Hitachi L32hp01 Instructions For Use

							- 10 -
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power cord to the system. Press Power
On/Off switch. Then the TV switches itself to
stand-by mode (optional).
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the -P/CH
or P/CH+ button on the TV or press the P+ or P-
butt on on the remote control, so that last mode
switched off is selected.
By either method the TV will switch on.
To switch the TV off:
• Press the “ (stand-by)” button on the remote con-
trol or On/Off switch on the TV, so the TV will switch
to stand-by mode.
To power down the TV completely, press On/Off
switch
or,
Unplug the power cord from the mains socket.
Navigating the Menu System
MENU
GUIDE
RETURN
OK
+
For Displaying 
Menu Options
For Navigation
To Confirm Choices
1- Press  to display the menu.
2- Press 
_ / ` button to select an icon.
3- Use 
a / b  button to highlight.  Press ` for more
options in analogue TV mode. Use OK in DTV mode
for viewing a submenu.
4- Press 
_ / `  buttons to change the settings. Press
OK to set as default.
5- To exit the menu or return from sub-menu screen,
press 
.
These explanations are available for the navigation
of the whole menu system. To select options that are
explained in the following parts, refer to “Navigating
The Menu System”.
Initial Settings
When the TV is turned on for the first time, it is in the
digital mode.
Because this is the first time the TV is used, there are
no channels stored in the memory and the following
message appears on the screen.
Please ensure aerial is plugged in.
 Do you want to start first time installation?
Ye s
No
• To start installation process, select Ye s ,  to cancel
select No.
• To select an option Ye s  or No, highlight the item by
using 
_ / ` buttons and press theOKbutton.
The IDTV will automatically tune to the UHF transmision
channels 21 to 68 looking for digital terrestrial TV broad-
casts and displaying the names of channels found.
This process will take about five minutes. To cancel
searching, you can press the 
 button at any time
during the process.
MENU
BBC ONE
BBC TWO
BBC CHOICE
Searching UHF channels 30. Please wait. This will take a few minutes
Cancel searching
AUTOMATIC SEARCH
Channels:
12 %
After Automatic Search process is completed, the
following message asking for analogue channel search
appears on the screen. TV switches to the analogue
TV mode.
Yes 
Do you want to search for
analogue channels?
No 
To seach for analogue channels, select Ye s. The
menu below is displayed to search for analogue chan-
nels.
 
						

							- 11 -
Country
Language
UKOk
Cancel PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM TXT Language
Auto Program
By pressing _ / ` button, adjust the Country item and
pressb to highlight Language item. Use _ / ` button
to setLanguage. Use 
_ / ` buttons to select TXT
Language and set it by using 
_ / ` buttons. Press
OK button to continue:
UK
P 03 - C 0463.75 MHz
6%
63.75 MHz
Cancel
APS is running...
After AP S is finalized, a programme list will appear on
the screen. In the programme list you will see the
programme numbers and names assigned to the
programmes.
If you do not accept the locations and / or the
programme names of programmes, you can change
them in Install Menu. For details see Install Menu
section.
To display channel list in IDTV, switch to the IDTV via
pressing the
 button. Then press the  but-
ton to enter main menu, Channel List will be high-
lighted. Press the OK button to enter the menu.
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the buttons on the TV
Volume Setting
• Press  -  button to decrease volume or  +
button to increase volume, so a volume level scale
(slider) will be displayed at the middle of the bottom
on the screen.
Programme Selection
• Press P/CH +button to select the next programme or
P/CH - button to select the previous programme.
Entering Main Menu
• Press the MENU button to enter Main menu. In the
Main menu select sub-menu using P/CH - or P/CH +
buttons and enter the sub-menu using 
 - or
 + buttons. To learn the usage of the menus,
refer to the Menu System sections.
Operation with Remote Control
The remote control of your TV is designed to control
all the functions of the model you selected. The func-
tions will be described in accordance with the menu
system of your TV.
Functions of the menu system are described in the
following sections.
Volume Setting
Press   + button to increase volume. Press   -
button to decrease volume. A volume level scale
(slider) will be displayed in the middle at the bottom of
the screen.
Programme Selection (Previous or next
programme)
• Press P- button to select the previous programme.
• PressP+ button to select the next programme.
Programme Selection (direct access)
Press digit buttons on the remote control to select
programmes between 0 and 9. TV will switch to the
selected programme. To select programmes between
10 - 999 (for IDTV) or 10-99 (for analogue), press the
digit buttons consecutively which programme you
want to select (eg. for programme 27, first press 2
and then 7). When it is late to press second digit
button only the first digit programme will be displayed.
The limit of the delay time is 3 seconds.
Press directly the programme number to reselect single
digit programmes.
 
