Hanns G Hx192rpb Users Manual

 
 
 
 
 
19 inch TFT LCD Monitor 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
HX192 
USER’S MANUAL 
 
 

User’s Manual 
 
Before operating the monitor, please read this manual thoroughly. This manual should be 
retained for future reference. 
 
 
FCC Class B Radio Frequency Interference Statement  
 
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio...

User’s Manual  
Recycling Information 
 
We, the Hanns.G care very much about our environment protection strategy and firmly 
believe that it helps us have healthier earth via appropriate treatment and recycling of 
industrial technology devices at the end-of-life. 
These devices contain recyclable materials, which can be re-decomposed and re-integrated 
into brand-new marvels. On the contrary, other material can be classified to hazardous and 
poisoned substances. We strongly encourage you to contact...

User’s Manual 
 
TABLE OF CONTENTS 
 
SAFETY NOTICE........................................................................\
...................5 
PRECAUTIONS........................................................................\
.................5 
SPECIAL NOTES ON LCD MONITORS...................................................6 
BEFORE YOU OPERATE THE MONITOR....................................................7 
FEATURES........................................................................\...

User’s Manual 
 
SAFETY NOTICE 
 
1. The changes or modifications not expressly approved by the party responsible for 
compliance could void the users authority to operate the equipment. 
2. Shielded interface cables and AC power cord, if any, must be used in order to comply 
with the emission limits. 
3. The manufacturer is not responsible for any radio or TV interference caused by 
unauthorized modification to this equipment. It is the responsibilities of the user to 
correct such interference....

User’s Manual 
 
SPECIAL NOTES ON LCD MONITORS 
 
The following symptoms are normal with LCD monitor and do not indicate a problem. 
 
• Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn 
off the Power Switch and then turn it on again to make sure the flicker disappears. 
• You may find slightly uneven brightness on the screen depending on the desktop pattern 
you use. 
• The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 
0.01%...

User’s Manual  
BEFORE YOU OPERATE THE MONITOR 
 
FEATURES 
 
• 19” TFT Color LCD Monitor 
• Crisp, Clear Display for Windows 
• Recommended Resolutions: 1280 X 1024 @60Hz 
• EPA ENERGY STAR®
• Ergonomic Design 
• Space Saving, Compact Case Design 
 
CHECKING THE CONTENTS OF THE PACKAGE 
   
The product package should include the following items: 
LCD Monitor 
  
Screen Base 
Cables and User manual 
 
Power Cord VGA Cable Audio Cable 
 
 
 
User’s manual Warranty card DVI-D Cable (dual input 
mode...

User’s Manual 
 
INSTALLATION INSTRUCTIONS 
 
Install   Remove 
 
Figure.1. Installing and Removing the Base 
 
INSTALLATION: 
 
1. Align the monitor with the opening in the base. 
2. Note that the longer section of the base points forward. 
3. Snap the monitor into its base. A clear click sound will affirm that the base is connected 
correctly. 
4. Verify that the monitor is securely attached to the base by looking at the bottom of the 
base and making sure that the clips are fully engaged in the base....

User’s Manual  
MAKING CONNECTIONS 
 
CONNECTING TO A PC: 
 
Turn off your computer before performing the procedure below.  
1. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the 
other end to the computer’s D-Sub port. 
2. Connect one end of the 24-pin DVI-D cable (Dual input mode optional) to the back of the 
monitor and connect the other end to the computer’s DVI-D port.  
3. Connect the audio cable between the monitors audio input and the PCs audio output 
(green...

User’s Manual 
 
ADJUSTING THE VIEWING ANGLE 
 
• For optimal viewing it is recommended to look at the full face of the monitor, then adjust 
the monitor’s angle to your own preference. 
• Hold the stand so you do not topple the monitor when you change the monitor’s angle. 
• You are able to adjust the monitor’s angle from -5° to 20°. 
 
 
 
 
Figure.3. Monitor Angle 
 
 
NOTES: 
 
• Do not touch the LCD screen when you change the angle. It may cause damage or 
break the LCD screen. 
• Be careful not to...