Hitachi Cp-X2011 Projector Users Manual

62
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon Cases not involving a machine defectReference
page
6RXQGGRHVQRW
FRPHRXW
The signal cables are not correctly connected.
&RUUHFWO\FRQQHFWWKHDXGLRFDEOHV9
The MUTE function is working.
5HVWRUHWKHVRXQGSUHVVLQJWKHMUTERUVOLUME +-
EXWWRQRQWKHUHPRWHFRQWURO15
7KHYROXPHLVDGMXVWHGWRDQH[WUHPHO\ORZOHYHO

RUWKHUHPRWHFRQWURO15
The AUDIO SOURCE/SPEAKER setting is not correct....

63
Phenomenon Cases not involving a machine defectReference
page
3LFWXUHVDSSHDU
GDUN
The brightness and/or contrast are adjusted to an 
H[WUHPHO\ORZOHYHO
$GMXVWWKH%5,*+71(66DQGRU&2175$67VHWWLQJVWRD
KLJKHUOHYHOXVLQJWKHPHQXIXQFWLRQ26
The ECO MODE function is working.
6HOHFWWKH1250$/IRUWKH(&202(LWHPLQWKH6(783
PHQX34
The lamp is approaching the end of its product 
lifetime.
5HSODFHWKHODPS
3LFWXUHVDSSHDU
EOXUU\
Either the focus and/or horizontal phase settings are...

64
6SHFL

65
6SHFL

1
ENGLISH
Projector
CP-X2010Z/CP-X2510Z/CP-X3010Z
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely 
and utilize well the product.
WARNINGV
product. See “Using the CD manual” (
	15) to read the manuals in the CD. 
After reading them, store them in a safe place for future reference.
RGXFW

	
)LUVWRIDOO............................................ 2
  Entries and graphical symbols explanation ...... 2...

2
First of  all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and the 
product as follows, for safety purpose. Please know their meanings beforehand, 
and heed them.
Important safety instruction
SURGXFW%HVXUHWR
follow them always when handling the product. The manufacturer assumes no 
responsibility for any damage caused by mishandling that is beyond normal usage 
GH

3
ENGLISH
Regulator y notices
About Electro-Magnetic Interference
In CANADA

In the US, and other places where the FCC regulations are applicable
Declaration of Conformity
Trade name HITACHI
Model Number   CP-X2010Z, CP-X2510Z, CP-X3010Z
Responsible Party Hitachi America, Ltd.
Address 900 Hitachi way, Chula Vista, CA 91914-3556  U.S.A.
Telephone Number +1 -800-225-1741
VVXEMHFW
to the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any...

4
Contents of  package
Your projector should come with the items 
shown below. Check that all the items are 
included. Require of your dealer immediately if 
any items are missing.
(1) Remote control with two AA batteries 
(2) Power cord 
(3) Computer cable
(4) Lens cover
8VHU

5
ENGLISH
Preparations
Loading batteries into the remote control
Please insert the batteries into the remote control before using it. If the remote 
control starts to malfunction, try to replace the batteries. If you will not use the 
remote control for long period, remove the batteries from the remote control and 
store them in a safe place.
1.Holding the hook part of the battery 
cover, remove it.
2.Align and insert the two AA batteries 
(
HITACHI MAXELL, Part No.LR6 or R6P)
according to their plus and...

6
On a horizontal surface Suspended from the ceiling

the projector and other objects such as walls. Do not 
place or attach anything that would block the lens or 
vent holes.


(
	16DQGVHUYLFHPD\EHUHTXLUHG%HIRUHLQVWDOOLQJ
the projector, consult your dealer about your installation.
WARNING

y
XI¿FLHQWYHQWLODWLRQ


y
GOHDYHLQVWDOOLQJ
and removing the projector with the mounting accessories to the service personnel.
VHG
CAUTION
y$YRLGSODFLQJWKHSURMHFWRULQVPRN\KXPLGRUGXVW\SODFH...