						

							- 12 -
Everyday Operation
Pressing the  button at any time while watch-
ing television programmes will switch the TV set be-
tween displaying the digital terrestrial television broad-
casting and its normal analogue broadcasting.
Information Banner
Whenever you change channel, using the P- / P+
button or the digit buttons, TV displays the channel
picture along with an information banner at the bottom
of the screen. This will remain on the screen for ap-
proximately three seconds. The information banner
can also be displayed at any time while watching TV
by pressing the
 button on the remote control.
Now:  50/50
Next: Ace Lighting
1.     BBC ONESignal Level:
13:15 09:25 - 11:00
11:00 - 11:25
The information banner gives a number of facts on
the channel selected and the programmes on it. The
name of the channel is displayed, along with its chan-
nel list number and an indication of the strength of the
signal received on this tuning channel.
Hint
Not all channels broadcast the programme
data. If the name and times of the programmeis
not available then “No Information Available”
are displayed in the information banner.
Icons are also displayed in the information banner
and if this channel  is a favourite channel:
Favourite channel icon 
.
If the selected channel is locked, you must enter the
correct four digit code to view the channel.
Enter Lock Key
Electronic Programme Guide (EPG)
Some, but not all, channels send information about
the current and next events. Please note that event
information is updated automatically. If there is no event
information data available in channels, only channel
names with “No Information Available” banner is
displayed.
• Press GUIDE button to view the EPG menu.
• In EPG Menu, you can easily see the extended help
information by pressing INFO button and by pressing
this button again you can close this window.
ITV News                   14:00-15.00
30. CBBC Channel   Chuckle Vision                Tracy Beaker
40. BBC NEWS 24   BBC News                       BBC News
41. ITV News            ITV News                         ITV News
50. Four Text            No Information                 No Information
51. BBCi                   BBCi                                BBCi
Current Reminder7 Day EPG
More
51                                     BBCi
ELECTRONIC PROGRAMME GUIDE(Now&Nex t)        Saturday 21/8 13:48
Channels                 Current Programme        Next Programme
MENUNavigate
Rolling national and international news 
including breaking news as it happens,
business updates, sports results and 
weather summaries.
• In the EPG Menu all channels are displayed. Current
channel is highlighted. Use 
a / b buttons to change
channels. Also  press RED or GREEN buttons to make
page up/down scroll for the channels.
• If you highlight an event, short event description,
extended event description, start and finish times of
event are displayed on the screen.
• When the current programme is highlighted, the box
is switched to the highlighted channel by pressing
the OKbutton.
• If you press theOKbutton when a next event is
highlighted, a reminder is set for the highlighted
programme and a clock appears across the high-
lighted channel line.
Programme reminders can be set to signal that a
programme is about to start when you are watching
another channel. If you set reminder to a programme,
then you will be asked for switching to that channel
when the reminder time is reached.
• Press the
  button to view the 7 day EPG..
• Press 
a / b button to navigate in Channels or
Pr og ram m es.
• Press 
_ / ` button to navigate through the channel
and programme list.
Chuckle Vision                                                         13:00-14:00
30. CBBC Channel     13:00 Chuckle Vision (Now)
40. BBC NEWS 24        14:00 Tracy Beaker
41. ITV News               14:55 Newsround
50. Four Text          
800. BLUE/LEFT 1k...
801. CCIR17/1kHz...
ELECTRONIC PROGRAMME GUIDE(7 Day)                    Saturday 21/8 13:49
Channels                   Programmes on Saturday 21/8,  13:00 - 15:00Triple bill. In the Ring/Romany Days/On the Radio: Paul and Barry
grapple with the world of wrestling; hunt for a mysterious Emperors
underpants; and record their first pop song.
IMore Change DayNavigate Change Time
• With RED/GREEN buttons you can change schedule
time. By pressing  YELLOW/BLUE  you can ad-
vance the schedule backward / forward of a day.
 
