Hitachi L42vc04u J Manual

English   - 19 -
 
 
Initial Settings 
 
When the TV set is operated for the fi rst  time, 
the IDTV turns on fi rst.
Because this is the fi rst time the TV is used, 
there are no channels stored in the memory.
When the TV is turned on for the fi rst time, the 
menu for the language selection appears on the 
screen. The message “Welcome please select 
your language!” is displayed in all language 
options sequentially in the 
OSD.
By pressing the “” or “” buttons highlight 
the language you want to set and...

English   - 20 -
For more information on this process, see 
“Install Menu” section. 
   
Note 
: For proper functioning of digital teletext in DTV 
mode, you should set country as UK in analogue 
AUTO PROGRAM (for UK only).  
 
 
 
 
 
 
 
General Operation
 
 
Pressing the “TV/DTV” button at any time 
while watching television programmes will 
switch the TV set between the digital terrestrial 
television broadcasting and normal analogue 
broadcasting. 
  Information Banner 
 
• Whenever you change...

English   - 21 -
 
 
• Press  “0” 
 button to view Guide Search 
menu. Using this feature, you can search the 
programme guide database in accordance 
with the genre 
selected or with name match. 
Info available in the programme guide will be 
searched and results matching your criteria 
will be listed.  
You can select programmes or 
set timers by highlighting a channel and then 
pressing “OK” button.
 
Note: Searching process can be performed by the 
desired date rate or by the channel basis....

English   - 22 -
 
Channel List
 
 
Using the “” or “” button on the remote 
control, make sure that the fi rst item, Channel 
List, is highlighted and press the OK button to 
display the Channel List.
The following operations can be performed in 
this menu:
   
• Navigating the entire list of channels
• Deleting channels
• Renaming channels
• Adding locks to channels
• Setting favourites
• Moving channels 
  Channel List is the place where the channels 
are managed. 
 
 
  Navigating the Entire Channel...

English   - 23 -
 
Press “” or “” button to highlight the desired 
option. If  OK 
 button is pressed while “ Ye s 
” is 
highlighted, the highlighted channel is deleted. 
Selecting “ No 
” cancels the deletion.
   
Renaming Channels 
  To rename a specifi c channel, the channel must 
be highlighted by pressing “
” or “” button. 
Then highlight the  Edit Name 
 item by pressing  
“
” or “” button as illustrated below. Press the 
  OK 
 button to activate the rename feature.
   
 
  Now pressing “
” or “”...

English   - 24 -
  
  Program Guide 
  This section is same with the instructions given 
in the General Operations page. Please see 
Electronic Programme Guide (EPG) section in 
the General Operations part. 
  Timers 
  
  To display timers window, activate the item 
from the main menu. To add a timer, press the 
  YELLOW 
 button on the remote control. Then  
“Add Timer” window appears. 
   
Channel 
: “
” or “” keys will navigate the user 
through the 
list.
  Date 
: Starting date is entered via the...

English   - 25 -
• When no module is inserted, “No Conditional 
Access
 module detected” message appears 
on the screen.
• Refer to the module instruction manual for 
details of the settings. 
Note: Insert or remove the CI module only when the 
TV is in STAND-BY mode or SWITCHED OFF.
  TV Setup 
 
You can use this item to display the TV 
functions.
The digital TV Setup menu screen is accessed 
from the main menu. Press the  “M” 
 button to 
display the main menu and use “
” or “” button 
to highlight “TV...

English   - 26 -
Use “” or “” button to select Scan Encrypted 
and then press 
“” or “” button to set this 
setting as On or Off.
  Receiver Upgrade 
  Over Air Download (OAD) 
  To ensure that your TV always has the most 
update information, use this setting. Please 
ensure that the TV is set to standby mode. The  
TV automatically powers up at 3.00 A.M. each 
day and searches for any new information which 
may be broadcast and will download this to 
your receiver automatically. This operation will...

English   - 27 -
  
Time Settings
In the configuration menu, highlight the Time 
Settings item by pressing 
“” or “” buttons. 
Press OK and Time Settings sub menu will be 
displayed on the screen. Current Time,Time 
Zone Setting and Time Zone will be available.
Use 
“” or “” buttons to highlight the Time 
Zone
Setting. Time Zone Setting is set using 
“” or “
” buttons. It can be set to AUTO or MANUAL. 
When AUTO is selected, Current Time and 
Time
Zone options will not be available to be set. If 
MANUAL...

English   - 28 -
•  Subtitle 
: alter the subtitle language with “
” or “” keys. The chosen language will be 
seen in subtitles.
•  Guide 
: By pressing “
” or “” buttons change 
the guide language. 
  Current 
  •  Audio 
:  if audio language is supported change 
the audio language by pressing “
” or “” 
buttons 
•  Subtitle 
: if 
subtitles are supported, alter the 
subtitle language with “
” or “” buttons. The 
chosen language will be seen in subtitles. 
Note: If the Country option is set to Denmark,...