Hitachi Cp-X2510n Projector Users Manual

							41
SCREEN menu
ItemDescription
SOURCE NAME Each input port for this projector can have a name applied to it.
(1)  
Use the ▲/▼ buttons on the SCREEN menu to select SOURCE 
NAME and press the ► or ENTER button.  
The SOURCE NAME menu will be displayed.
(2)   Use the ▲/▼ buttons on the SOURCE 
NAME menu to select the port to be 
named and press the ► button. Right 
side of the menu is blank until a name is 
specified.  
The SOURCE NAME dialog will be 
displayed.
(3)   The current name will be displayed on 
the first line. Use the ▲/▼/◄/► buttons 
and the ENTER or INPUT button to 
select and enter characters. To erase 1 
character at one time, press the RESET 
button or press the ◄ and INPUT button 
at the same time. Also if you move the 
cursor to DELETE or ALL CLEAR on 
screen and press the  ENTER or INPUT 
button, 1 character or all characters will 
be erased. The name can be a maximum 
of 16 characters.
(4)   To change an already inserted character, 
press the ▲ button to move the cursor to 
the first line, and use the ◄/► buttons to 
move the cursor on the character to be 
changed. 
After pressing the ENTER or INPUT button, the character is 
selected.  Then, follow the same procedure as described at the 
item (3) above.
(5)   To finish entering text, move the cursor to the OK on screen and 
press the ►,  ENTER or INPUT button. To revert to the previous 
name without saving changes, move the cursor to the CANCEL 
on screen and press the ◄, ENTER or INPUT button.
TEMPLATE Using the ▲/▼ buttons switches the mode for the template screen. 
Press the ► button to display the selected template, and press the 
◄ button to close the displayed screen.
The last selected template is displayed when the
 MY BUTTON 
allocated to the TEMPLATE function is pressed (
 45).
    
 TEST PATTERN  ó DOT-LINE1
DOT-LINE4 
ó DOT-LINE3 
ó DOT-LINE2
(continued on next page) 
						

							42
SCREEN menu
ItemDescription
C.C.
(Closed Caption) The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select Closed Caption DISPLAY setting from following options using 
▲/▼ buttons.
AUTO  ó ON 
ó OFF 
   
AUTO :   Closed Caption automatically displays when the volume 
is muted.
ON : Closed Caption is on
OFF  : Closed Caption is off
• The caption is not displayed when the OSD menu is active.
• The Closed Caption is the function to display the dialogue, 
narration, and / or sound effects of a television program or other 
video sources. The Closed Caption availability is depending upon 
broadcaster and/or content.
MODE
Select Closed Caption MODE setting from following options using 
▲/▼ buttons. CAPTIONS  ó TEXT
CAPTIONS : Display Closed Caption
TEXT  :  Display Text data, which is for additional information such 
as news reports or a TV program guide. The information 
covers the entire screen. Not all of the C.C. program has 
Text information.
CHANNEL
Select Closed Caption CHANNEL from following options using ▲/▼ 
buttons.
1 ó  2 
ó 3 
ó 4
1: Channel 1, primary channel / language
2: Channel 2
3: Channel 3
4: Channel 4
The channel data may vary, depending on the content. Some 
channel might be used for secondary language or empty. 
						

							43
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item, except for the items LAMP TIME 
and FILTER TIME. Then perform it according to the 
following table
ItemDescription
AUTO SEARCH Using the ▲/▼ buttons turns on/off the automatic signal search 
function.
ON  ó OFF
When the ON is selected, detecting no signal automatically cycles 
through input ports in the following order. The search is started from 
the current port. Then when an input is found, the projector will stop 
searching and display the image.      COMPUTER IN1   ð  COMPUTER IN2 
VIDEO   S-VIDEO 
 