						

							
- 13 -
• If you press   button you can see the detailed
help information easily. And by pressing 
button
again you can exit Help menu.
• The starting time for  EPG is the current time.You can
see the event information for the next two hours. By
pressing 
a / b button, you can go to the next/
previous hours while Programmes list is highlighted.
• lf you press the  OKbutton when a next event is
highlighted, a reminder is set for the highlighted
programme and a clock appears on the screen.
Programme reminders can be set to signal that a
programme is about to start when you are watching
another channel. If you set reminder to a programme,
then you will be asked for switching to that channel
when the reminder time is reached.
Newsround                                                             16:55-17:00
30. CBBC Channel     15:00 Even Stevens
40. BBC NEWS 24        15:50 Newsround Showbiz
41. ITV News               16:00 Basil Brush
50. Four Text               16:55 Newsround
51. BBCI
800. BLUE/LEFT 1k...
801. CCIR17/1kHz...
ELECTRONIC PROGRAMME GUIDE(7 Day)                    Saturday 21/8 13:51
Channels                   Programmes on Saturday 21/8,  15:00 - 17:00
CBBC joins the Newsround team, keeping you up to date on the latest
stories and events happening at home and abroad.
iMore
Change DayNavigate Change Time
Displaying The Subtitles
With Digital terrestrial broadcasting (DVB-T), some
programmes are broadcast with subtitles. Subtitles
can be displayed when watching these programmes.
Press the 
 button to display the Main menu, high-
light the Configuration line using 
a / b button
andpress the  OKbutton to display the Configuration
menu.
Highlight the  “Subtitle” item in Configuration menu
and use 
_ / ` button to set Subtitle to off or a lan-
guage.
If  “Subtitle”  is on via selecting one language option,
pressing the
button causes the following warn-
ing message display on the screen.
Interactive services cannot be used
while subtitles are on. Would you like
to turn subtitles off now?
Yes                       No
Digital Teletext
With Digital terrestrial broadcasting (DVB-T), in addi-
tion to pictures and sound, you can also watch digital
teletext.
Digital teletext is sometimes broadcast at the same
time as normal broadcasting.
1. Press the 
 button.
The digital teletext information appears.
2.  Operate it with the coloured buttons, 
_ , `/ a , bbuttons and  OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed
on digital teletext screen.
• When “Press SELECT” button or similar message appears on the screen, press the  OK button.
• When the 
 (Text) button is pressed, the TV re-
turns to television broadcasting.
• With Digital terrestrial broadcasting (DVB-T), in addi- tion to digital teletext broadcasting at the same time
as normal broadcasting, there are also channels
with just digital teletext broadcasting.
• The aspect ratio when watching a channel with just digital teletext broadcasting is the same as the as-
pect ratio of the picture watched previously.
• When you press the 
 (Text) button again, the
digital teletext screen is displayed.
Over Air Download
To ensure that your IDTV always has the most up-to-
date information, please ensure that after use it is set
to its standby mode. At 3AM each day, the IDTV auto-
matically searches for any new information which
may be broadcast and will download this to your
IDTV automatically. This operation will normally take
approximately 30 seconds.
If you want to do this, you need to set Automatic
Download to  “Enabled” in Receiver Upgrade set-
ting. For details see  page 15.
Widescreen
Depending on the type of broadcast being transmitted,
programmes can be viewed in a number of formats.
Press the 
 button repeatedly to select between
Auto,16:9, 4:3, Panaromic, 14:9 Zoom, Cinema,
Subtitle  or Zoom.
When  Auto is selected, the format being displayed is
determined by the picture being broadcast.
Please Note: Menu size changes depending on the
chosen image size.
 
						

