Hitachi Cp-X608 Projector Users Manual

5

ItemDescription
SECURITY(continued)
3.1-3   Input a 4 part PIN Code using the ▲/▼/◄/►/RGB and INPUT buttons.A CONFIRMATION BOX will appear. Reenter the same PIN Code. This will complete the PIN Code registration.• If there is no key input for about 55 seconds while the PIN BOX or the CONFIRMATION BOX are displayed the menu will close. If necessary repeat the process from 3.-.Afterwards, anytime the projector is restarted after the power switch is turned off the PIN BOX will be...

5

ItemDescription
SECURITY(continued)
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.• Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.• Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.• Keystone adjustment feature has been prohibited as long as the Transition Detector...

53

ItemDescription
SECURITY(continued)
4.3 Setting the Transition Detector off
4.3-  Follow the procedure in 4.- to display the Transition Detector on/off menu.
4.3-  Select TURN OFF to display the ENTER PASSWORD BOX (large). Enter the registered PASSWORD and the screen will return to the Transition Detector on/off menu.If an incorrect PASSWORD is input the menu will close. If necessary repeat the process from 4.3-.
4.4 If you have forgotten your PASSWORD
4.4-  Follow the...

54

(continued on next page)
ItemDescription
LIVE MODE
Selecting this item sets the projector onto the “Live Mode”. On the “Live Mode”, the projector displays the images from the PC \
via Network, supported by “MIU Live Viewer”. ( 1.1 Live Mode of the User’s Manual - Network Functions)
PC-LESSPRESENTATION
Selecting this item displays the PC-LESS PRESENTATION menu.Using the menu is able to make the projector display the images stored in SD card or USB memory, and realizes a presentation without PC. (...

55

(continued on next page)
ItemOperation
e-SHOT 
Selecting this item displays the e-SHOT menu.
Use the ▲/▼ buttons to select an item which is a still image by the e-SHOT ( 4.7 e-SHOT (Still Image Transfer) Display of the User’s Manual - Network Functions) and the ► or ENTER button to display the image.
• Insert the SD memory card or USB memory into the projector before you use the e-SHOT function. (12)• The item without image stored cannot be selected.• The image names are each displayed in 6...

56

ItemDescription
SETUP(continued)
IP ADDRESS
Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to TURN OFF.
• The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network.
SUBNET MASK
Use the ▲/▼/◄/► buttons to enter the same SUBNET MASK used by your PC. This function can only be used when DHCP is set to TURN OFF.
DEFAULT GATEWAY
Use the ▲/▼/◄/► buttons to enter the...

57

ItemDescription
SETUP(continued)
MODEUse the ▲/▼ buttons to select the mode of the network communication system. Select it according to the setting of your PC.
ADHOC ó INFRASTRUCTURE
CHUse the ▲/▼ buttons to select the channel of the wireless LAN while using it. Select it according to the setting of your PC.The channels  to  are available.• The available channels would be various depending on a country. In addition, wireless LAN card might be required due to the standard....

58
MIU Menu
ItemDescription
INFORMATION
Selecting this item displays the MIU-INFORMATION dialog for confirming the network setting.
• Only the first 6 characters of the projector name are displayed.• Only the first 3 characters of the SSID are displayed.• When the voltage level of the battery for the built in clock decrea\
ses, the set time may become incorrect even though accurate date and time are input. Replace the battery suitably. (63)• MAC wireless will not be displayed when the NETWORK...

59
Maintenance
Lamp
A lamp has finite product life. Using the lamp for long periods of time could cause 
the pictures darker or the color tone poor. Note that each lamp has a different 
lifetime, and some may burst or burn out soon after you start using them\
. 
Preparation of a new lamp and early replacement are recommended. To prepare 
a new lamp, contact your dealer and tell the lamp type number.
Type number = DT00771
Replacing the lamp
. Turn the projector off, and unplug the power cord. 
Allow...

60

Maintenance
Lamp (continued)
Lamp warning
 HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
WARNING  ►The projector uses a high-pressure mercury glass lamp. The 
lamp can break with a loud bang, or burn out, if jolted or scratched, handled 
while hot, or worn over time. Note that each lamp has a different lifetime, and 
some may burst or burn out soon after you start using them. In addition, when 
the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and 
for gas containing...