COMPONENT
 (Y, Cb/Cr, Cr/Pr)
AUTO 
KEYSTONE
Using the ▲/▼ buttons turns on/off the automatic keystone function.
ON  ó OFF
ON :   
Automatic keystone distortion correction will be executed 
whenever changing the slant of the projector.
OFF  :   This function is disabled. Please execute the AUTO 
KEYSTONE EXECUTE in the SETUP menu for automatic 
keystone distortion correction.
• When the projector is suspended from the ceiling this feature will 
not function properly so select the OFF.
• This function will be unavailable when the Transition Detector is on 
( 59).
DIRECT ON Using the ▲/▼ buttons turns on/off the DIRECT ON function.
ON  ó OFF
When set to the ON, the lamp in projector will be automatically 
turned on without the usual procedure  (
15), only when the 
projector is supplied with the power after the power was cut while 
the lamp was on.
• This function does not work as long as the power has been 
supplied to the projector while the lamp is off.
• 
After turning the lamp on by the DIRECT ON function, if neither 
input nor operation is detected for about 30 minutes, the projector is 
turned off, even though the AUTO OFF function (
 44) is disabled.
(continued on next page) 
						

							44
OPTION menu
ItemDescription
AUTO OFF Using the ▲/▼ buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes)  ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projector's buttons or the remote control buttons 
is pressed or one of the commands (except get commands) is 
transmitted to the CONTROL port during the corresponding time, 
projector will not be turned off.
Please refer to the section “Turning off the power”
 ( 15).
LAMP TIME The lamp time is the usage time of the lamp, counted after the last 
resetting. It is shown in the OPTION menu.
Pressing the RESET button on the remote control or the ► button 
of the projector displays a dialog. 
To reset the lamp time, select the OK using the ► button.
CANCEL
 ð  OK
• Please reset the lamp time only when you have replaced the lamp, 
for a suitable indication about the lamp.
• For the lamp replacement, see the section "Replacing the lamp"  
(
 62, 63).
FILTER TIME The filter time is the usage time of the air filter, counted after the last 
resetting. It is shown in the OPTION menu.
Pressing the RESET button on the remote control or the ► button 
of the projector displays a dialog. 
To reset the filter time, select the OK using the ► button.
CANCEL
 ð  OK
• 
Please reset the filter time only when you have cleaned or replaced 
the air filter, for a suitable indication about the air filter.
• For the air filter cleaning, see the section “Cleaning and replacing 
the air filter” (
 64, 65).
(continued on next page) 
						

							45
OPTION menu
ItemDescription
MY BUTTON This item is to assign one of the following functions to 
MY BUTTON 
1/2 on the remote control (
 6).
(1)   Use the ▲/▼ buttons on the MY BUTTON menu to select a 
MY BUTTON - (1/2) and press the ► button to display the MY 
BUTTON setup dialog. 
(2)   Then using the ▲/▼/◄/► buttons sets one of the following 
functions to the chosen button. Press the ENTER or INPUT 
button to save the setting.
• COMPUTER IN1: Sets port to  COMPUTER IN1.
• COMPUTER IN2: Sets port to  COMPUTER IN2.
• COMPONENT: Sets port to  COMPONENT (Y, Cb/Pb, Cr/Pr) .
• S-VIDEO: Sets port to  S-VIDEO.
• VIDEO: Sets port to  VIDEO.
•   INFORMATION: Displays SYSTEM_INFORMATION,  
INPUT_INFORMATION  (
50), NETWORK_INFORMATION 
( 55) or nothing.
•    AUTO KEYSTONE : Performs automatic keystone distortion 
correction (
 35).
•   MY MEMORY: Loads one of adjustment data stored  (29). 
When more than one data are saved, the adjustment   
changes every time the  MY BUTTON is pressed.
When no data is saved in memory, the 
dialog "No saved data" appears.
When the current adjustment is not 
saved to memory, the dialog as shown in 
the right appears.
If you want to keep the current adjustment, please press   
the ► button to exit. Otherwise loading a data will overwrite the 
current adjusted condition.
•    ACTIVE IRIS: Changes the active iris mode. 
(This item is available only for  CP-X2510N or CP-X3010N .)
• PICTURE MODE: Changes the PICTURE MODE (
 25).
•  FILTER RESET: Displays the filter time reset confirmation dialogue  ( 44)
.
•    TEMPLATE: Makes the template pattern selected to the 
TEMPLATE item (
 41) appear or disappear.
•    AV MUTE: Turns the picture and audio on/off.
•   MY IMAGE: Displays the MY IMAGE menu (
 54).
•   MESSENGER: Turns the messenger text displayed on the screen on/off (Messenger Function of the User's Manual - Network Guide). 
When there is no transferred text data to display, the message 
”NO MESSENGER DATA" appears.
MY SOURCE
Using ▲/▼ buttons selects the picture input port to be selected with 
pressing the  MY SOURCE/DOC.CAMERA  button on the remote 
control.
Select the picture input that is connected with a document camera.
    COMPUTER IN1  ó COMPUTER IN2 
    VIDEO  ó S-VIDEO 
ó COMPONENT
(continued on next page) 
						

