Hitachi L32hp01 Instructions For Use

- 10 -
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power cord to the system. Press Power
On/Off switch. Then the TV switches itself to
stand-by mode (optional).
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the -P/CH
or P/CH+ button on the TV or press the P+ or P-
butt on on the remote control, so that last mode
switched off is selected.
By either method the...

- 11 -
Country
Language
UKOk
Cancel PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM TXT Language
Auto Program
By pressing _ / ` button, adjust the Country item and
pressb to highlight Language item. Use _ / ` button
to setLanguage. Use 
_ / ` buttons to select TXT
Language and set it by using 
_ / ` buttons. Press
OK button to continue:
UK
P 03 - C 0463.75 MHz
6%
63.75 MHz
Cancel
APS is running...
After AP S is finalized, a programme list will appear on
the screen. In the programme list you will see...

- 12 -
Everyday Operation
Pressing the  button at any time while watch-
ing television programmes will switch the TV set be-
tween displaying the digital terrestrial television broad-
casting and its normal analogue broadcasting.
Information Banner
Whenever you change channel, using the P- / P+
button or the digit buttons, TV displays the channel
picture along with an information banner at the bottom
of the screen. This will remain on the screen for ap-
proximately three seconds. The information banner...

- 13 -
• If you press   button you can see the detailed
help information easily. And by pressing 
button
again you can exit Help menu.
• The starting time for  EPG is the current time.You can
see the event information for the next two hours. By
pressing 
a / b button, you can go to the next/
previous hours while Programmes list is highlighted.
• lf you press the  OKbutton when a next event is
highlighted, a reminder is set for the highlighted
programme and a clock appears on the screen.
Programme...

- 14 -
IDTV Menu System
The IDTV menu can only be shown when watching
Digital terrestrial broadcasting. Press the
 but-
ton to turn IDTV on while TV is in analogue mode.
Press the
button. The menu below appears on the
screen:
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
Channel List
Using the a / b button on the remote control in Main
menu, make sure that the first item, Channel List, is
highlighted and press the OKbutton to display the
Channel List.
The...

- 15 -
SELEC TiSE LEC T
CHANNEL LIST                                      1                               BBC ONE
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
DeleteEdit NameLock Favourites
FunctionSelect Channel Watch More
Now  pressing _ / `button moves to the previous/
next character. Pressing 
a / b button toggles the
current character, i.e., ‘b’ character becomes ‘a’ by
band ‘c’ by a. Pressing the numeric buttons ‘0...9’...

- 16 -
Installation
The Installation menu mainly intends to help you for
building a Channel Table in the most efficient way.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
This menu includes the following items:
1. Add New  Channels
2. First Time Installation.
ADD NEW CHANNELS:
This tuning menu consists of two parts:
x Automatic Search
x Manual Search
Installation
Add New Channels
First Time InstallationAutomatic Search
Manual Search
Automatic Search
Automatic...

- 17 -
First of all choose Language,Country and TXT Lan-
guage by using 
a / b and _ / ` buttons. This will
affect the sort process in APS. To start APS press  OK
button:
UK
P 03 - C 04 63.75 MHz
6%
63.75 MHz
Cancel
APS is running...
After APS is finalized, the programme table will ap-
pear on the screen. In the programme table you will
see the programme numbers and names assigned to
the programmes.
If you do not accept the locations and / or the
programme names, you can change them in the Pro-
gram...

- 18 -
There are two possibilities for Receiver software to
be upgraded: automatic and manual.
i
CONFIGURATION
Audio Language
Subtitle
Favourite Mode
EPG Preference
Receiver Upgrade
Parental SettingsEnglish
Off
Off
Now&Next
V. 1 . 5
Exit
More
Automatic Download
Search for New Version    Enabled
MENU
Automatic Download (Automatic upgrade)
Automatic Download can be enabled or disabled
by pressing 
_ / ` button. If it is enabled, then there are
two ways for automatic upgrade. The first one is
checking the...

- 19 -
Up to five separate timer events can be set and each
is displayed in the Timer screen, showing the event
number, the channel to be selected, the start time, end
time, date and the mode - whether that event is active
(and will be acted on) or not.
SELECTiMENU
TIMER MENUNo  Channel Name           Start     End     Date                  Mode
1.    ITV 1                          20:00   21:00  12/05/2005         Active
2.    BBC ONE                  00:00   00:00   01/01/2005        Inactive
3....