							- 14 -
IDTV Menu System
The IDTV menu can only be shown when watching
Digital terrestrial broadcasting. Press the
 but-
ton to turn IDTV on while TV is in analogue mode.
Press the
button. The menu below appears on the
screen:
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
Channel List
Using the a / b button on the remote control in Main
menu, make sure that the first item, Channel List, is
highlighted and press the OKbutton to display the
Channel List.
The following operations can be performed in this
menu:
1.   Navigating the whole list of channels
2.   Deleting channels
3.   Renaming channels
4.   Adding locks to channels
5.   Setting favourites
Channel List is the place where the channels are
managed.
SELECTiSELECT
CHANNEL LIST                                      1                               BBC ONE
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
Delete Edit Name Lock Favourites
FunctionSelect Channel Watch More
Navigating the whole channel list
Press a / bbutton for  selecting the previous or next
channel. You can press RED or GREEN button to move
page up or page down.
To watch a specific channel, highlight it using
a / bbutton and then press OKbutton, while the “Select”
item on Channel List menu is highlighted by using 
_ /
`.
Then the name and number of the selected channel
will be displayed in the top-left and top-right of the
channel display at the top-right of the screen, re-
spectively.
Deleting the channels in the channel list
Press a / bbutton to select the channel that will be
deleted.
Press 
_ / ` button to select the ‘’Delete’’ item on
Channel List menu. As seen on Channel List menu,
SELECT is written next to Delete item at the bottom
of the screen to indicate that press the OK button to
delete the highlighted channel in the channel list.
SELECTiSELECT
CHANNEL LIST                                      1                               BBC ONE
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
DeleteEdit Name Lock Favourites
FunctionSelect Channel Watch More
Press the OK button to delete the highlighted channel
in the channel list. Then the message below appears
on the screen.
The selected service will be permanently
deleted. Are you sure?
Ye sNo
Press _ / ` button to highlight the desired option. If OK
button is pressed while “Yes” is highlighted, the high-
lighted channel is deleted. Selecting “No” cancels the
delete operation.
Renaming channels
To rename a specific channel, the channel must be
highlighted via pressing 
a / bbutton and then high-
light the Edit Name item by pressing 
_ / ` button.
Press the OK to activate rename feature.
 
						

							- 15 -
SELEC TiSE LEC T
CHANNEL LIST                                      1                               BBC ONE
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
DeleteEdit NameLock Favourites
FunctionSelect Channel Watch More
Now  pressing _ / `button moves to the previous/
next character. Pressing 
a / b button toggles the
current character, i.e., ‘b’ character becomes ‘a’ by
band ‘c’ by a. Pressing the numeric buttons ‘0...9’
replaces the highlighted character with the charac-
ters printed above the button one by one as the but-
ton is pressed.
Press the 
 button to cancel the editing or OK button
to save the new name.
Adding locks to channels
Channel Locking provides a password-protected ac-
cess to channels selected by parents. In order to lock
a channel you should know the Parental Lock pass-
word (default value is set to 0000 in the factory and
can only be changed from the Configuration Menu).
Select the channel to be locked by highlighting it and
select the “Lock” option by pressing 
_ / ` button.
When the OK button is pressed, a password box is
displayed.
SELECTiSELECT
CHANNEL LIST                                      1                               BBC ONE
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
Delete Edit NameLockFavourites
FunctionSelect Channel Watch More
Enter Lock Key
Enter the password using the digit buttons on the
remote control. The Lock icon 
 will now be dis-
played next to the selected channel. Repeat the same
operation to cancel the Lock.
Setting Favourites
You can set various channels as favourites so that
only the favourite channels are navigated. To set a
favourite you should highlight the “Favourites” item
at bottom of the Channel List menu.
Use 
_ / ` button to highlight the Favourites item at
the base of the screen and then, in turn, highlight
each channel you want to add to the favourites list,
using the 
a / b buttons, and press the OK button.
A channel selected as a favourite appears in the main
channel list with a favourites icon  (
) against the
channel name.
SELECTiSELEC T
CHANNEL LIST                                      1                               BBC ONE
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
Delete Edit Name LockFavourites
FunctionSelect Channel Watch More
On Screen Help Pressing INFO Button
For all menus press the   button to display the help
information about the menu functions. For Channel
List menu the following message is displayed on the
screen.
 
						

							- 16 -
Installation
The Installation menu mainly intends to help you for
building a Channel Table in the most efficient way.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
This menu includes the following items:
1. Add New  Channels
2. First Time Installation.
ADD NEW CHANNELS:
This tuning menu consists of two parts:
x Automatic Search
x Manual Search
Installation
Add New Channels
First Time InstallationAutomatic Search
Manual Search
Automatic Search
Automatic search is started by pressing the OK but-
ton in the auto-search pop up menu. All the services
are searched and a channel table is created auto-
matically.
All channels found are stored in a sorted form with
respect to their channel numbers.  Some services
may not appear with the correct channel number.  At
the time of printing, not all broadcasters are sending
their channel number information.
Manual Search
In manual search, the number of the multiplex is en-
tered manually and only that multiplex is searched for
the channels. For every valid channel number, signal
level, signal quality and network name are shown at
the bottom  of the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
FIRST TIME INSTALLATION
The user can use this item to load default settings,
which had been loaded to the receiver at the factory.To install factory settings, highlight 
“First Time In-
stallation” menu and press the OK button, then you
will be asked to confirm for deleting all channels and
settings.
Installation
Add New Channels
First Time Installation
Your previous digital channel list will be destroyed.
Are you sure you want to delete all digital channels
and settings for first time installation?