							46
OPTION menu
ItemDescription
SERVICE Selecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the ENTER 
button on the remote control to execute 
the item.
FAN SPEED
Using the ▲/▼ buttons switches the rotation speed of the cooling 
fans. The HIGH is the mode for use at highlands etc. Note that the 
projector is noisier when the HIGH is selected.
HIGH  ó NORMAL
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. When the 
DISABLE is selected, the automatic adjustment feature is disabled.
FINE  ó FAST 
ó DISABLE
   
FINE: Finer tuning including H.SIZE adjustment.
FAST :  Faster tuning, setting H.SIZE to prearranged data for the 
input signal.
• 
Depending on conditions, such as input image, signal cable to the 
projector, environment around the projector, etc., the automatic adjustment 
may not work correctly.  In such a case, please choose DISABLE to 
disable the automatic adjustment, and make adjustment manually
.
GHOST
1.   Select a color element of ghost using 
the ◄/► buttons. 
2.    Adjust the selected element using the 
▲/▼ buttons to disappear ghost.
FILTER MESSAGE
Use the ▲/▼ button to set the timer for notifying by the message 
when to replace the filter unit  100h  ó 200h 
ó 500h 
ó 1000h 
ó 2000h 
ó 5000h 
ó OFF
After choosing an item except OFF, the message “REMINDER *** 
HRS PASSED ....” will appear after the timer reaches the interval 
time set by this feature (
 68). 
When the OFF is chosen, the message will not appear. Utilize this 
feature to keep the air filter clean, setting the suitable time according 
to your environment of this projector.
• Please take care of the filter unit periodically, even if there is 
no message. If the air filter becomes to be blocked by dust or 
other matter, the internal temperature will rise, which could cause 
malfunction, or reduce the lifetime of the projector.
• Please be careful with the operating environment of the projector 
and the condition of the filter unit.
(continued on next page) 
						

							47
OPTION menu
ItemDescription
SERVICE
(continued) KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When ON 
is selected, the buttons on the projector except the  STANDBY/ON 
button are locked.
ON  ó OFF
• Please use this function to prevent tampering or accidental 
operation. This function does not have any effect on the remote 
control.
REMOTE FREQ.
(1)   Use the ▲/▼ button to change the projector's remote sensor 
frequency setting  (
4).
1:NORMAL  ó 2:HIGH
(2)   Use the ◄/► button to change the 
projector's remote sensor on or off.
ON  ó OFF
The factory default setting is for both 1:NORMAL and 2:HIGH to be 
on. If the remote control does not function correctly, disable either of 
them (
 14).
It's not possible to disable both options at the same time.
COMMUNICATION
Selecting this item displays COMMUNICATION 
menu. 
In this menu, you can configure the serial 
communication settings of the projector using the 
CONTROL port.
• Select an item using the cursor buttons ▲/▼. 
Then pressing the ► button opens the submenu 
for the setting item you selected. Or, pressing 
the ◄ button instead of the ► button makes the 
menu back to the previous one without changing 
the setup. Each submenu can be operated as 
described above.
• When COMMUNICATION TYPE (
 48) is set to 
OFF, the other items in COMMUNICATION menu 
are invalid. 
• For the function of serial communication, refer to 
the User's Manual - Network Guide .
(continued on next page) 
						

