Hanns G Hw216dpb Users Manual

User’s Manual  
CONNECTING TO A A/V DEVICE: 
 
Connect A/V devices via the DVI and Audio Line in connectors at the back of the monitor. 
1. Connect the Y (green) connector on the DVI-I to YPbPr adapter cable to the Y output 
connector on the A/V device. 
2. Connect the Pb (blue) connector on the DVI-I to YPbPr adapter cable to the Pb/Cb 
output connector on the A/V device. 
3. Connect the Pr (red) connector on the DVI-I to YPbPr adapter cable to the Pr/Cr output 
on the A/V device. 
4. Connect the other...

User’s Manual 
 
12 
ADJUSTING THE VIEWING ANGLE 
 
1. For optimal viewing it is recommended to look at the full face of the monitor, then adjust 
the monitor’s angle to your own preference. 
2. Hold the stand so you do not topple the monitor when you change the monitor’s angle. 
3. You are able to adjust the monitor’s angle from 0° to 20°. 
 
 
20°
 
Figure 4: Monitor Angle 
 
NOTES: 
 
y Do not touch the LCD screen when you change the angle. It may cause damage or 
break the LCD screen. 
y Be careful...

User’s Manual  
OPERATING INSTRUCTIONS 
 
GENERAL INSTRUCTIONS  
   
Press the power button to turn the monitor on or off. The other control buttons are located 
on the front panel of the monitor (See Figure 5). By changing these settings, the picture can 
be adjusted to your personal preferences. 
y The power cord should be connected. 
y Connect the Signal cable from the monitor to the VGA card. 
y Press the power button to turn on the monitor. The power indicator will light up. 
 
 
 
 
 
31 42 6 5...

User’s Manual 
 14 
CONTROL PANEL BUTTON FUNCTIONS 
 
y Power Button: 
Press this button to switch ON/OFF of monitor’s power.   
 
y Power Indicator: 
Green  —  Power On mode. 
Orange  —  Power Saving mode. 
 
y MENU / ENTER:   
1.  Activates the OSD menu or confirms adjustments to settings. 
2.  Exit OSD volume display when in volume OSD status. 
 
y Vo l u m e   ◄/► :  
1.  Activate the volume control when the OSD is OFF. 
2.  Navigate through adjustment icons when OSD is ON or adjust a function when...

User’s Manual  
HOW TO ADJUST A SETTING 
MMaaiinn  MMeennuu  
 
FUNCTION DESCRIPTION  
Brightness Select the「Brightness」option on the「Main Menu」. Enter the option by 
pressing the 「Menu」 button again, and adjust the level. 
Contrast Select the「Contrast」option on the「Main Menu」. Enter the option by 
pressing the 「Menu」 button again, and adjust the level. 
Image Setting Select the「Image Setting」on the 「Main Menu」, and then enter the 
option. 
Color Setting Select the「Color Setting」option on the 「Main...

User’s Manual 
 
16 
V-position Select the 「V-position」option to shift the screen image up or down. Enter 
the option and adjust the level. 
Clock 
Adjustment 
Select the 「Clock Adjustment」option to reduce the vertical flicker of 
characters on the screen. Enter the option and adjust the level. 
Phase 
Adjustment 
Select the「Phase Adjustment」option to reduce the horizontal flicker of 
characters on the screen. Enter the option and adjust the level. 
Exit Exit the OSD menu function. 
 
(YPbPr mode)...

User’s Manual  
Exit Exit the OSD menu function. 
  
OOSSDD  SSeettttiinngg  
 
FUNCTION DESCRIPTION  
OSD 
H-Position 
Select the 「OSD H-Position」option to adjust the horizontal position of the 
OSD. Enter the option and adjust the level. 
OSD 
V-position 
Select the「OSD V-Position」option to adjust the vertical position of the 
OSD. Enter the option and adjust the level. 
OSD 
Time-out 
Select the 「OSD Time-out」option to set the OSD time out from 10 to 120 
seconds. Enter the option and adjust the...

User’s Manual 
 18 
DOS mode Select the「DOS mode 」option to set the monito r for use with PC. Enter 
the option and select 720  × 400 or 640 × 400. 
Factory Reset Select the「Factory Reset 」option to reset to the monitor’s default setting. 
This will erase the current settings. En ter the option and select On or Off. 
Exit Exit the OSD menu function. 
 
PLUG AND PLAY 
 
Plug & Play DDC2B Feature 
 
This monitor is equipped with VESA DDC2B capabilities ac cording to the VESA DDC 
STANDARD. It allows the...

User’s Manual  
19 
TECHNICAL SUPPORT (FAQ) 
Q & A FOR GENERAL PROBLEMS 
PROBLEM & QUESTION POSSIBLE SOLUTION 
Power LED is not on y Check if the Power Switch is in the ON position 
y Power Cord should be connected 
No Plug & Play 
y Check if the PC system is Plug & Play compatible 
y Check if the Video Card is Plug & Play compatible 
y Check if any plug pins on the D-Sub or DVI-D 
connectors are bent 
Picture is dim, too bright or 
fuzzy y Adjust the clock, phase or  Contrast and Brightness 
Controls....

User’s Manual 
 20 
ERROR MESSAGE & POSSIBLE SOLUTIONS 
y CABLE NOT CONNECTED : 
1.  Check that the signal-cable is properly c onnected, If the connector is loose, tighten 
the connector’s screws. 
2.  Check the signal-cable’s connection pins for damage. 
 
y  INPUT NOT SUPPORT : 
Your computer has been set to unsuitable di splay mode, set the computer to display 
mode given in the following table.   
 
RECOMMENDED AND SUPPORTED TIMING MODE:
 
(Analog / Digital mode) 
MODE RESOLUTION 
1 640×480  @60Hz...