Hitachi Cp-X268a Projector Users Manual
Here you can view all the pages of manual Hitachi Cp-X268a Projector Users Manual. The Hitachi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
Setting up
Using the Security Bar
WARNING ►Do not use the security bar to prevent the projector from
falling. Dropping or knocking over the projector may cause damage or inj\
ury.
A commercial anti-theft chain or wire can be attached to the security bar\
on the
projector.
. How to attach
An anti-theft chain or wire can be
attached as shown in the illustration.
(Anti-theft chains or wires of up to
0mm in diameter can be used)
Anti-theft chain or wire[sold separately]...](http://img.usermanuals.tech/thumb/33/91007/w300_hitachi-cp-x268a-manual_d-10.png "Page 11
Setting up
Using the Security Bar
WARNING ►Do not use the security bar to prevent the projector from
falling. Dropping or knocking over the projector may cause damage or inj\
ury.
A commercial anti-theft chain or wire can be attached to the security bar\
on the
projector.
. How to attach
An anti-theft chain or wire can be
attached as shown in the illustration.
(Anti-theft chains or wires of up to
0mm in diameter can be used)
Anti-theft chain or wire[sold separately]...")
Setting up Using the Security Bar WARNING ►Do not use the security bar to prevent the projector from falling. Dropping or knocking over the projector may cause damage or inj\ ury. A commercial anti-theft chain or wire can be attached to the security bar\ on the projector. . How to attach An anti-theft chain or wire can be attached as shown in the illustration. (Anti-theft chains or wires of up to 0mm in diameter can be used) Anti-theft chain or wire[sold separately]...
Page 12
![Page 12
Setting up
Connecting your devices
NOTE • Whenever attempting to connect a laptop computer to the projector, be sure
to activate the laptop’s RGB external image output (set the laptop to CRT display or to
simultaneous LCD and CRT display). For details on how this is done, please refer to the
instruction manual of the corresponding laptop computer.
• Secure the screws on the connectors and tighten.
• Some computers may have multiple display screen modes. Use of some of th\
ese
modes will...](http://img.usermanuals.tech/thumb/33/91007/w300_hitachi-cp-x268a-manual_d-11.png "Page 12
Setting up
Connecting your devices
NOTE • Whenever attempting to connect a laptop computer to the projector, be sure
to activate the laptop’s RGB external image output (set the laptop to CRT display or to
simultaneous LCD and CRT display). For details on how this is done, please refer to the
instruction manual of the corresponding laptop computer.
• Secure the screws on the connectors and tighten.
• Some computers may have multiple display screen modes. Use of some of th\
ese
modes will...")
Setting up Connecting your devices NOTE • Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop’s RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer. • Secure the screws on the connectors and tighten. • Some computers may have multiple display screen modes. Use of some of th\ ese modes will...
Page 13
3 LAN Y R L AUDIO IN3 AUDIO IN1AUDIO OUT USB RGB OUT AUDIO IN2 VIDEOS-VIDEO CB/PB CR/PRCONTROL RGB IN2RGB IN1 K AUX I/OSD CARD Setting up Examples of connection with a computer * In the default setting, the AUDIO IN port is the audio port for the RGB IN, and the AUDIO IN port is the audio port for the RGB IN ports. To change the settings, refer to the AUDIO item in the SETUP menu. (38) LAN Y R L AUDIO IN3 AUDIO IN1AUDIO OUT USB RGB OUT AUDIO IN2 VIDEOS-VIDEO CB/PB...
Page 14
4 Y R L AUDIO IN3 AUDIO IN1AUDIO OUT USB RGB OUT AUDIO IN2 VIDEOS-VIDEO CB/PB CR/PRCONTROL RGB IN2RGB IN1 K Y R L AUDIO IN3 AUDIO IN1AUDIO OUT USB RGB OUT AUDIO IN2 VIDEOS-VIDEO CB/PB CR/PRCONTROL RGB IN2RGB IN1 K Y R L AUDIO IN3 AUDIO IN1AUDIO OUT USB RGB OUT AUDIO IN2 VIDEOS-VIDEO CB/PB CR/PRCONTROL RGB IN2RGB IN1 K Setting up Examples of connection with a VCR/DVD player Audio (R) out Video out Audio cable Audio/Video cable Audio (R) out S-Video outS-Video cable Audio (R) out Component...
Page 15
![Page 15
5
Connecting power supply
WARNING ►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the powe\
r cord's
specified voltage range.
• Never modify the power cord. Never attempt to defeat the ground con\
nection
of the...](http://img.usermanuals.tech/thumb/33/91007/w300_hitachi-cp-x268a-manual_d-14.png "Page 15
5
Connecting power supply
WARNING ►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the powe\
r cord's
specified voltage range.
