Hitachi Ed-X12 Projector Users Manual

41
Item Description
AUTO OFF
automatically turn the projector off.
Long (max. 99 minutes) 
Ù Short (min. 0 minute = DISABLE)
AUTO OFF
ENABLE
1AUTO OFF
DISABLE
0
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projectors buttons or the remote control buttons 
is pressed or one of the commands (except get...

42
Item Description
SERVICESelecting this item displays the SERVICE menu.

the ENTER button on the remote control to execute the item.
FAN SPEED
Ù AUTO ADJUST 
Ù GHOST
Ù FILTER MESSAGE 
Ù KEY LOCK 
FACTORY RESET 
Ù INFORMATION 
Ù REMOTE FREQ.
FAN SPEED
J
fans. The HIGH is the mode for use at highlands etc. Note that the 
projector is noisier when the HIGH is selected.
HIGH
Ù NORMAL
AUTO ADJUST

When DISABLE is selected, the automatic adjustment feature is 
disabled, although rough adjustment is...

43
Item Description
SERVICEREMOTE FREQ.

setting (
	16).
1:NORMAL 
Ù2:HIGH
Items with a checkmark are on. The factory default setting is for 
both 1:NORMAL and 2:HIGH to be on. If the remote control does 
not function correctly set the this to either only 1 or only 2 as 
described in Remote Control Settings (
	16).
Neither can be turned off at the same time.
INFORMATION
Selecting this item displays a dialog titled “INPUT INFORMATION”. 
It shows the information about the current input.
INPUT-INFORMATION...

44
Item Description
SECURITYThis projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
8VHWKH
x
zEXWWRQVRQWKH237,21
PHQXWRVHOHFW6(&85,7

45
Item Description
SECURITY1.3 If you have forgotten your PASSWORD
1.3-1 Follow the procedure in 1.1-1 to display the 
ENTER PASSWORD BOX.
1.3-2 While the ENTER PASSWORD BOX is 
displayed, press and hold the RESET button 
on the remote control for about 3 seconds or 
SUHVVDQGKROGWKH,1387DQG
yEXWWRQVRQ
the projector for about 3 seconds.
The 10 digit Inquiring Code will be displayed. 
NOTE: If there is no key input for about 55 seconds 
while the Inquiring Code is displayed the menu will 
close....

46
Item Description
SECURITY
2.2-4 Move the cursor to the right side of the CHECK 
3$66:25%2;DQGSUHVVWKH
yEXWWRQWR
display the PASSWORD for about 20 seconds, 
please make note of the PASSWORD during 
this time. After the PASSWORD has displayed 
for about 20 seconds the screen will return to 
the MyScreen PASSWORD on/off menu.
Pressing the ENTER button on the remote control 
or INPUT button on the projector will close the 
PASSWORD box.
When a PASSWORD is set for MyScreen:
The MyScreen...

47
Item Description
SECURITY
,QSXWDSDUW3,1&RGHXVLQJWKH
x
z
{
y
/RGB and INPUT buttons.
A CONFIRMATION BOX will appear. Reenter the 
same PIN Code. This will complete the PIN Code 
registration.
NOTE: If there is no key input for about 55 seconds 
while the PIN BOX or the CONFIRMATION BOX are 
displayed the menu will close. If necessary repeat 
the process from 3.1-1.
Afterwards, anytime the projector is restarted after 
the power switch is turned off the PIN BOX will be 
displayed....

48
Item Description
SECURITY
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to 
supply to the projector, it might react as below.

projector has been moved or re-installed.

has been changed.

Detector function is ON.
4.1 Turning On the Transition Detector Function
4.1-18VHWKH
x
zEXWWRQVRQWKH6(&85,7

49
Item Description
SECURITY4.3 Setting the Transition Detector off
4.3-1 Follow the procedure in 4.1-1 to display the Transition Detector on/off 
menu.
4.3-2 Select TURN OFF to display the ENTER PASSWORD BOX (large). 
Enter the registered PASSWORD and the screen will return to the 
Transition Detector on/off menu.
 If an incorrect PASSWORD is input the menu will close. If necessary repeat 
the process from 4.3-1.
4.4 If you have forgotten your PASSWORD
4.4-1 Follow the procedure in 4.1-1 to display the...

50
Maintenance
Maintenance
Lamp
 WARNINGHIGH VOLTAGEHIGH TEMPERATUREHIGH PRESSURE

yThe projector uses a high-pressure mercury glass lamp. The lamp can break
with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn 
over time. Note that each lamp has a different lifetime, and some may burst or 
burn out soon after you start using them. In addition, when the bulb bursts, it is 
possible for shards of glass WR