Hitachi L42vc04u J Manual

English   - 29 -
cancel, press  BLUE 
 button. The following menu 
will be displayed during the automatic tuning: 
 
 
  After APS  is fi nalized, the programme table 
will appear on the screen. In the programme 
table you will see the programme numbers and 
names assigned to the programmes.
If you do not accept the locations and/or the 
programme names, you can change them via 
the program table. 
  Manual Channel Scan 
  In manual channel scan, the number of the 
multiplex is entered manually and only...

English   - 30 -
  
  Select your  Country 
,  Language 
 and  TXT 
Language 
 by using “
” or “” and “” or “” 
buttons. Press  OK 
 or  RED 
 button to continue. To 
cancel, press  BLUE 
 button. The following menu 
will be displayed during the automatic tuning: 
 
 
  After APS  is fi nalized, the programme table 
will appear on the screen. In the programme 
table you will see the programme numbers and 
names assigned to the programmes.
If you do not accept the locations and/or the 
programme names, you...

English   - 31 -
 
Film Mode 
  Films are recorded at a different number 
of frames per second to normal television 
programmes. 
  Press “
” or “” button to select  Film Mode .
Press “
” or “” button to set this feature On 
or Off. 
Turn this feature on when you are watching.
fi lms to see the fast motion scenes clearly. 
  Game Mode 
  Select  Game Mode 
 by pressing “
” or “
” button. Use “” or “” button to set Game 
Mode as  On 
 or  Off 
. When Game Mode is set 
to On, specific game mode settings,...

English   - 32 -
 
Balance 
  This setting is used for emphasizing left or right 
speaker balance.
Press “
” or “” button to select Balance. 
Press “
” or “” button to change the level of 
the balance. Balance level can be adjusted 
between -32 and + 32. 
  Headphone 
  Press “
” or “” button to select  Headphone 
. 
Press “
” button to view the headphone 
menu.
Headphone sub-menu options are described 
below: 
  Volume 
  Press “
” or “” button to select  Volume 
. Press  
 
“
” button to increase...

English   - 33 -
 
Pip-Pap 
  This line controls Pip/Pap modes. Use “
” or “” 
buttons to switch the TV to  Pip 
,  Pap 
 or  Off 
.  
  Pip Size 
  Using this setting, you can set the size of the 
Pip window. Press “
” or “” button to highlight 
Pip Size item. Use “
” or “” button to set Pip 
Size to Small or Large. 
   
Note 
: This setting will be inactive if the TV is set to 
Pap mode. 
  PIP Position 
  This setting is used for moving the sub 
picture.
Select PIP Position  item by using “
” or 
“
”...

English   - 34 -
 
  
 
  
Ext Out 
  Press “
” or “” button to select Ext Out. Use “
” or “” button to set the Ext Out as On or Off. 
 
 
Note :
For copying from a DVD or VCR device, you should 
choose desired source from source menu and turn 
“On” to EXT Out from feature menu. 
   
Install Menu 
  
  Program 
  Press “
” or “” button to select Program. Use  
“
” or “” button to select the program number. 
You can also enter a number using the numeric 
buttons on the remote control. There are 200...

English   - 35 -
 
By moving the cursor in four directions you can 
reach 20 programmes in the same page. You 
can scroll the pages up or down by pressing the 
navigation buttons to see all the programmes 
in TV mode (except for the AV modes). By 
cursor action, programme selection is done 
automatically. 
  Name 
  To change the name of a programme, select the 
programme and press the  RED 
 button.
The fi rst letter of the selected name will be 
highlighted. Press “
” or “” button to change 
that letter...

English   - 36 -
 
   
 
 
 PC Mode Menu System 
 
See “Connecting the LCD TV to a PC” section 
for connecting a PC to the TV set.
For switching to PC source, press “
SOURCE” 
button on your remote control and select PC 
input. You can also use “Source” menu to switch 
to PC mode. 
 
Note that PC mode menu settings are available only 
while the TV is in PC source. 
  PC Position Menu 
Press “M” button.
 
Select the first icon by pressing “” or 
“
” button. PC Position menu appears on the 
screen:...

English   - 37 -
displayed on the screen when a new programme 
is entered or “INFO” button is pressed.  
 
 
 
Mute Function 
 
Press “” button to disable sound. Mute 
indicator will be displayed in the upper side of 
the screen. 
  To cancel mute, there are two alternatives; the 
fi rst one is pressing the “
” button and the 
second one is increasing the volume level.  
 
 
PIP (Picture-in-Picture) and 
PAP (Picture-and-Picture) 
Modes 
  Press the “” button to switch to PIP mode.
In PIP Mode, a small...

English   - 38 -
  
 
Panoramic 
 
This stretches the left and right sides of a normal 
picture (4:3 aspect ratio) to fill the screen, 
without making the picture appear unnatural. 
 
 
  The top and bottom of the picture are slightly 
cut off. 
  14:9 
 
This zooms up the wide picture (14:9 aspect 
ratio) to the upper and lower limits of the 
screen. 
 
 
  Cinema 
 
This zooms up the wide picture (16:9 aspect 
ratio) to the full screen. 
 
 
  Subtitle 
 
This zooms up the wide picture (16:9 aspect...