							48
OPTION menu
ItemDescription
SERVICE
(continued)
COMMUNICATION (continued)
COMMUNICATION TYPE
Select the communication type for transmission via 
the CONTROL port.
NETWORK BRIDGE
 ó  OFF
NETWORK BRIDGE: 
Select this type, if it is 
required to control an external device as a network 
terminal, via this projector from the computer. 
The CONTROL port doesn't accept RS-232C 
commands.(
 Controlling the external device 
via the projector (using the NETWORK BRIDGE 
function) of the User’s Manual - Network Guide)
OFF : Select this mode to receive RS-232C 
commands using the  CONTROL port. 
• 
OFF is selected as the default setting. 
• When you select the NETWORK BRIDGE, check 
the item, TRANSMISSTION METHOD  (
below).
SERIAL SETTINGS
Select the serial communication condition for the 
CONTROL port. BAUD RATE 4800bps  ó 9600bps 
ó 19200bps 
ó 38400bps
      
 PARITY
NONE  ó ODD 
ó EVEN
    
• The BAUD RATE is fixed to 19200bps and PARITY 
is fixed NONE when the COMMUNICATION TYPE 
is set to OFF
 ( above).
TRANSMISSION METHOD
Select the transmission method for communication by 
the NETWORK BRIDGE from the CONTROL port.
HALF-DUPLEX 
ó FULL-DUPLEX
HALF-DUPLEX : This method lets the projector 
make two way communication, but only one 
direction, either transmitting or receiving data, is 
allowed at a time.
FULL-DUPLEX : This method lets the projector 
make two way communication, transmitting and 
receiving data at the same time.
• HALF-DUPLEX is selected as the default setting.
• When you select HALF-DUPLEX, check the items,  
RESPONSE LIMIT TIME and BYTES INTERVAL 
TIMEOUT (
 49).
(continued on next page) 
						

							49
OPTION menu
ItemDescription
SERVICE
(continued)
COMMUNICATION (continued)
RESPONSE LIMIT TIME
Select the time period to wait for receiving 
response data from other device communicating by 
the NETWORK BRIDGE and the HALF-DUPLEX 
through the CONTROL port.
OFF  ó 1s 
ó 2s 
ó 3s
    
OFF : Select this mode if it is not required to check 
the responses from the device that the projector 
sends data to. In this mode, the projector can 
send out data from the computer continuously.
1s /2s /3s: Select the time period to keep the  projector waiting for response from the device 
that the projector sends data to. While waiting the 
response, the projector does not send out any 
data from the CONTROL port.
• This menu is available only when the NETWORK 
BRIDGE is selected for the COMMUNICATION 
TYPE and the HALF-DUPLEX is selected for the 
TRANSMISSION METHOD  (
48).
• OFF is selected as the default setting.
BYTES INTERVAL TIMEOUT
Select the blank time length to judge that the 
response data has finished in the communicating 
in the condition of the NETWORK BRIDGE and 
the HALF-DUPLEX through the  CONTROL port.
50ms
  ó  100ms 
ó  150ms 
ó  200ms 
  
• This menu is available only when NETWORK 
BRIDGE is selected for the COMMUNICATION 
TYPE and HALF-DUPLEX is selected for the 
TRANSMISSION METHOD  (
48).
• 50ms is selected as the default setting.
(continued on next page) 
						

							50
OPTION menu
ItemDescription
SERVICE
(continued) INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”. 
It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock 
function is working. 
• The “SCART RGB” message means the COMPONENT port 
is working as a SCART RGB input port. Please refer to the 
COMPONENT item in INPUT menu (
 32).
• This item can't be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to ON, the MY TEXT is 
displayed together with the input information in the INPUT_
INFORMATION box (
 61).
FACTORY RESET
Selecting OK using the ► button performs this function. By this 
function, all the items in all of menus will collectively return to the 
initial setting. Note that the items LAMP TIME, FILTER TIME, 
LANGUAGE, FILTER MESSAGE, NETWORK and SECURITY 
settings are not reset. CANCEL
 ð  OK