Hitachi Cp-S310w Users Manual
Have a look at the manual Hitachi Cp-S310w Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 913 Hitachi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
TECHNICAL - 7 T TE EC CH HN NI IC CA AL L( (c co on nt ti in nu ue ed d) ) TECHNICAL Requesting projector status (Get command) (1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) from the computer to the projector. (2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer. Changing the projector settings (Set command) (1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector. (2) The projector changes the setting based on the above setting code. (3) The projector returns the response code ‘06H’ to the computer. Using the projector default settings (Reset Command) (1) The computer sends the default setting code Header + Command data (‘06H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector. (2) The projector changes the specified setting to the default value. (3) The projector returns the response code ‘06H’ to the computer. Increasing the projector setting value (Increment command) (1) The computer sends the increment code Header + Command data (‘04H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector. (2) The projector in creases the setting value on the above setting code. (3) The projector returns the response code ‘06H’ to the computer. Decreasing the projector setting value (Decrement command) (1) The computer sends the decrement code Header + Command data (‘05H’+‘00H’+ type (2 bytes) +‘00H’ + ‘00H’) to the projector. (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code ‘06H’ to the computer. When a command sent by the projector cannot be understood by the computer When the command sent by the projector cannot be understood, the error command ‘15H’ is returned by the computer. Some times, the projector ignores RS-232C commands during other works. If the error command ‘15H’ is returned, please send the same command again. When data sent by the projector cannot be practice When the command sent by the projector cannot be practiced, the the error code ‘1cH’ +‘xxxxH’ is returned. When the data length is greater than indicated by the data length code, the projector will ignore the excess data code. Conversely, when the data length is shorter than indicated by the data length code, an error code will be returned to the projector. NOTE: • Operation cannot be guaranteed when the projector receives an undefined command or data. • Provide an interval of at least 40ms between the response code and any other code. • The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data. • Commands are not accepted during warm-up.
TECHNICAL - 8 NamesOperation typeHeaderCommand data CRCActionTypeSetting code Blank ColorSet RedBE EF0306 003B D301 0000 3000 00 OrangeBE EF0306 00AB D201 0000 3001 00 GreenBE EF0306 005B D201 0000 3002 00 BlueBE EF0306 00CB D301 0000 3003 00 PurpleBE EF0306 00FB D101 0000 3004 00 WhiteBE EF0306 006B D001 0000 3005 00 BlackBE EF0306 009B D001 0000 3006 00 GetBE EF0306 0008 D302 0000 3000 00 MirrorSet NormalBE EF0306 00C7 D201 0001 3000 00 H InverseBE EF0306 0057 D301 0001 3001 00 V lnverseBE EF0306 00A7 D301 0001 3002 00 H&V InverseBE EF0306 0037 D201 0001 3003 00 GetBE EF0306 00F4 D202 0001 3000 00 FreezeSetNormalBE EF0306 0083 D201 0002 3000 00 FreezeBE EF0306 0013 D301 0002 3001 00 