Hanns G Hw216dpb Users Manual

 
 
 
 
 
 
22 inch Wide Screen 
TFT LCD Monitor 
 
 
 
 
 
 
 
 
 
 
  
 
HW216 
USER’S MANUAL 
 

User’s Manual 
 
2 
Before operating the monitor, please read this manual thoroughly. This manual should be 
retained for future reference. 
 
FCC Class B Radio Frequency Interference Statement  
 
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio...

User’s Manual  
 
 
Congratulations! 
 
The display you have just purchased carries the TCO’03 
Displays label. This means that your display is designed, 
manufactured and tested according to some of the strictest 
quality and environmental requirements in the world. This makes 
for a high performance product, designed with the user in focus 
that also minimizes the impact on our natural environment. 
 
Some of the features of the TCO’03 Display requirements: 
 
Ergonomics 
y Good visual ergonomics and...

User’s Manual 
 4 
Recycling Information 
 
We, Hanns.G, care very much about our environment  protection strategy and firmly believe 
that it helps us have healthier earth via appr opriate treatment and recycling of industrial 
technology devices at  the end-of-life. 
These devices contain recyclable materials,  which can be re-decomposed and re-integrated 
into brand-new marvels. On the contrary, other  material can be classified to hazardous and 
poisoned substances. We strongly encourage you  to...

User’s Manual  
5 
TABLE OF CONTENTS 
 
SAFETY NOTICE........................................................................\
..........................................6 
PRECAUTIONS........................................................................\
.....................................6 
SPECIAL NOTES ON LCD MONITORS........................................................................\
7 
BEFORE YOU OPERATE THE MONITOR........................................................................\...

User’s Manual 
 
6 
SAFETY NOTICE 
 
1. The changes or modifications not expressly approved by the party responsible for 
compliance could void the users authority to operate the equipment. 
2. Shielded interface cables and AC power cord, if any, must be used in order to comply 
with the emission limits. 
3. The manufacturer is not responsible for any radio or TV interference caused by 
unauthorized modification to this equipment. It is the responsibilities of the user to 
correct such interference....

User’s Manual  
SPECIAL NOTES ON LCD MONITORS 
 
The following symptoms are normal with LCD monitor and do not indicate a problem. 
 
y Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn 
off the Power Switch and then turn it on again to make sure the flicker disappears. 
y You may find slightly uneven brightness on the screen depending on the desktop pattern 
you use. 
y The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 
0.01% or...

User’s Manual 
 
8 
BEFORE YOU OPERATE THE MONITOR 
 
FEATURES 
 
y 22” Wide screen TFT Color LCD Monitor 
y Crisp, Clear Display for Windows 
y Recommended Resolutions: 1680 X 1050 @60Hz 
y EPA ENERGY STAR® 
y Ergonomic Design 
y Space Saving, Compact Case Design 
 
CHECKING THE CONTENTS OF THE PACKAGE 
The product package should include the following items: 
LCD Monitor 
 
 
 
 
Screen Base 
Cables and User manual 
 
Power Cord VGA Cable Audio Cable 
  
 
DVI-I to YPbPr Adapter Cable 3.5mm Mini Jack...

User’s Manual  
INSTALLATION INSTRUCTIONS 
 
Install   Remove 
 
 
Figure 1: Installing and Removing the Base 
 
INSTALLATION: 
 
1. Align the monitor with the opening in the base. 
2. Note that the longer section of the base points forward. 
3. Snap the monitor into its base. A clear click sound will affirm that the base is connected 
correctly. 
4. Verify that the monitor is securely attached to the base by looking at the bottom of the 
base and making sure that the clips are fully engaged in the...

User’s Manual 
 
10 
MAKING CONNECTIONS 
 
CONNECTING TO A PC: 
 
Turn off your computer before performing the steps below.  
1. Connect one end of the D-Sub cable to the back of the monitor and connect the other 
end to the computer’s D-Sub port. 
2. Connect one end of the DVI-D cable (Dual input mode optional) to the back of the 
monitor and connect the other end to the computer’s DVI-D port. 
3. Connect the audio cable between the monitors audio input and the PCs audio output 
(green port). 
4....