Hitachi Pj-Lc9 Projector Users Manual

29
ENGLISH

Multifunctional settings
(2) Advanced MENU → One of Advanced menus (ex. SETUP menu)
3.To choose the target item
Point at one of choices on the menu using the cursor buttons▲/▼. In an 
Advanced menu, then press the cursor button ► or the ENTER button.
(1) In the EASY MENU (ex. KEYSTONE) (3) Advanced MENU → EASY MENU
(2) In an Advanced menu (ex. KEYSTONE)
Advanced MENU(PICTURE is pointed at.)
MENU [RGB]:SELECTPICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
UBRIGHT
CONTRAS
T
GAMMA
COLOR TEMP...

30

Multifunctional settings
4.To operate
Please follow of the mention concerned in each. In general,
(1) In the EASY MENU, use the cursor buttons ◄/► to operate.
(2) In the Advanced MENU, use the cursor buttons ▲/▼.
5.To return to the previous menu
Press the cursor button ◄ or the ESC button.
(1) One of Advanced Menus (ex. SETUP menu) → Advanced MENU
(2) Dialogs for operation (ex. KEYSTONE) → Advanced MENU
6.To reset
(1)  Each item:
 
Press the RESET button while operating.
(2)  Items of EASY MENU (at...

31
ENGLISH

Multifunctional settings
With the EASY MENU, the items shown in the table below 
can be performed.
Choose an item using the cursor buttons ▲/▼ on the 
projector or remote control. Then perform it referring to the 
following table.
EASY MENU
ItemDescription
ASPECTUsing the buttons ◄/► switches the mode for aspect ratio.
See the ASPECT item in the IMAGE menu. (36)
ZOOMUsing the buttons ◄/► adjusts the zoom.
See the ZOOM item in the SETUP menu. (40)
KEYSTONE
Using the buttons ◄/► corrects the...

32

Multifunctional settings
EASY MENU (continued)
ItemDescription
SHARPNESSUsing the buttons ◄/► adjusts the sharpness.See the SHARPNESS item in the PICTURE menu. (34)
WHISPERUsing the buttons ◄/► turns off/on the whisper mode.
See the WHISPER item in the SETUP menu. (40)
MIRRORUsing the buttons ◄/► switches the mode for mirror status.
See the MIRROR item in the SETUP menu. (40)
RESET Performing this item resets all of the items of EASY MENU except 
FILTER TIME and LANGUAGE. Pressing the button ►...

33
ENGLISH

Multifunctional settings
With the PICTURE menu, the items shown in the table 
below can be performed.
Choose an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
referring to the following table.
PICTURE menu
ItemDescription
BRIGHTUsing the buttons ▲/▼ adjusts the brightness. :    Light  Dark
CONTRASTUsing the buttons ▲/▼...

34

Multifunctional settings
PICTURE menu (continued)
ItemDescription
COLOR TEMP
Using the buttons ▲/▼ switches the  mode of color temperature.
   HIGH  MIDDLE
                      
CUSTOM  LOW
Selecting the CUSTOM and then pressing the  button ► or the ENTER button displays a dialog  
to aid you in adjusting the OFFSET and/or GAIN  
of the CUSTOM mode.
OFFSET adjustments change the color intensity 
 on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity on 
 the...

35
ENGLISH

Multifunctional settings
PICTURE menu (continued)
ItemDescription
PROGRESSIVE
Using the buttons ▲/▼ switches the progress mode.
TV  FILM  TURN OFF
     
• This function is performed only for an interlaced signal of a VIDEO input, an S-VIDEO input or a component video input of 525i (480i) or 625i (576i) signal.
• When the TV or FILM is selected, the screen image will be sharp. 
The FILM mode can also be used for the 2-3 Pull-Down conversion system (not be used for the 2-2 Pull-Down system)....

36

Multifunctional settings
With the IMAGE menu, the items shown in the table below 
can be performed.
Choose an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
referring to the following table.
IMAGE menu
ItemDescription
ASPECT
Using the buttons ▲/▼ switches the mode for aspect ratio. 
For an RGB signal
4:3  16:9  NORMAL   
For a...

37
ENGLISH

Multifunctional settings
IMAGE menu (continued)
ItemDescription
OVER SCAN
Using the buttons ▲/▼ adjusts the over-scan ratio.
Large (It reduces picture)  Small (It magnifies picture)
• This item can be chosen only for a video signal.• When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small.• The number displayed on the menu during this adjustment is just for your reference, and might not be exact display ratio.
V...

38

Multifunctional settings
IMAGE menu (continued)
ItemDescription
AUTO ADJUST 
EXECUTE
Choosing this item performs the automatic adjustment feature.
For an RGB signalThe vertical position, the horizontal position, the clock phase and 
the horizontal size will be automatically adjusted. And the aspect 
ratio will be automatically selected.  Make sure that the application window is set to its maximum size 
prior to attempting to use this feature. A dark picture may still be 
incorrectly adjusted. Use a...