Hitachi 55pd5200 Users Manual

9
ENGLISH
Remote control
ID SET button16
POWER OFF button13
POWER ON button13POWER ON/OFF button13
MENU button16
MUTE button14VOLUME UP/DOWN buttons14
RETURN button16
RECALL button15AUTO button16
PinP button34
ID button16
SELECT/ADJUST buttons16OK button16
Loading Batteries
1. Open the battery cover.
•  Slide back and remove the battery
cover in the direction of the arrow.
2. Load batteries.
•  Load two Size AA batteries included observing the correct
polarities.
3. Close the battery cover.
•  Replace...

10
Anti-tumble measures
Securing to a wall or pillar
Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar.
Securing desktop
1) Using wood screws (two), fasten the set to the clamping screw holes on the rear of the stand as shown.
2) Using commercially available wood screws, secure the set firmly in position. •  If you have purchased the model without the stand attached:
When installing the monitor, use the optional Desk-top Stand (CMPAD16N).
The Desk-top Stand has...

11
ENGLISH
Read SAFETY INSTRUCTIONS (        to        ) carefully to ensure maximum safety before
proceeding to these steps:
• Choose an appropriate site and install the product on a level table where the stand is secure.
• Install the monitor to have ready access to a power socket available.
• Make sure that the power switch of this device is turned off.
74
(1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this
device.
• See Product...

12①
Connect the power cord to this device.
➁Connect the power cord plug to the power outlet.
(The type of plug is different from this drawing for some countries.)
INSTALLATION INSTRUCTIONS (continued)
Power Cord Connection
• Use only the power cord provided.
• Do not use a power supply voltage other than that indicated (AC100-240V, 50/60Hz) as this may cause fire or electric shock.
CAUTION
Mounting the Speaker Unit
(option)
Refer to the instruction manual concerning mounting of the optional speaker...

13
ENGLISH
OPERATING INSTRUCTIONS
Turning Power On and Off
•To turn the monitor power ON, press the main power
switch on the monitor main unit to ON, and then press
the SUB POWER button or the ON/OFF or ON button on
the remote control.
•To turn the monitor power OFF, press the SUB POWER
button or the ON/OFF or OFF button on the remote
control, and then press the main power switch on the
monitor main unit to OFF.
•  During normal use, the main power switch is set in the ON
position, and the monitor can...

14
AV 1AV 2 RGB 1 RGB 2
AV 3 MUTE VOLVOL
AV 4
AUTO PinP
OK
SIZE RECALL
    MENU
ID
ID SET
OPERATING INSTRUCTIONS (continued)
Audio Mute
The audio volume can be temporarily mute by pressing
the MUTE button of the remote control.
• When a button is pressed, the volume adjustment
status guide (magenta) will be displayed.
•  The volume setting can be lowered by pressing the VOL- button
while the audio is mute.
•  The muting can be cancelled by pressing the VOL+ button or
MUTE button while the audio is mute....

15
ENGLISH
Size Switching
Each time the SIZE button of the remote control or the monitor is pressed, the screen display area will change in
sequence and the status will be displayed at the bottom of the screen.
 Normal        Full        Zoom1
 Real        Zoom3        Zoom2
SIZE button
AV 1AV 2 RGB 1 RGB 2
AV 3 MUTE VOL
AV 4
AUTO PinP
OK
SIZE RECALL
    MENU
ID
ID SET
SIZE buttonRECALL button
Input Signal Screen Display
The input signal status can be displayed on the screen by pressing the RECALL button...

16
AV 1AV 2 RGB 1 RGB 2
AV 3 MUTE VOLVOL
AV 4
AUTO PinP
OK
SIZE RECALL
    MENU
ID
ID SET
ID SET button
ID button
AUTO button
Using the Menu Screen
(On-screen display system)
When the MENU button is pressed, the adjustment menu
screen will be displayed; from there, PC signal adjustment
and setting is possible by using the SELECT button,
ADJUST button and OK button.
•  Refer to           -             concerning the adjustment items and the
settings.
Example: Selecting the Picture screen
1. Press the MENU...

17
ENGLISH
PICTURE MENU
  Picture
  Audio
  Timer
  Function
  Setup
  Language
     Select
   OK    SetPicture
  Contrast    :  + 31
  Brightness    :  – 31
  Colour    :       0
  Hue      :  + 31
  Picture Enhancement  :  Off 
  Colour Temperature  :  Normal
  Colour Temp.Adjust 
  Reset      Reset
     Select            Set          Return
OK
Picture
  Contrast    :  + 31
  Brightness    :  – 31
  Colour    :       0
  Hue      :  + 31
  Picture Enhancement  :  Off 
  Colour Temperature  :  Normal...

18
Selected charactersSetup hint
Audio ModeMovie         Music         Speech         Favourite
Movie: This selects the audio suitable for Movie.
Music: This selects the audio suitable for Music.
Speech: This selects the audio suitable for News, Talk show etc.
Favourite: This mode should be adjusted depending on user’s
preference.
TrebleSuppresses treble.Enhances treble.Adjust to taste.
BassSuppresses bass.Enhances bass.Adjust to taste.
BalanceSuppresses right-side sound.Suppresses left-side sound.Adjust...