Hitachi Projector CP-HD9950 User Manual

61
IMAGE menu
IMAGE menu
Select an item from the IMAGE menu using the ▲/▼ 
cursor buttons, and press the ► cursor button or 
ENTER button to execute the item. Then perform it 
according to the following table.
ItemDescription
ASPECT
Using the ▲/▼ buttons switches the mode for aspect ratio. 
For a computer signal
 NORMAL  4:3  16:9  16:10  ZOOM  NATIVE        
For an HDMITM, DVI-D and HDBaseT™ signal
 NORMAL  4:3  16:9  16:10  14:9  ZOOM  NATIVE        
For a video signal or component video...

62
IMAGE menu
ItemDescription
OVER SCAN
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture)  Large (It reduces picture)
• This item can be selected only for a video and component video signal.• For an HDMITM, HDBaseT™, DVI-D and SDI/DIGITAL 1 signal, this item can also be selected if either (1) or (2) applies.(1)  DIGITAL FORMAT item in the INPUT menu for selected port is set to VIDEO.(2)  DIGITAL FORMAT item in the INPUT menu for selected port is set to AUTO, and the...

63
IMAGE menu
ItemDescription
H PHASE
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.
Right  Left
• This item can be selected only for a computer signal or a component video signal. This function is unavailable for a signal from the LAN, HDMI 1 / 2, HDBaseT™, DVI-D or SDI/DIGITAL 1 port.
H SIZE
Using the ◄/► buttons adjusts the horizontal size.
Small  Large
• This item can be selected only for a computer signal. This function is unavailable for a signal from the LAN, HDMI 1 /...

64
INPUT menu
INPUT menu
Select an item from the Input menu using the ▲/▼ 
cursor buttons, and press the ► cursor button or 
ENTER button to execute the item. Then perform it 
according to the following table.
ItemDescription
PROGRESSIVE
Using the ▲/▼ buttons switches the progress mode.
TV  FILM  OFF  
• This function works only for a video signal, component video signal (of 480i@60 or 576i@50 or 1080i@50/60), an HDMITM signal (of 480i@60 or 576i@50 or 1080i@50/60), HDBaseT™ signal (of 480i@60 or...

65
INPUT menu
ItemDescription
VIDEO FORMAT
The video format for VIDEO port can be set.
 
Using the ◄/► buttons switches the mode for video format.
AUTO    NTSC    PAL    SECAM
       N-PAL  M-PAL  NTSC4.43 
• This item is used only for a video signal from the VIDEO port.• The AUTO mode automatically selects the optimum mode.• The AUTO operation may not work well for some signals. If the picture becomes unstable (for example, an irregular picture, lack of color), select the mode according to the...

66
INPUT menu
ItemDescription
DIGITAL RANGE
The video format of digital input signals from the HDMI 1/2, DVI-D, HDBaseT™ and SDI/DIGITAL 1 ports can be set.
(1)  Use the ▲/▼ buttons to select the port to be set.
(2)  Use the ◄/►buttons to select the digital range.
AUTO  NORMAL  ENHANCED
AUTO:  automatically sets the optimum mode.
NORMAL:  sets the suitable mode for DVD signals. (16-235)
ENHANCED:  sets the suitable mode for computer signals. (0-255)  ((1-254) for SDI)
• If the contrast of the screen...

67
INPUT menu
ItemDescription
FRAME LOCK
When ON is selected, moving pictures are displayed more smoothlySet the frame lock function on/off for each port.
(1)  Use the ▲/▼ buttons to select the input ports.
(2)  Use the ◄/► buttons to turn the frame lock function on/off .
ON  OFF
• This item can be performed only on a signal with a vertical frequency of 49 to 51Hz, 59 to 61 Hz.
(continued on next page) 

68
INPUT menu
ItemDescription
RESOLUTION
The resolution for the COMPUTER IN  input signals can be set on this projector.
(1)  In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be  displayed.
(2)  In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ buttons.  Selecting AUTO will set a resolution appropriate to the input signal.
(3)  Pressing the ► or ENTER button when selecting a STANDARD resolution will automatically...

69
ItemDescription
PbyP / PinP SETUP
PinP Position
Using ▲/▼ buttons on the remote control changes the position of 
sub area in PinP mode (50).
PbyP / PinP FRAME LOCK
Select the screen that enables FRAME LOCK function when using PbyP or PinP.LEFT / PRIMARY: Enables FRAME LOCK function for input on left screen of PbyP or on primary area of PinP.RIGHT / SECONDARY: Enables FRAME LOCK function for input on right screen of PbyP or on secondary area of PinP.
INPUT menu 

70
SETUP menu
Select an item from the Setup menu using the ▲/▼ 
cursor buttons, and press the ► cursor button or 
ENTER button to execute the item. Then perform it 
according to the following table.
SETUP menu
ItemDescription
GEOMETRY CORRECTION
KEYSTONE
Selecting this item displays the KEYSTONE dialog.
For details, see KEYSTONE in Correcting the distortion(38).
• When the zoom adjustment is set to the TELE (telephoto focus), this function may be excessive. This function should be used when the zoom...