GetBE EF0306 00B0 D202 0002 3000 00 Menu ColorSet RedBE EF0306 007F D301 0003 3000 00 OrangeBE EF0306 00EF D201 0003 3001 00 GreenBE EF0306 001F D201 0003 3002 00 BLUEBE EF0306 008F D301 0003 3003 00 PurpleBE EF0306 00BF D101 0003 3004 00 TransparentBE EF0306 002F D001 0003 3005 00 GrayBE EF0306 00DF D001 0003 3006 00 GetBE EF0306 004C D302 0003 3000 00 StartupSetTurn ONBE EF0306 000B D201 0004 3000 00 Turn OFFBE EF0306 009B D301 0004 3001 00 GetBE EF0306 0038 D202 0004 3000 00 LanguageSet EnglishBE EF0306 00F7 D301 0005 3000 00 FrançaisBE EF0306 0067 D201 0005 3001 00 DeutschBE EF0306 0097 D201 0005 3002 00 EspañolBE EF0306 0007 D301 0005 3003 00 ItalianoBE EF0306 0037 D101 0005 3004 00 NorskBE EF0306 00A7 D001 0005 3005 00 NederlandsBE EF0306 0057 D001 0005 3006 00 PortuguêsBE EF0306 00C7 D101 0005 3007 00 JapaneseBE EF0306 0037 D401 0005 3008 00 GetBE EF0306 00C4 D302 0005 3000 00 Command data chart T TE EC CH HN NI IC CA AL L( (c co on nt ti in nu ue ed d) )
TECHNICAL - 9 TECHNICAL NamesOperation typeHeaderCommand data CRCActionTypeSetting code Magnify GetBE EF0306 007C D202 0007 3000 00 IncrementBE EF0306 001A D204 0007 3000 00 DecrementBE EF0306 00CB D305 0007 3000 00 Timer GetBE EF0306 0008 8602 0010 3100 00 IncrementBE EF0306 00CE 8604 0010 3100 00 DecrementBE EF0306 00BF 8705 0010 3100 00 Auto off GetBE EF0306 0008 8602 0010 3100 00 IncrementBE EF0306 006E 8604 0010 3100 00 DecrementBE EF0306 00BF 8705 0010 3100 00 Brightness ResetExecuteBE EF0306 0058 D306 0000 7000 00 Contrast ResetExecuteBE EF0306 00A4 D206 0001 7000 00 V.Position ResetExecuteBE EF0306 00E0 D206 0002 7000 00 H.Position ResetExecuteBE EF0306 00IC D306 0003 7000 00 H.Size ResetExecuteBE EF0306 0068 D206 0004 7000 00 Color Balance R ResetExecuteBE EF0306 0094 D306 0005 7000 00 Color Balance B ResetExecuteBE EF0306 00D0 D306 0006 7000 00 Aspect ResetExecuteBE EF0306 002C D206 0007 7000 00 Video Format ResetExecuteBE EF0306 0038 D106 0008 7000 00 Sharpness ResetExecuteBE EF0306 00C4 D006 0009 7000 00 Color ResetExecuteBE EF0306 0080 D006 000A 7000 00 Tint ResetExecuteBE EF0306 007C D106 000B 7000 00 Keystone ResetExecuteBE EF0306 0008 D006 000C 7000 00 Mirror ResetExecuteBE EF0306 00F4 D106 000D 7000 00 Blank Color ResetExecuteBE EF0306 00B0 D106 000E 7000 00 Startup ResetExecuteBE EF0306 004C D006 000F 7000 00 AutoExecuteBE EF0306 0091 D006 000A 2000 00 Blank on/offSetoffBE EF0306 00FB D801 0020 3000 00 onBE EF0306 006B D901 0020 3001 00 GetBE EF0306 00C8 D802 0020 3000 00 Timer on/offSetoffBE EF0306 0007 D901 0021 3000 00 onBE EF0306 0097 D801 0021 3001 00 GetBE EF0306 0034 D902 0021 3000 00 Error StatusGet BE EF0306 00D9 D802 0020 6000 00 (Example of Return) 00 00 01 00 02 00 03 00 (Normal) (Cover-error) (Fan-error) (Lamp-error) 04 00 05 00 06 00 (Temp-error) (Air flow-error) (Lamp-Time-over) Command data chart T TE EC CH HN NI IC CA AL L( (c co on nt ti in nu ue ed d) )
