Hanns G Hx192rpb Users Manual

							
User’s Manual  
OPERATING INSTRUCTIONS 
 
GENERAL INSTRUCTIONS  
   
Press the power button to turn the monitor on or off. The other control buttons are located 
on the front panel of the monitor (See Figure 4). By changing these settings, the picture can 
be adjusted to your personal preferences. 
• The power cord should be connected. 
• Connect the Signal cable from the monitor to the VGA card. 
• Press the power button to turn on the monitor position. The power indicator will light up. 
 
 
 
 
Figure.4. Control Panel Buttons 
 
 
 
11 
 
						

							
User’s Manual 
 
FRONT PANEL CONTROL 
 
• Power Button: 
Press this button to switch ON/OFF of monitor’s power.  
 
• Power Indicator: 
Green — Power On mode. 
Orange — Power Saving mode. 
 
• MENU / ENTER:  
1. Activates the OSD menu or confirms adjustments to settings. 
2. Exit OSD volume display when in volume OSD status. 
 
• Volume < >:  
1. Activates the volume control when the OSD is OFF. 
2. Navigate through adjustment icons when OSD is ON or adjust a function when 
function is activated. 
 
• Auto Adjust button: 
When OSD menu is in off status, press this button to activate the Auto Adjustment 
function.  
(The Auto Adjustment function is used to optimized the H-Position, V-Position, Clock and 
Phase.) 
 
NOTES: 
 
• Do not install the monitor in a location near heat sources such as radiators or air dusts, 
or in a place subject to direct sunlight, or excessive dust or mechanical vibration or 
shock. 
• Save the original shipping box and packing materials, as they will come in handy if you 
ever have to ship your monitor. 
• For maximum protection, repackage your monitor as it was originally packed at the 
factory. 
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains 
may be removed with a cloth lightly dampened with a mild detergent solution. Never use 
strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage 
the cabinet. As a safety precaution, always unplug the monitor before cleaning it. 
 
12 
 
						

							
User’s Manual  
HOW TO ADJUST A SETTING 
MMaaiinn  MMeennuu  
 
FUNCTION DESCRIPTION  
Brightness Select the「Brightness」option on the「Main Menu」. Enter the option and 
adjust the level. 
Contrast Select the「Contrast」option on the「Main Menu」. Enter the option and 
adjust the level. 
Image Setting Select the「Image Setting」on the「Main Menu」, and then enter the 
option. 
Color Setting Select the「Color Setting」option on the 「Main Menu」, and then enter 
the option. 
OSD Setting Select the「OSD Setting」option on the 「Main Menu」, and then enter 
the option. 
Other Setting Select the「Other Setting」option on the 「Main Menu」, and then enter 
the option. 
Input Setting Select the「Input Setting」option to change between the analog (D-Sub) 
or Digital (DVI) source. Enter the option and select Analog or Digital. 
Exit Exit the OSD menu function. 
  
IImmaaggee  SSeettttiinngg  
 
FUNCTION DESCRIPTION  
H-position Select the 「H-position」option to shift the screen image to the left or 
right. Enter the option and adjust the level. 
V-position Select the 「V-position」option to shift the screen image up or down. 
Enter the option and adjust the level. 
Clock 
Adjustment 
Select the 「Clock Adjustment」option to reduce the vertical flicker of 
characters on the screen. Enter the option and adjust the level. 
13 
 
						

							
User’s Manual 
 
Phase 
Adjustment 
Select the「Phase Adjustment」option to reduce the horizontal flicker of 
characters on the screen. Enter the option and adjust the level. 
Exit Exit the OSD menu function. 
  
CCoolloorr  SSeettttiinngg  
 
FUNCTION DESCRIPTION  
5500K/6500K/ 
9300K/PD Move the cursor to one of the preset options and select it. 
User 
Move the cursor to the User option and select it 
1. To adjust the red, enter the「R」option and adjust the level. 
2. To adjust the green, enter the「G」option and adjust the level. 
3. To adjust the blue, enter the「B」option and adjust the level. 
Exit Exit the OSD menu function. 
 
OOSSDD  SSeettttiinngg  
 
FUNCTION DESCRIPTION  
OSD H-Position Select the 「OSD H-Position」option to adjust the horizontal position of 
the OSD. Enter the option and adjust the level. 
OSD V-position Select the「OSD V-Position」option to adjust the vertical position of the 
OSD. Enter the option and adjust the level. 
OSD Time-out Select the 「OSD Time-out」option to set the OSD time out from 10 to 
120 seconds. Enter the option and adjust the level. 
OSD 
Transparency 
Select the「OSD Transparency」option to adjust the transparency of the 
OSD. Enter the option and adjust the level.  
OSD Color Select the「OSD Color」setting option to adjust the color of the OSD. 
Enter the option and adjust the level. 
14 
 
						

							
User’s Manual  
Language Select the 「Language」 option to change the language of the OSD. 
Enter the option and select a language. 
(Reference only, the OSD Language is depended on selected model) 
Exit Exit the OSD menu function. 
  
