Heckler And Koch HK USP Tactical, USP Expert Operators Manual
Here you can view all the pages of manual Heckler And Koch HK USP Tactical, USP Expert Operators Manual. The Heckler and Koch manuals for Firearms are available online for free. You can easily download all the documents as PDF.
Page 41
41 • Barrel locking block • Slide rails and grooves • All operating controls • Detent plate & detent slide (items 26 & 36, see diagram on pages 46 & 48) • Locking insert and guiding part in frame • Extractor Heavy Lube Lubrication runs down the surface when it is held in a verti- cal position No heavy lube is required on the HK USP. Reapply lubricant periodically during firing as it burns off from the heat. Apply lubricant using a clean shaving brush, cotton swabs, patches, or rag. A spray bottle...
Page 42
42 The Mark II HK UTL can be quickly attached or removed from the pistol and provides an immediate source of illumination. With easy to use controls, the UTL ensures law enforcement professionals or home owners can identify po- tential threats in critical low light situations. Using a USP fitted with a UTL makes alignment of the light and pistol easier than using a separate flashlight. A separate light can be difficult to use and hold while manipulating a pistol in a life threatening situation. The UTL...
Page 43
43 Key features of the HK UTL • compact and rugged design fits all models of the USP and USP Compact pistol • lamp brightness superior to most flashlights • focusable beam, spot to flood • clip-on/clip-off design, can be installed or removed in seconds • integral on-off switch prevents inadvertent operation Figure 43 The HK Mark II UTL can be installed and removed from any USP in seconds with one hand.• uses easily replaceable standard lithium batteries • fingertip on-off operation (toggle switch...
Page 45
45 45 Item Description Identification No. Item Description Identification No. Item Description Identification No. USP Parts List (.40 S&W and 9mm Models) 1 Extractor spring 214188 2 Extractor 214187 3 Roll pin, ISO 8748 - 3 X 14 mm (3x)980838 (extractor, firing pin, mag release) 4 Front sight* (6.4 mm)214220 Front sight* (6.6 mm)214221 Front sight* (6.8 mm) standard214222 Front sight*(7.0 mm)214223 Front sight* (7.2 mm)214224 Front sight* (7.4 mm)214225 6 Rear sight 214194 7 Barrel (.40 S&W)214209...
Page 47
47 47 Item Description Identification No. Item Description Identification No. Item Description Identification No. 1 Extractor spring 214188 2Extractor 214828 3 Roll pin, ISO 8748 - 3 X 14 mm(3x)980838 (extractor, firing pin, mag. release) 4 Front sight* (6.4 mm)214220 Front sight* (6.6 mm)214221 Front sight* (6.8 mm) standard214222 Front sight*(7.0 mm)214223 Front sight* (7.2 mm)214224 Front sight* (7.4 mm)214225 6 Rear sight 214194 7Barrel 214815 8Slide, incomplete 214827 Slide, complete 214826 9...
Page 48
48 SECTION 9 USP TACTICAL The HK USP Tactical pistol has all of the features found on the standard USP45 with the addition of the following: • adjustable trigger stop • rear sight with micro-meter adjustment for windage and elevation • high profile front sight • extended threaded barrel with O-ring • extended foorplate on magazine • loaded chamber indicator Adjustable trigger stop The trigger stop for the USP Tactical pistol is located on the trigger and limits the trigger travel immediately after...
Page 49
High profile front sight The high profile front sight is mounted on the slide in a dovetail and does not require adjustment. It allows the operator to obtain a normal sight picture when an optional sound suppressor is mounted. Extended barrel with O-ring and muzzle threads The 128.5 mm (5.06 inches) hammer forged polygonal barrel is engineered for a high level of accuracy. The high temperature rubber O-ring located towards the muzzle holds the barrel tightly in the slide during firing and enhances...
Page 50
217705 Slide, USP45 Tactical, incomplete. 217704 Slide, USP45 Tactical, complete 986844 Sight, rear adjustable, complete. 987505 Screwdriver for adjustable rear sight 50 Extended foorplate on magazine Trigger stop (adjust set screw with 1.5 mm allen wrench) Front target sight Threaded barrel with O-ring Windage adjustment screw Elevation adjustment screw (on top of sight) Adjustable trigger 215939 Sight, front, for use with adjustable rear sight 215864 Extractor with red chamber indicator 215801 Plug...