TECHNICAL - 10 T TE EC CH HN NI IC CA AL L( (c co on nt ti in nu ue ed d) ) NamesOperation typeHeaderCommand data CRCActionTypeSetting code PowerSetOFFBE EF0306 002A D301 0000 6000 00 ONBE EF0306 00BA D201 0000 6001 00 GetBE EF0306 0019 D302 0000 6000 00 Input SourceSet RGB1BE EF0306 00FE D201 0000 2000 00 RGB2BE EF0306 003E D001 0000 2004 00 VideoBE EF0306 006E D301 0000 2001 00 SVideoBE EF0306 009E D301 0000 2002 00 GetBE EF0306 00CD D202 0000 2000 00 Volume GetBE EF0306 0031 D302 0001 2000 00 IncrementBE EF0306 0057 D304 0001 2000 00 DecrementBE EF0306 0086 D205 0001 2000 00 MuteSetNormalBE EF0306 0046 D301 0002 2000 00 MuteBE EF0306 00D6 D201 0002 2001 00 GetBE EF0306 0075 D302 0002 2000 00 Brightness GetBE EF0306 0089 D202 0003 2000 00 IncrementBE EF0306 00EF D204 0003 2000 00 DecrementBE EF0306 003E D305 0003 2000 00 Contrast GetBE EF0306 00FD D302 0004 2000 00 IncrementBE EF0306 009B D304 0004 2000 00 DecrementBE EF0306 004A D205 0004 2000 00 Color Balance RGetBE EF0306 0001 D202 0005 2000 00 IncrementBE EF0306 0067 D204 0005 2000 00 DecrementBE EF0306 00B6 D305 0005 2000 00 Color Balance BGetBE EF0306 0045 D202 0006 2000 00 IncrementBE EF0306 0023 D204 0006 2000 00 DecrementBE EF0306 00F2 D305 0006 2000 00 Keystone GetBE EF0306 00B9 D302 0007 2000 00 IncrementBE EF0306 00DF D304 0007 2000 00 DecrementBE EF0306 000E D205 0007 2000 00 AspectSet 4:3BE EF0306 009E D001 0008 2000 00 16:9BE EF0306 000E D101 0008 2001 00 SmallBE EF0306 00FE D101 0008 2002 00 GetBE EF0306 00AD D002 0008 2000 00 Display Position at 16 : 9 or SmallSet DefaultBE EF0306 0062 D101 0009 2000 00 BottomBE EF0306 00F2 D001 0009 2001 00 TopBE EF0306 0002 D001 0009 2002 00 GetBE EF0306 0051 D102 0009 2000 00 Command data chart
TECHNICAL - 11 TECHNICAL NamesOperation typeHeaderCommand data CRCActionTypeSetting code V.Position GetBE EF0306 000D 8302 0000 2100 00 IncrementBE EF0306 006B 8304 0000 2100 00 DecrementBE EF0306 00BA 8205 0000 2100 00 H.Position GetBE EF0306 00F1 8202 0001 2100 00 IncrementBE EF0306 0097 8204 0001 2100 00 DecrementBE EF0306 0046 8305 0001 2100 00 H.Size GetBE EF0306 00B5 8202 0002 2100 00 IncrementBE EF0306 00D3 8204 0002 2100 00 DecrementBE EF0306 0002 8305 0002 2100 00 H.Phase GetBE EF0306 0049 8302 0003 2100 00 IncrementBE EF0306 002F 8304 0003 2100 00 DecrementBE EF0306 00FE 8205 0003 2100 00 Sharpness GetBE EF0306 00F1 7202 0001 2200 00 IncrementBE EF0306 0097 7204 0001 2200 00 DecrementBE EF0306 0046 7305 0001 2200 00 Color GetBE EF0306 00B5 7202 0002 2200 00 IncrementBE EF0306 00D3 7204 0002 2200 00 DecrementBE EF0306 0002 7305 0002 2200 00 Tint GetBE EF0306 0049 7302 0003 2200 00 IncrementBE EF0306 002F 7304 0003 2200 00 DecrementBE EF0306 00FE 7205 0003 2200 00 Video FormatSet AutoBE EF0306 009E 7501 0000 220A 00 NTSCBE EF0306 00FE 7101 0000 2204 00 PALBE EF0306 006E 7001 0000 2205 00 SECAMBE EF0306 006E 7501 0000 2209 00 NTSC 4.43BE EF0306 005E 7201 0000 2202 00 M-PALBE EF0306 00FE 7401 0000 2208 00 N-PALBE EF0306 000E 7101 0000 2207 00 GetBE EF0306 000D 7302 0000 2200 00 Command data chart T TE EC CH HN NI IC CA AL L( (c co on nt ti in nu ue ed d) )
REGULATORY NOTICES - 1 REGULATORY NOTICES WARNING:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. INSTRUCTIONS TO USERS:This equipment complies with the requirements of FCC (Federal Communication Commission) equipment provided that the following conditions are met. The cables (Power cord, RGB cable and other cables) may have to be used with the core set to the projector side. Use the cables which are included with the projector or specified. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Statement Warning For the Customers in CANADA NOTICE:This Class B digital apparatus complies with Canadian ICES-003. Pour les utilisateurs au Canada AVIS:Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. Core