OOtthheerr  SSeettttiinngg  
 
FUNCTION DESCRIPTION  
Volume Select the「Volume」option to set the volume level from 0 to 100. Enter 
the option and adjust the level. 
Sharpness Select the「Sharpness」option to adjust the sharpness of the display. 
Set the value from 0 to 6. 
DOS mode Select the「DOS mode」option to set the monitor for use with PC. Enter 
the option and select 720 × 400 or 640 × 400. 
Factory Preset Select the「Factory Preset」option to reset to the monitor’s default 
setting. This will erase the current settings. Enter the option and select 
On or Off. 
Exit Exit the OSD menu function. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
15 
 
						

							
User’s Manual 
 
PLUG AND PLAY  
 
Plug & Play DDC2B Feature 
 
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC 
STANDARD. It allows the monitor to inform the host system of its identity and, depending 
on the level of DDC used, communicate additional information about its display capabilities. 
The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request 
EDID information over the DDC2B channel. 
 
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO 
INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE 
MUST BE A VIDEO INPUT SIGNAL. 
 
This monitor meets the Green monitor standards as set by the Video Electronics Standards 
Association (VESA) and/or the United States Environmental Protection Agency (EPA) and 
The Swedish Confederation Employees (NUTEK). This feature is designed to conserve 
electrical energy by reducing power consumption when there is no video-input signal 
present. When there is no video input signal this monitor, following a time-out period, will 
automatically switch to an OFF mode. This reduces the monitors internal power supply 
consumption. After the video input signal is restored, full power is restored and the display 
is automatically redrawn. The appearance is similar to a Screen Saver feature except the 
display is completely off. The display is restored by pressing a key on the keyboard, or 
clicking the mouse. 
16 
 
						

							
User’s Manual  
TECHNICAL SUPPORT (FAQ) 
Q & A FOR GENERAL PROBLEMS 
PROBLEM & QUESTION POSSIBLE SOLUTION 
Power LED is not on *Check if the Power Switch is in the ON position 
*Power Cord should be connected 
No Plug & Play 
*Check if the PC system is Plug & Play compatible 
*Check if the Video Card is Plug & Play compatible 
*Check if any plug pins on the D-Sub or DVI-D connector 
are bent 
Picture is fuzzy *Adjust the Contrast and Brightness Controls. 
Picture bounces or a wave 
pattern is present in the 
picture 
*Move electrical devices that may cause electrical 
interference. 
The power LED is ON 
(orange) but there’s no 
video or no picture. 
*Computer Power Switch should be in the ON position. 
*Computer Video Card should be snugly seated in its slot 
*Make sure monitor’s video cable is properly connected to 
the computer. 
*Inspect monitor’s video cable and make sure none of the 
pins are bent. 
*Make sure computer is operational by hitting the CAPS 
LOCK key on the keyboard while observing the CAPS 
LOCK LED. The LED should either turn ON or OFF after 
hitting the CAPS LOCK key. 
Missing one of the primary 
colors (RED, GREEN, or 
BLUE) 
*Inspect the monitor’s video cable and make sure that 
none of the pins are bent. 
Screen image is not 
centered or sized properly. 
*Adjust pixel frequency CLOCK and PHASE or press 
hot-key (AUTO) 
Picture has color defects 
(white does not look white) *Adjust RGB color or select color temperature 
Horizontal or vertical 
disturbances on the screen 
*Use win 95/98/2000/NT/ME/XP shut-down mode Adjust 
CLOCK and PHASE or perform hot- key (AUTO). 
 
 
 
 
 
 
17 
 
						

							
User’s Manual 
 
ERROR MESSAGE & POSSIBLE SOLUTIONS 

						

							
User’s Manual  
APPENDIX 
SPECIFICATIONS 
 Driving system TFT Color LCD 
LCD Panel Size 48.2cm(19.0) 
 Pixel pitch 0.294mm(H) x 0.294mm(V) 
Video H-Frequency 31KHz – 80KHz 
 V-Frequency 56 – 75Hz 
Display Colors  16.2M Colors 
Max. Resolution  1280 x 1024 @75Hz 
Plug & Play  VESA DDC2BTM
ON Mode ≤36W 
Power Saving Mode ≤2W EPA ENERGY 
STAR®
OFF Mode ≤1W 
Input Connector  D-Sub 15pin  
DVI-D 24pin (Dual-Input Model) 
Maximum Screen Size Hor. :376.32mm; 
Ver. :301.06mm 
Power Source  100~240VAC, 50±3Hz,60±3Hz 
Environmental 
Considerations  
Operating Temp: 5° to 35°C 
Storage Temp.: -20° to 60°C 
Operating Humidity: 10% to 85% 
Dimensions 416(W)×414(H)×207(D) mm 
16.38”(W)×16.3”(H)×8.15”(D) 
Weight (GW/NW) 6.5 kg / 5.3 kg 
14.3 lb / 11.7 lb 
***The above specification is subject to actual product specification and is subject to 
change without prior notice. 
 
  
19