By selecting YES and pressing the OK button, the
existing channel table will be deleted.
After  factory settings is loaded, “First Time Instal-
lation” menu will be displayed.
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes
No
Press the OK button to start installation. After search
is completed for digital channels, a message asking
search for analogue channels appears on the screen.
Yes 
Do you want to search for
analogue channels?
No 
Press the OK button to search for analogue
channels.The following menu appears on the screen
for analogue channel search.
Country
Language
UKOk
Cancel PLEASE CHECK ANTENNA CABLE
AUTO PROGRAMMING SYSTEM
TXT Language
Auto Program
 
						

							
- 17 -
First of all choose Language,Country and TXT Lan-
guage by using 
a / b and _ / ` buttons. This will
affect the sort process in APS. To start APS press  OK
button:
UK
P 03 - C 04 63.75 MHz
6%
63.75 MHz
Cancel
APS is running...
After APS is finalized, the programme table will ap-
pear on the screen. In the programme table you will
see the programme numbers and names assigned to
the programmes.
If you do not accept the locations and / or the
programme names, you can change them in the Pro-
gram menu.
Configuration
Press the  button to display the Main Menu and theb button twice to highlight Configuration, then press
the  OK button to display the Configuration menu. Press
the 
 button to leave the menu.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
The various configuration functions are displayed in a
list, along with a quarter-screen image of the currently
selected channel. You can select a function by high-
lighting the corresponding menu line using the 
a / bbutton.
i
CONFIGURATION
Audio Language
Subtitle
Favourite Mode
EPG Preference
Receiver Upgrade
Parental Settings English
Off
Off
Now&Next
V.1.5
Change Default Audio Language More
Audio Language
Digital terrestrial television channels can broadcast
simultaneous soundtracks in more than one language.
This function selects which language soundtrack you
will hear when switching to a channel broadcasting
with the multiple soundtracks.
Hi ghl ight  the Audio Language  line in the Configura-
tion menu and use the 
_ / ` button to cycle through
the language options.
Subtitle
Digital terrestrial television channels can broadcast
subtitles displayed on-screen for the hard-of-hear-
ing. This function selects the desired subtitle language
and enables the automatic display of subtitles when-
ever subtitle information is broadcast.
Highlight the Subtitle line in the Configuration menu
and use the 
_ / ` button to cycle through  “Off” and
language options.
Favourite mode
This function enables or disables the favourite chan-
nel list mode. See Channel List menu Favourites on
page 17 .
Use 
_ / ` button to turn on/off favourite mode. If the
“Favourite Mode”  is on, in normal operating mode
pressing “ P+” and “ P-” buttons will only navigate
through the channels that were previously defined
as favourites in Channel List.
EPG Preference
Digital terrestrial television channels can broadcast
simultaneous Next&Now and 7-Day electronic
programme.
Highlight the EPG Preference line in the Configuration
menu and use the 
_ / ` button to select  Next&Now or
7-Day.
Receiver Upgrade
The IDTV can be upgraded via the configuration menu,
entered from the main menu.
In the Configuration menu, highlight the  “Receiver
Upgrade” item by pressing 
a / b button and press
the OK button to start upgrade process.
 
						

