Hitachi Cp-S310w Users Manual

ENGLISH
Liquid Crystal Projector
USERS MANUAL
ENGLISH-1
Thank you for purchasing this liquid crystal projector.
Please read the accompanying manual “SAFETY INSTRUCTIONS” and this “USERS
MANUAL” thoroughly to ensure correct usage through understanding. After reading,
store this instruction manual in a safe place for future reference.
CONTENTS
FEATURES ....................................P.2
BEFORE USE ................................P.2
Contents of Package ...........................P.2
Part Names...

ENGLISH-2
FEATURES
This liquid crystal projector is used to project various computer signals as well as NTSC / PAL /
SECAM video signals onto a screen. Little space is required for installation and large images can
easily be realized.
• Outstanding brightness
The UHB lamp and high-efficiency optical system assure a high level of brightness.
• Partial magnification function
Interesting parts of images can be magnified for closer viewing. 
• Distortion correction function
Distortion-free images are quickly...

ENGLISH-3
B BE
EF
FO
OR
RE
E 
 U
US
SE
E 
 (
(c
co
on
nt
ti
in
nu
ue
ed
d)
)
ENGLISH
Part Names
Control Panel (Refer to P.9 OPERATIONS)
Power Switch
AC Inlet
(to the Power Cord)
Ventilation Openings
(Intake)Zoom Knob
Focus Ring
Remote Control Sensor
Lens
Slide Lens Door
Foot Adjuster 
FRONT/LEFT VIEW OF
THE PROJECTOR
Speaker
Handle Hook
STANDBY/ON Button
MUTE Button
Foot Adjuster Button
Air Filter and Intake
(for the Cooling Fan)
Rear Foot AdjusterINPUT Button
LAMP Indicator
TEMP Indicator
POWER...

VIDEO Button
RGB Button
MENU SELECT Button
POSITION Button
RESET Button
VOLUME Button
VOLUME Button
FREEZE Button
MUTE Button
BLANK Button
STANDBY/ON Button
Button
MENU Button
MAGNIFY Button
MAGNIFY Button
MAGNIFY Button
AUTO Button
TIMER Button
Battery Holder
OFF
ENGLISH-4
B BE
EF
FO
OR
RE
E 
 U
US
SE
E 
 (
(c
co
on
nt
ti
in
nu
ue
ed
d)
)
Part Names (continued)
REMOTE CONTROL TRANSMITTER
(Refer to P.9 OPERATIONS)
NOTE:To prevent any malfunction;
• Do not give the remote control transmitter any physical...

ENGLISH-5
B BE
EF
FO
OR
RE
E 
 U
US
SE
E 
 (
(c
co
on
nt
ti
in
nu
ue
ed
d)
)
ENGLISH
Fixing the Handle
Fix the enclosed handle if you need.
1. Raise up the handle hook, and pass one end of the
handle through the hole of handle hook.
2. Buckle the end of the handle, as the right drawing.
3. Fix the other end of the handle to the other handle
hook in the same way.
CAUTION
Make sure the handle is fixed before carrying the projector with the handle. If the
projector should be dropped from the handle should...

ENGLISH-6
INSTALLATION
Installation of the Projector and Screen
CAUTION
• Install the projector in a suitable environment according to instructions of the
accompanying manual “SAFETY INSTRUCTIONS” and this manual.
• Please basically use liquid crystal projector at the horizontal position. 
If you use liquid
crystal projector by the lens up position, the lens down position and the side up position, this
may cause the heat inside to build up and become the cause of damage.
Be especially
careful not to...

ENGLISH-7
ENGLISH
I IN
NS
ST
TA
AL
LL
LA
AT
TI
IO
ON
N 
 (
(c
co
on
nt
ti
in
nu
ue
ed
d)
)
Cabling
RGB signal input:
Connect the RGB IN 1 or 2 terminal of the projector to the RGB signal output of the computer by the enclosed
RGB cable. 
For some modes, the optional Mac adapter is necessary. Consult your dealer to connect with the Apple
computer.
Some computers may have multiple display screen modes. Use of some of these modes will not be possible with
this projector.
Audio signal input (from computer)...

AUDIO IN VIDEO IN S-VIDEO IN
AUDIO
INAUDIO OUT
112
2USBRGB  IN
RGB  OUT CONTROL
Example of system setup
Video tape recorder
with S jack
Video tape recorder
Computer
(desktop type)Computer
(notebook type)
NOTE:
When connecting with notebook computer, set to valid the RGB external image output (setting
CRT display or simultaneous display of LCD and CRT). Please read instruction manual of the
notebook for more information.
Plug & Play
This projector is VESA DDC 1/2B compatible. Plug & play is possible by...

ENGLISH-9
ENGLISH
ENGLISH-9
OPERATIONS
Switching the Power Supply ON/OFF
Switching Power ON
1. Check that the power cord is connected correctly.
2. Set the power switch to [ | ]. The standby mode is selected, and the Power indicator is turned to
orange.
3. Press the STANDBY/ON  button on the control panel or the remote control transmitter.
Warm-up begins and the Power indicator blinks in green.
4. The Power indicator ceases blinking and turns to green when power is on. Open the slide lens
door.
5. Adjust...

ENGLISH-10ENGLISH-10
O OP
PE
ER
RA
AT
TI
IO
ON
NS
S 
 (
(c
co
on
nt
ti
in
nu
ue
ed
d)
)
Basic Operation
The Basic operations shown in Table 2 is performed from the projector control panel or the supplied
remote control transmitter. (items indicated by * may be used from the control panel)
NOTE:Use the remote control transmitter at a distance of approximately 3m from the sensor on the
front of the projector, and within a range of 30°left-right. Strong light and obstacles will
interfere with operation of...