• Never modify the power cord. Never attempt to defeat the ground con\
nection
of the...")
5 Connecting power supply WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug the power cord into an outlet rated for use with the powe\ r cord's specified voltage range. • Never modify the power cord. Never attempt to defeat the ground con\ nection of the...
Page 16
![Page 16
6
When using the projector with a wireless LAN please insert the included \
Wireless
Network Card.
When using a commercial SD Memory card in order to view images insert th\
e SD
Memory card in the same manner.
And when using a commercial USB MEMORY in order to view images insert the
USB MEMORY to the AUX I/O port. (13)
See User's Manual - Network Function for information on using either type of card.
. Make sure the projector’s power switch is OFF.
. Remove the SD card slot...](http://img.usermanuals.tech/thumb/33/91007/w300_hitachi-cp-x268a-manual_d-15.png "Page 16
6
When using the projector with a wireless LAN please insert the included \
Wireless
Network Card.
When using a commercial SD Memory card in order to view images insert th\
e SD
Memory card in the same manner.
And when using a commercial USB MEMORY in order to view images insert the
USB MEMORY to the AUX I/O port. (13)
See User's Manual - Network Function for information on using either type of card.
. Make sure the projector’s power switch is OFF.
. Remove the SD card slot...")
6 When using the projector with a wireless LAN please insert the included \ Wireless Network Card. When using a commercial SD Memory card in order to view images insert th\ e SD Memory card in the same manner. And when using a commercial USB MEMORY in order to view images insert the USB MEMORY to the AUX I/O port. (13) See User's Manual - Network Function for information on using either type of card. . Make sure the projector’s power switch is OFF. . Remove the SD card slot...
Page 17
![Page 17
7
Putting batteries
WARNING ►Always handle the batteries with care and use them only as
directed. Battery may explode if mistreated. Do not recharge, disassembl\
e or
dispose of in fire.
And also improper use may result in cracking or leakage, which could res\
ult in
fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
• Make sure the plus...](http://img.usermanuals.tech/thumb/33/91007/w300_hitachi-cp-x268a-manual_d-16.png "Page 17
7
Putting batteries
WARNING ►Always handle the batteries with care and use them only as
directed. Battery may explode if mistreated. Do not recharge, disassembl\
e or
dispose of in fire.
And also improper use may result in cracking or leakage, which could res\
ult in
fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
• Make sure the plus...")
7 Putting batteries WARNING ►Always handle the batteries with care and use them only as directed. Battery may explode if mistreated. Do not recharge, disassembl\ e or dispose of in fire. And also improper use may result in cracking or leakage, which could res\ ult in fire, injury and/or pollution of the surrounding environment. • Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one. • Make sure the plus...
Page 18
![Page 18
8
Using the remote control
CAUTION ►Be careful in handling the remote control.
• Do not drop or expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. It ma\
y result in
malfunction.
• Remove the batteries from the remote control and store them in a safe place if
you won’t be using the remote control for an extended period.
• Replace the batteries whenever the remote control starts malfunctio\
ning.
• When strong lights (such as direct...](http://img.usermanuals.tech/thumb/33/91007/w300_hitachi-cp-x268a-manual_d-17.png "Page 18
8
Using the remote control
CAUTION ►Be careful in handling the remote control.
• Do not drop or expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. It ma\
y result in
malfunction.
• Remove the batteries from the remote control and store them in a safe place if
you won’t be using the remote control for an extended period.
• Replace the batteries whenever the remote control starts malfunctio\
ning.
• When strong lights (such as direct...")
8 Using the remote control CAUTION ►Be careful in handling the remote control. • Do not drop or expose the remote control to physical impact. • Do not get the remote control wet or place it on wet objects. It ma\ y result in malfunction. • Remove the batteries from the remote control and store them in a safe place if you won’t be using the remote control for an extended period. • Replace the batteries whenever the remote control starts malfunctio\ ning. • When strong lights (such as direct...
Page 19
9 Power on/off Power on/off WARNING ►When the power is on, a strong light is emitted. Do not look into the lens of projector. Also do not peep at the inside of projector through a hole. Turning on the power . Make sure that the power cord is firmly and correctly connected to the projector and the outlet. . Remove the lens cover, and set the power switch to the ON position. The power indicator will light up in steady orange. Then wait several seconds because the buttons may not function...
Page 20
0 Operating Operating Adjusting the volume . Press the VOLUME button on the remote control. A dialog will appear on the screen to aid you in adjusting the volume. . Use the cursor buttons ▲/▼ to adjust the volume. To close the dialog and complete the operation, press the VOLUME button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds. Temporarily muting the sound . Press the MUTE button on the remote control. A dialog will appear...