							- 18 -
There are two possibilities for Receiver software to
be upgraded: automatic and manual.
i
CONFIGURATION
Audio Language
Subtitle
Favourite Mode
EPG Preference
Receiver Upgrade
Parental SettingsEnglish
Off
Off
Now&Next
V. 1 . 5
Exit
More
Automatic Download
Search for New Version    Enabled
MENU
Automatic Download (Automatic upgrade)
Automatic Download can be enabled or disabled
by pressing 
_ / ` button. If it is enabled, then there are
two ways for automatic upgrade. The first one is
checking the existence of a new software every time
the IDTV goes to standby. The second one is waking
up at 03:00 a.m. every night, provided that the IDTV is
left in standby mode. Both automatic upgrade meth-
ods result in standby mode either upgraded or not.
If the automatic upgrade is set to “Disabled” then this
function will not work.
Search For New Version (Manual upgrade)
Manual upgrade starts if the “Search for New Ver-
sion” item is highlighted by using 
a / b button and
activated via pressing the OKbutton.
After “Search for New Version” is activated, the
IDTV tunes to each frequency that have been stored
in its database and looks for the new software.
Software Upgrade
          Searching for upgrade. Please wait, or
                       press MENU to cancel.
        Search Progress:
Parental Settings
Some channels broadcast material which you do not
want younger members of the family to watch. Any
channel can be ‘locked’ so that it cannot be selected
for viewing without first a four-digit PIN code being
entered. In this way any channel not suitable for
younger viewers can be protected.
This function enables or disables the menu protection
system and allows the PIN code to be changed.
Use 
a / b button  to go to Parental Settings option.
Press the OK button to enter Parental Settings Menu.
A box asking for the lock key is displayed.
Enter Lock Key
There is only one key which is set to “0000” initially.
Enter lock key. If wrong Lock key is entered, the fol-
lowing message is displayed on the screen and it is
returned back.
Wrong Lock Key
If it is correct, the Parental Settings Menu including
following items is displayed:
Menu Lock              Installation
Set Lock Key
There you can set/reset locking for the Main Menu, or
the Installation Menu to restrict access. If the menu
lock is disabled, there will be free access to the menu
system. Also in this menu you can change the lock
key and set/change parental lock mode.
Disabled: All menus are unlocked.
Main Menu: Main menu is accessible only with the
correct lock key. So the user cannot add, delete, re-
name, move channels, cannot set timers.
Installation: Installation menu is locked, so the user
cannot add channels.
Changes will be updated after exiting Configuration
Menu.
Timers
You can set a timer to switch the TV to any channel
without your intervention. This is also for making video
recordings of programmes when you are out.
Display the Main Menu by pressing the 
 button.
Highlight the Timers line by pressing 
a / b button
and press the OKbutton to display the Timer menu.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
 
						

							
- 19 -
Up to five separate timer events can be set and each
is displayed in the Timer screen, showing the event
number, the channel to be selected, the start time, end
time, date and the mode - whether that event is active
(and will be acted on) or not.
SELECTiMENU
TIMER MENUNo  Channel Name           Start     End     Date                  Mode
1.    ITV 1                          20:00   21:00  12/05/2005         Active
2.    BBC ONE                  00:00   00:00   01/01/2005        Inactive
3.    BBC ONE                  00:00   00:00   01/01/2005        Inactive
4.    BBC ONE                  00:00   00:00   01/01/2005        Inactive
5.    BBC ONE                  00:00   00:00   01/01/2005        Inactive
6.    BBC ONE                  00:00   00:00   01/01/2005        Inactive
Toggle Mode ExitEdit Timer More
• To set an event, highlight its mode button using the
a / b button and press the 
OK button to display
the timer entry window.
Name:
Start:
End:
Date:
Mode:3. ITV 1
00:00
00:00
03/06/2005
Once
• Here the five settings of channel name, start time, end time, date and frequency mode can be set. You
can move freely between each setting using the 
a/ b buttons.
• The channel name is set using the 
_ / ` button to
display the channel which broadcasts the
programme.
• The start time, end time and date are each set with the digit buttons on the remote control in 24-hour
format.
 • The frequency mode determines how often the receiver operates this event and is set with the 
_ /
` button to be either  Once, Daily , or Weekly .
If an invalid number for the start or end times or the
date is entered, “Entered time is not valid” message
appears on the menu.
If timer action occurs while the TV is watched, the TV
switches to the selected channel. When timer ex-
pires, the TV switches to the channel which it is
switched from.
Selected digital channel will be output via Scart-2.
You should connect your VCR to Scart-2 for record-
ing digital broadcast.
Recording From IDTV
Connect your VCR to  AV- 2 via a scart lead.
Set the  AV- 2 O UT  in the feature menu to DDT, as
illustrated and described  on page 26 .
Set the time as described above.
Set your TV to standby using the remote control.
Set your VCR to correspond with the time set on your
TV and select external input (refer to your VCR in-
struction book).
NB. If you switch on your TV whilst the timer record-
ing is active and then switch back to standby, the
timer recording will be cancelled; the timer setting will
be deleted and the desired programme will not be
recorded.
Language
Some programmes are broadcast in two or more lan-
guages simultaneously. The language heard can be
selected from the Language Menu.
• Press the 
 button to display the Main Menu and
use 
a / b button to highlight the Language line and
press the OKbutton.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
• Use the a / b button to highlight the soundtrack
language required and press the  OK button. Normal
viewing, with the required language soundtrack, can
be resumed by pressing the 
 button.
Languages
English