pressing the ► button displays the KEYSTONE dialog.  
See the KEYSTONE item in SETUP menu (
68
).
PERFECT FITPressing the ► button displays the PERFECT FIT dialog.  
See the PERFECT FIT item in SETUP menu ( 68
).
PICTURE MODE Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR TEMP 
settings. Choose a suitable mode according to the projected source.
STANDARD   ó  NATURAL  
ó  CINEMA  
ó  DYNAMIC
                                                                                  

USER-3                                                            BOARD(BLACK)
        
                                                                          

USER-2                                                            BOARD(GREEN)
        
                                                                          

USER-1    ó  DICOM SIM. 
ó DAYTIME 
ó WHITEBOARD
• Lines or other noise might appear on the screen when this function 
is operated, but it is not a malfunction.
• DICOM SIM. is the projector's DICOM
® ("Digital Imaging and 
Communication in Medicine") simulation mode. This mode 
simulates the DICOM standard, which is a standard applicable to 
digital communications in medicine, and can be useful for displaying 
medical images, such as X-rays photos. This projector is not a 
medical device and is not compliant to the DICOM standard, and 
neither the projector nor the DICOM SIM. mode should be used for 
medical diagnosis.
(continued on next page) 
						

							55
EASY MENU
ItemDescription
ECO MODE Using the ◄/► buttons turns off/on the Eco mode.
See the ECO MODE item in SETUP menu (

69
).
INSTALLATION Pressing the ► button displays the INSTALLATION dialog.
See the INSTALLATION item in SETUP menu (

71
).
RESET Performing this item resets all of the EASY MENU items except the 
FILTER TIME and LANGUAGE.
A dialog is displayed for confirmation. Selecting the OK using the ► 
button performs resetting.
FILTER TIME The usage time of the air filter is shown in the menu.
Performing this item resets the filter time which counts usage time 
of the air filter.
A dialog is displayed for confirmation. Selecting the OK using the ► 
button performs resetting. 
See the FILTER TIME item in SETUP menu (

70
).
LANGUAGE Using the ◄/► buttons changes the display language. 
See the LANGUAGE item in SCREEN menu
 (
76
).
ADVANCED MENUPress the ► or  ENTER button to use the menu of PICTURE, 
IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK or 
SECURITY.
EXIT Press the ◄ or  ENTER button to finish the OSD menu. 
						

							56
PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
BRIGHTNESS Using the 
◄/► buttons adjusts the brightness.
Dark  ó Light
CONTRAST Using the 
◄/► buttons adjusts the contrast.
Weak  ó Strong
COLOR Using the ◄/► buttons adjusts the strength of whole color.
Weak  ó Strong
• This item can be selected only for a video and component video 
signal.
• For HDMI
TM, MHL, and HDBaseTTM signals, this item can also be 
selected if either (1) or (2) applies.
(1)   DIGITAL FORMAT item in the INPUT menu for selected port is 
set to VIDEO.
(2)   DIGITAL FORMAT item in the INPUT menu for selected port is 
set to AUTO, and the projector recognizes that it receives video 
signals.
TINT Using the ◄/► buttons adjusts the tint.
Reddish  ó Greenish
• This item can be selected only for a video and component video 
signal.
• For HDMI
TM, MHL, and HDBaseTTM signals, this item can also be 
selected if either (1) or (2) applies.
(1)   DIGITAL FORMAT item in the INPUT menu for selected port is 
set to VIDEO.
(2)   DIGITAL FORMAT item in the INPUT menu for selected port is 
set to AUTO, and the projector recognizes that it receives video 
signals.
SHARPNESS Using the ◄/► buttons adjusts the sharpness.
Weak  ó Strong
•  There may be some noise and/or the screen may flicker for a 
moment when an adjustment is made. This is not a malfunction.
(continued on next page) 
						

							57
PICTURE menu
ItemDescription
ACTIVE IRIS
Using the ▲/▼ cursor buttons changes the active iris control mode.
PRESENTATION   ó  THEATER  
ó  OFF              
PRESENTATION : 
 
The active iris displays the best presentation 
image for both bright and dark scenes.
THEATER :   
The active iris displays the best theater image for 
both bright and dark scenes.
OFF  :  
The active iris is always open.
• The screen may flicker when the PRESENTATION or THEATER 
modes are selected. If this occurs select OFF.
PICTURE  QUALITY Selecting this item displays the PICTURE 
QUALITY menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the 
ENTER
button on the remote control to execute 
the item.
PICTURE MODE STANDARD   ó  NATURAL  
ó  CINEMA  
ó  DYNAMIC
                                                                              

  USER-3                                                         BOARD(BLACK)
        
                                                                      

  USER-2                                                         BOARD(GREEN)
        
                                                                      

     USER-1    ó  DICOM SIM. 
ó DAYTIME 
ó WHITEBOARD
After selecting USER-1 / USER-2 / USER-3, the following features 
are adjustable. 
Gamma, Color Temp
GAMMA
This feature is only available when USER-1 / USER-2 / USER-3 is 
selected.
Using the ▲/▼ buttons switches the gamma mode. DEFAULT-1  ó CUSTOM-1 
ó DEFAULT-2 
ó CUSTOM-2
                                                                                

CUSTOM-8                                                           DEFAULT-3
        
                                                                        

DEFAULT-8                                                          CUSTOM-3
        
                                                                        

