Hitachi Pj-Lc9 Projector Users Manual

39
ENGLISH

Multifunctional settings
With the INPUT menu, the items shown in the table below 
can be performed.
Choose an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
referring to the following table.
INPUT menu
ItemDescription
COLOR SPACE
Using the buttons ▲/▼ switches the mode for color space.
AUTO 
 RGB  SMPTE240  REC709 ...

40

ItemDescription
ZOOMUsing the buttons ▲/▼ adjusts the zoom (magnifying power).
Large  Small
KEYSTONE
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data  Lower in the data
• The adjustable range for correction will vary among inputs. For some signals, this function may not work well.
• When the V:INVERT or H&V:INVERT is selected under the MIRROR item in the SETUP menu, if the projector screen is inclined 
or angled downward, this function may not work correctly.
• While...

41
ENGLISH

Multifunctional settings
With the SCREEN menu, the items shown in the table 
below can be performed.
Choose an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
referring to the following table.
SCREEN menu
ItemDescription
LANGUAGE
Using the buttons ▲/▼ switches the OSD (On Screen Display) language.
SUOMI  POLSKI TÜRKÇE...

42

Multifunctional settings
SCREEN menu (continued)
ItemDescription
START UP
Using the buttons ▲/▼ switches the mode for the start up screen. The start up screen is a screen displayed when no signal or an unsuitable signal is detected.
MyScreen   ORIGINAL  TURN OFF      
MyScreen is a screen you can register as a desired screen. The 
ORIGINAL screen is the existing standard screen. When the TURN 
OFF is selected, the BLACK screen is used.
• To avoid remaining as an afterimage, the MyScreen and the...

43
ENGLISH

Multifunctional settings
SCREEN menu (continued)
ItemDescription
MyScreen Lock
Using the buttons ▲/▼ turns on/off the MyScreen lock function.
TURN ON  TURN OFF
When the TURN ON is selected, the item MyScreen is locked. Use 
this function for protecting the current MyScreen.
MESSAGE
Using the buttons ▲/▼ turns on/off the message function.
TURN ON   TURN OFF
When the TURN ON is selected, the following message function 
works. 
“AUTO IN PROGRESS” while automatically adjusting 
”NO INPUT IS...

44

Multifunctional settings
With the OPTION menu, the items shown in the table 
below can be performed.
Choose an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
referring to the following table.
OPTION menu
ItemDescription
AUTO SEARCH
Using the buttons ▲/▼ turns on/off the automatic signal search function.
TURN ON   TURN OFF
When...

45
ENGLISH

Multifunctional settings
OPTION menu (continued)
ItemDescription
FILTER TIME The filter time is the time counted after the last resetting. It is shown 
in the OPTION menu as the usage time of the air filter. Performing 
this item resets the time. 
Pressing the RESET button on the remote control or the button ► 
on the projector displays a dialog to make sure. 
To perform reset, point at RESET using the button ▲.
RESET 
 CANCEL
• Please reset the filter time only when you have cleaned or...

46

Multifunctional settings
OPTION menu (continued)
ItemDescription
SERVICE
GHOST
1.  Choose a color element of ghost using the buttons ◄/►.
2.  Adjust the chosen element using the buttons 
▲/▼ to disappear ghost.
FILTER MESSAGE
Using the ▲/▼ button to set the timer for the interval to show the 
message for cleaning up the air filter.
50h  100h  200h  300h   TURN OFF
Selecting TURN OFF displays a dialog. While displaying the dialog, 
press the ENTER button on the remote control or the INPUT button...

47
ENGLISH

Maintenance
Maintenance
Lamp
Disconnect the plug from the power outlet
   WARNING      HIGH VOLTAGE              HIGH TEMPERATURE          HIGH PRESSURE
►The  projector  uses  a  high-pressure  mercury  glass  lamp. The  lamp  can break 
with  a  loud  bang,  or  burn  out,  if  jolted  or  scratched,  handled  while  hot,  or  worn 
over  time.  Note  that  each  lamp  has  a  different  lifetime,  and  some  may  burst  or 
burn  out  soon  after  you  start  using  them.  In  addition,...

48

Maintenance
In the case of replacement by yourself, A lamp has a finite product life. Using the lamp for long periods of time could 
cause the pictures darker or the color tone poor. Note that each lamp has a 
different lifetime, and some may burst or burn out soon after you start using them. 
Preparation of a new lamp and early replacement are recommended.
To prepare a new lamp, contact your dealer and tell the lamp type number.
   Type number = DT00707
1.Turn the projector off, and unplug the power...