Hitachi CP-X1200/CP-X1250 Projector User Manual

STANDBY/ONVIDEOLASER INDICATOR
ESC MENUPOSITIONRESET AUTO
KEYSTONE1  2  3
ID CHANGESEARCH
ON
OFFFREEZE MUTEMAGNFYPinPVOLUME
RGB
BLANK
PREVIOUSNEXT ASPECT ENTER
LASERLENS SHIFT+
–––++FOCUS ZOOM
STANDBY/ONVIDEOLASER INDICATOR
ESC MENUPOSITIONRESET AUTO
KEYSTONE1  2  3
ID CHANGESEARCH
ON
OFFFREEZE MUTEMAGNFYPinPVOLUME
RGB
BLANK
PREVIOUSNEXT ASPECT ENTER
LASERLENS SHIFT+
–––++FOCUS ZOOM
21
Operating (continued) Operating (continued)
Displaying The Child Window 
Press the PinP button.
The child window with a...

STANDBY/ONVIDEOLASER INDICATOR
ESC MENUPOSITIONRESET AUTO
KEYSTONE1  2  3
ID CHANGESEARCH
ON
OFFFREEZE MUTEMAGNFYPinPVOLUME
RGB
BLANK
PREVIOUSNEXT ASPECT ENTER
LASERLENS SHIFT+
–––++FOCUS ZOOM
22
Multifunctional Settings Multifunctional Settings
Using The Menu Functions
This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO,
SCREEN, OPTION and NETWORK. Each of these menus is operated using the same
methods. The basic operations of these menus are as follows.
Press the MENU...

23
Multifunctional Settings (continued) Multifunctional Settings (continued)
MAIN Menu
With the MAIN menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
: SELECT
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORKBRIGHT
CONTRAST
ASPECT
WHISPER
MIRROR
LANGUAGE
[Language]
RESET +0
+0
4:3
NORMAL
NORMAL
ENGLISH
ItemDescription
BRIGHT Adjust the brightness using the  /  buttons. :    Light 
Dark
CONTRASTAdjust the...

24
PICTURE-1 Menu
With the PICTURE-1 menu, the items shown in the table below can
be performed. Perform each operation in accordance with the
instructions in the table below.
: SELECT
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORKGAMMA
COLOR BAL R
COLOR BAL G
COLOR BAL B
SHARPNESS
COLOR
TINT
MY MEMORYNORMAL
+0
+0
+0
+0
+0
+0
LOAD1
Multifunctional Settings (continued) Multifunctional Settings (continued)
ItemDescription
GAMMA
Select a gamma mode using the  /  buttons. :
NORMAL 
CINEMA...

25
Multifunctional Settings (continued) Multifunctional Settings (continued)
ItemDescription
MY MEMORY
Select a command to load or save using the  /  buttons, and then press
the  (or the ENTER) button to perform the function.:
This projector has 4 numbered memories for adjustment data. 
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current adjustment
data on the memory whose number corresponds with the command’s number.
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the
memory whose...

26
Multifunctional Settings (continued) Multifunctional Settings (continued)
PICTURE-2 Menu
With the PICTURE-2 menu, the items shown in the table below can
be performed. Perform each operation in accordance with the
instructions in the table below.
memoThis menu cannot be selected at a M1-D signal.: SELECT
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORKV POSITION
H POSITION
H PHASE
H SIZE
OVER SCAN
RESET20
142
31
1344
95
ItemDescription
V POSITIONAdjust the vertical position using the  /...

27
Multifunctional Settings (continued) Multifunctional Settings (continued)
INPUT Menu
With the INPUT menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
: SELECT
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORKCOLOR SPACE
COMPONENT
VIDEO
3D-YCS
VIDEO NR
P. INP.  INPUT
P. INP.  POSIT.
POWERUP  INPUTAUTOCOMPONENTAUTO
TURN OFF
LOW
VIDEO
 RGB
ItemDescription
COLOR SPACE
Select a color space mode using the  /...

28
Multifunctional Settings (continued) Multifunctional Settings (continued)
INPUT Menu (continued)
ItemDescription
P.IN P. INPUT
Select a signal input port for the child window using the  /  buttons. :
VIDEO 
S-VIDEO
memoAbout the child window, please refer to the section “Displaying the Child
Window”. 
P.IN P. POSIT.
Select the display position of the child window using the  /  buttons. :




memoAbout the child window, please refer to the section “Displaying the Child
Window”.
POWERUP
INPUT
Select a...

29
Multifunctional Settings (continued) Multifunctional Settings (continued)
AUTO Menu
With the AUTO menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
ItemDescription
ADJUST
Pressing the  (or the ENTER) button performs the automatic adjustment. 
■At a RGB signal
The vertical position (V POSITION), the horizontal position (H POSITION), the
clock phase (H PHASE) and the horizontal size (H SIZE) will be automatically...

30
Multifunctional Settings (continued) Multifunctional Settings (continued)
ItemDescription
SEARCH
Select the TURN ON or the TURN OFF using the  /  buttons. :
TURN ON 
TURN OFF
When the TURN ON is selected, detecting no signal cycles through input ports
and displays the picture of retrieved signal.
memoWhen the TURN ON is selected, pressing the RGB button selects the
M1-D ports, and pressing the VIDEO button selects the COMPONENT port. 
memoIf no signal is found or the projector is unstable to find an...