CUSTOM-7                                                           DEFAULT-4
        
                                                                        

DEFAULT-7                                                          CUSTOM-4
        
                                                                        

CUSTOM-6  ó DEFAULT-6 
ó CUSTOM-5 
ó DEFAULT-5
(continued on next page) 
						

							58
PICTURE menu
ItemDescription
PICTURE  QUALITY
(continued) GAMMA (continued)
Selecting a mode whose name includes CUSTOM and then 
pressing the ► button or the 
ENTER button displays   
a dialog to aid you in adjusting the mode. This function is useful 
when you want to change the brightness of particular tones.
Choose an item using the ◄/► buttons, and adjust the level using 
the ▲/▼ buttons.
• Lines or other noise might appear on the screen when this function 
is operated, but it is not a malfunction.
COLOR TEMP
This feature is only available when USER-1 / USER-2 / USER-3 is 
selected.
Using the ▲/▼ buttons switches the color temperature mode.
   HIGH      
ó      
CUSTOM-1     
ó     
MID-1     
ó    
CUSTOM-2
                                                                                         

CUSTOM-7                                                                      MID-2
       
                                                                                  

Hi-BRIGHT-3                                                            CUSTOM-3
       
                                                                                  

CUSTOM-6                                                                       LOW
       
                                                                                  

Hi-BRIGHT-2  ó CUSTOM-5 
ó Hi-BRIGHT-1 
ó CUSTOM-4
Selecting a mode whose name includes CUSTOM and then pressing 
the ► button or the 
ENTER button displays a dialog to aid you in 
adjusting the OFFSET and GAIN of the selected mode.
OFFSET adjustments change the color intensity on the whole tones. 
GAIN adjustments mainly affect color intensity on the brighter tones.
Choose an item using the ◄/► buttons, and adjust the level using 
the ▲/▼ buttons.
• Lines or other noise might appear on the screen when this function 
is operated, but it is not a malfunction.
(continued on next page) 
						

							59
PICTURE menu
ItemDescription
PICTURE  QUALITY
(continued) ACCENTUALIZER
ACCENTUALIZER is a function to improve the legibility.
Using the ◄/► buttons adjusts the sharpness.
Weak  ó Strong
•  There may be some noise and/or the screen may flicker for a 
moment when an adjustment is made. This is not a malfunction.
• 
This function may not work properly when IMAGE OPTIMIZER is 
enabled.
HDCR
A function to show a clear picture in a bright room.  
Using the ◄/► buttons adjusts the contrast.
• 
This function may not work properly when IMAGE OPTIMIZER is 
enabled.
MY MEMORY
This projector has 4 memories for adjustment data (for all the items 
of the PICTURE menu).
Selecting a function using the ▲/▼ buttons and pressing the ► or 
ENTER  button performs each function.
LOAD-1  ó LOAD-2 
ó LOAD-3 
ó LOAD-4
SAVE-4  ó SAVE-3 
ó SAVE-2 
ó SAVE-1
LOAD-1, LOAD-2, LOAD-3, LOAD-4
Performing a LOAD function loads the data from the memory linked 
in the number included in the function’s name, and adjusts the 
picture automatically depending on the data. 
• The LOAD functions whose linked memory has no data are 
skipped.
• Remember that the current adjusted condition will be lost by 
loading data. If you want to keep the current adjustment, please 
save it before performing a LOAD function.
• There may be some noise and the screen may flicker for a 
moment when loading data. This is not malfunction.
• You can perform the LOAD function using  MY BUTTON. Please 
see MY BUTTON item in OPTION menu (
 84
).
SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into 
the memory linked in the number included in the function’s name. 
• Remember that the current data being stored of a memory will be 
lost by saving new data into the memory. 
						

							60
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table for selected port.
ItemDescription
ASPECT Using the ▲/▼ buttons switches the mode for aspect ratio.
 
For a computer signal CP-X5550, CP-X5555:   
  NORMAL 
ó 4:3 
ó 16:9 
ó 16:10 
ó ZOOM 
 
        
CP-WU5500, CP-WX5500, CP-WU5505, CP-WX5505:  
  NORMAL 
ó 4:3 
ó 16:9 
ó 16:10 
ó ZOOM 
ó NATIVE 
        
For HDMITM, HDBaseT™, and MHL signals
CP-X5550, CP-X5555:   
  NORMAL 
ó 4:3 
ó 16:9 
ó 16:10 
ó 14:9 
ó ZOOM
 
        
CP-WU5500, CP-WX5500, CP-WU5505, CP-WX5505:  
  NORMAL 
ó 
4:3 
ó 
16:9 
ó 
16:10 
ó 
14:9 
ó ZOOM 
ó 
NATIVE  
        
For a video signal
CP-X5550, CP-X5555:   
  4:3 
ó 16:9 
ó 14:9 
ó ZOOM
 
  
CP-WU5500, CP-WX5500, CP-WU5505, CP-WX5505: 
  4:3 
ó 16:9 
ó 16:10 
ó 14:9 
ó ZOOM 
ó NATIVE 
   
For an input signal from the LAN port, or if there is no signal
CP-X5550, CP-X5555:
 4:3 (fixed) 
CP-WU5500, CP-WX5500, CP-WU5505, CP-WX5505: 16:10 (fixed)
• The NORMAL mode keeps the orig inal aspect ratio of the signal.
(continued on next page)