Hitachi Cp-X385w Liquid Crystal Projector Users Manual

ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
NORSK
PORTGÊS
¤ ¤

REGULATORY
NOTICES
USERS MANUALVol.1 BasicPlease read this users manual thoroughly to ensure correct usage through understanding.
BEDIENUNGSANLEITUNG Teil 1 GrundlagenBitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.
MANUEL DUTILISATION Vol.1 FondementsNous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de
lappareil.
MANUALE DISTRUZIONI Vol.1...

1
LCD Projector CP-X385W
USERS MANUAL   USERS MANUAL  Vol.1 (Basic)
Page
PROJECTOR FEATURES ................2
PREPARATIONS ..............................2
PART NAMES ...................................4
SETTING UP
THE PROJECTOR ............................6
CONNECTING
YOUR DEVICES................................8
USING THE REMOTE
CONTROL .......................................13
TURNING ON THE POWER ...........14
TURNING OFF THE POWER .........16
ADJUSTING THE VOLUME ...........17
TEMPORARILY MUTING
THE...

2
Ultra High BrightnessCrisp, ultra-bright presentations is achieved
by using a UHB (ultra high brightness) lamp
and a highly efficient optical system
Partial Magnification FunctionInteresting parts of images can be magnified
for closer viewing 
Keystone Distortion CorrectionQuick correction of distorted images electrically
Whisper Mode EquippedSpecial mode is available for reducing
projector noise to achieve quieter operation
PREPARATIONSYour projector should come with the items
shown below. Check...

3
1Connect your devices to the projector
Connect your computer, VCR and/or other
devices you will be using to the projector.
Insert the batteries into the remote
control2
3Connect the power cord
(1) Connect the connector of the electrical power cord to the AC inlet of the main unit.
(2) Firmly plug the power cords plug into the outlet
WARNINGPrecautions to observe in regards to the power cord:Please use extra
caution when connecting the projectors power cord as incorrect or faulty
connections may...

4
PART NAMESTHE PROJECTOR
Indicates the corresponding
reference page
Power Switch
AC Inlet
(to the Power Cord)
Ventilation Openings
(Intake)Zoom Ring
Focus Ring
Remote Control
Sensor
Lens
Lens Cap
Speaker
Handle Hook
STANDBY/ON Button
KEYSTONE Button
Foot Adjuster Button
Filter Cover
Rear Foot Adjuster
INPUT Button
LAMP Indicator
TEMP Indicator
POWER Indicator
RESET Button
MENU Button
Ventilation Openings
(exhaust)
TERMINAL PANEL
S-VIDEO Port
COMPONENT VIDEO
Y Port
C
B/PBPort
C
R/PRPort
VIDEO IN Port...

5
THE REMOTE CONTROL
RGB buttonVIDEO button
KEYSTONE button
ENTER button
RESET button
BLANK button
LASER button
MOUSE / RIGHT
Button
Disk Pad
MENU button
AUTO button
,,,
Cursor buttons
POSITION button
ASPECT button
MAGNIFY button
ESC button
FREEZE button
MUTE button
VOLUME button
SEARCH button
STANDBY/ONLASERBLANK
RGBVIDEO
AUTO
MENU
ENTER
KEYSTONE
RESET
FREEZE ASPECT
ESC
MAGNIFY
POSITION
OFF ON
VOLUME
SEARCH
MUTE
STANDBY/ON
button
• Keep the remote control...

6
Angle Adjustment
1Lift up the front side of the
projector, and pressing the foot
adjuster button, adjust the
projection angle.
2Release the button to lock at the desired angle.
3Turn the rear foot adjuster to adjust
the left-right slope. Do not force the
foot adjuster screws. This could
damage the adjusters or cause the
lock to fail.
Use the foot adjusters on the bottom of the projector to adjust the projection
angle. It is variable within 0˚ to 9˚ approximately.
CAUTION• Install the projector in a...

7
Refer to the illustrations and tables below to determine the screen size and
projection distance.
Adjusting the Screen Size and Projection Distance
If 4:3 aspect ratio
4
3
The values shown in the table are calculated for a full size screen
a:Distance from the projector to the screen (±10%)
b:Distance from the lens center to the bottom of the screen (±10%)
c:Distance from the lens center to the top of the screen (±10%)
Top View
Side View
a
Screen size
[inches (m)]a[inches (m)]
Min.Max.
40  (1.0)62...

8
Display monitors
DVD players
VCRs
Laptop computers
Desktop computers
Indicates the
corresponding
reference page
ATTENTIONPrecautions to observe when connecting other devices to the projector
•Whenever attempting to connect other devices to the projector, please thoroughly
read the manual of each device to be connected.
•TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to
connect a live device to the projector may generate extremely loud noises or other
abnormalities...

9
Ports and Cables
Refer to the table below to find out which projector port and cable to use for connecting a
given device. Use this table for determining which cables to prepare.
About Plug-and-Play Capability
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible. Please take advantage of this function by connecting the accessory RGB
cable to the RGB IN 1 port (DDC 1/2B compatible)....