Hitachi L37x01a Users Manual

20
CONNECTION (continued)
Connecting Procedure (continued)
AV 5 can be connected to the equipment with S-video output and composite output. 
 If your external device has S-video terminal, S-VIDEO connection is recommended for higher quality picture.
NOTE
If both S-video and video input terminals of AV5 are connected at the same time, S-video will have its priority.
HDMI 1
terminal can be connected to the devices with HDMI output. If the external device has DVI output, this can be available 
with HDMI-DVI...

21
ENGLISH
CONNECTION (continued)
Connecting Procedure (continued)
Photo Input terminal can be connected to a digital still camera or USB card reader with USB cable. For details, refer 
to the Photo Input function shown on 
65~69.
SD Memory Card slot can be used for the Photo Input function with the SD (or MMC) card memory containing 
pictures. For details, refer to the Photo Input function shown on 
65~69.
IN
NOTE
This photo input terminal does not support general USB devices such as USB memory. 
Please...

22
Information
How to secure the cables.
After connecting all of the cables to the terminals, secure them with the clamps.
When you secure the cables, please be careful not to tighten too much.
CAUTION
Use only the Power Cord provided.
Do not use a power supply voltage other than that indicated (AC220-240V, 50Hz). It may cause fi re or electric shock.
For the LCD television, a three-core power cord with a ground terminal is used for effi ciency protection. Always be sure 
to connect the 
Power Cord to a...

23
ENGLISH
BASIC OPERATION
Power On/Off
Now, turn On the main power to the unit. Make sure that the power cord is 
plugged into the wall socket.
 To turn On the power of  the unit:
1.Press the Main Power switch on the unit.
  The Indicating Lamp will illuminates in Red (Standby mode).
2.PressSub Power button either on the control panel or on the remote control.
•  The colour of the Indicating Lamp turns into Blue, and the image will be 
displayed on the screen. 
 To turn Off  the power of  the unit:...

24
BASIC OPERATION (continued)
Easy Setup
When you turn ON the TV for the fi rst time, your TV automatically leads 
to the settings of “Language,” “Target,” and “Country (TV and DTT).” 
(Also, refer to the attached Quick Guide.)
The integrated DVB-T tuner will only receive MPEG2 compressed 
signals. Thus, it will not work with MPEG4 signals.
Hitachi can't guarantee the functionality of the integrated DVB-T 
tuner in case of a change of the DVB-T standard.
1.The fi rst screen appeared will ask you to...

25
ENGLISH
Channel Up/Down button
BASIC OPERATION (continued)
Channel Selections
There are 4 ways to select the channels: stepping through the channel, selecting by number, selecting from the 
on-screen channel list, and using the Electronic Programme Guide (EPG).
Press
P- + button on the remote control or Channel Up/Down button on the 
control panel to switch the next or previous channel on the list. Information 
banner is displayed every time channel is switched.
Refer to
55 about the information...

26
BASIC OPERATION (continued)
Volume Up/Down
1.To increase the sound volume, press  button on the remote control, 
orVolume Up button on the control panel.
The Volume Indicator value on the screen will shift right. 
2. To decrease the sound volume, press 
 button on the 
remote control or Volume Down button on the control panel.
The Volume Indicator value on the screen will shift left.
Mute
1. To mute the sound, press  button on the remote control.
The sound of the unit is temporarily turned Off.
The...

27
ENGLISH
BASIC OPERATION (continued)
Input Switching to DTT/TV/AV1~5/HDMI1~3/RGB
There are several ways to change the input mode as mentioned below. 
Please select your preferred way.
z You can select DTT and TV mode directly.
Press button on the remote control. Each time the button is pressed, 
the mode is switched between DTT and TV mode.
z Display Input Switching Banner to select the input mode.
  1.Press
 button on the remote control or Input Select button on 
the control panel to display Input...

28
English      Spanish
30min.
01h 59m
17:
45
ABTV1210
30min.
01h 59m
17:
45
ABTV              1
30min.
01h 59m
17:
45
AV1
ComponentAVVIDEOChannel number DTT
TVAudio language
*1
Subtitle language (DVB)*1
Channel lock (if selected)
Off-timer
On-timer
Current time
*2
Channel name and TV position
Off-timer
On-timer
Current time
*2
Input mode
Signal mode
Off-timer
On-timer
Current time
*2
*1 If the programme provides special audio/subtitle (DVB) service, icons may appear. See55 for details.
*2 If time signal...

29
ENGLISH
MENU OPERATION
How to use On-Screen Display (OSD) system
With the On-Screen Display system, you can access the various kinds of the features and functions in this product.
There are two setting menus of Main Menu and Function Menu. As usage, pressMENU button to show Main Menu or FUNCTION button to show Function Menu.

Main Menu button
Menu
Picture
Audio
Channel Manager
Configuration
Initial Setup
Select          Enter           Return
Function Menu
Favourite
Programme Search
Timers
Lock &...