Hanns G Hw173dp0 Users Manual

							HW173
HSG1044
 
						

							User’s Manual 
Before operating the monitor, please read this manual thoroughly. This manual should be retained for 
future reference. 
FCC Class B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:
ƒReorient or relocate the receiving antenna. 
ƒIncrease the separation between the equipment and receiver.
ƒConnect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
ƒConsult the dealer or an experienced radio/TV technician for help. 
The device complies with Parts 15 of the FCC Rule. Operation is subject to the following two 
conditions¥(1) this device may not cause harmful interference¤and (2) this device must accept any 
interference received, including interference that may cause undesired operations. 
CANADA
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing 
Equipment Regulation. 
This device complies with requirement of EMC directive 89/336/EEC with regard to 
Electromagnetic Compatibility, and 73/23/EEC and 93/68/EEC with regard to Low Voltage directive. 
Socket-outlet shall be near the equipment and shall be accessible. 
2
 
						

							User’s Manual
RECYCLING INFORMATION 
We, theHanns.Gcare very much about our environment protection strategy and firmly believe that 
it helps us have healthier earth via appropriate treatment and recycling of industrial technology 
devices at the end-of-life. 
These devices contain recyclable materials, which can be re-decomposed and re-integrated into 
brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned 
substances. We strongly encourage you to contact the provided information to recycle this product. 
For more information, please visit 
www.hannsg.com
3
 
						

							User’s Manual 
TABLE OF CONTENTS 
SAFETY NOTICE...................................................................................................... 5
PRECAUTIONS..................................................................................................... 5
SPECIAL NOTES ON LCD MONITORS .......................................................... 6
BEFORE OPERATING THE MONITOR ............................................................... 7
FEATURES ............................................................................................................. 7
CHECKING THE CONTENTS OF THE PACKAGE ...................................... 7
POWER................................................................................................................... 8
MAKING CONNECTIONS.................................................................................. 9
ADJUSTING THE VIEWING ANGLE ............................................................. 10
OPERATING INSTRUCTIONS ............................................................................. 11
GENERAL INSTRUCTIONS............................................................................. 11
FRONT PANEL CONTROL .............................................................................. 12
HOW TO ADJUST A SETTINGS ...................................................................... 13
PLUG AND  PLAY ................................................................................................ 16
TECHNICAL SUPPORT (FAQ) ............................................................................. 17
Q & A FOR GENERAL PROBLEMS ............................................................... 17
ERROR MESSAGE & POSSIBLE SOLUTIONS ........................................... 18
APPENDIX ................................................................................................................ 20
SPECIFICATIONS .............................................................................................. 20
4
 
						

							User’s Manual 
SAFETY NOTICE 
1. The changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the 
emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized 
modification to this equipment. It is the responsibilities of the user to correct such interference. 
WARNING:
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high 
voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified 
personnel only.
PRECAUTIONS
xDo not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, 
swimming pool or in a wet basement.
xDo not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a 
person and cause serious damage to the appliance. Use only a cart or stand recommended by the 
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a 
mounting kit approved by the manufacturer and follow the kit instructions. 
xSlots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure 
reliable operation of the monitor and to protect it from overheating, be sure these openings are not 
blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place 
the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or 
cabinet unless proper ventilation is provided. 
xThe monitor should be operated only from the type of power source indicated on the label. If you 
are not sure of the type of power supplied to your home, consult your dealer or local power 
company.
xUnplug the unit during a lighting storm or when it will not be used for long period of time. This
will protect the monitor from damage due to power surges.
xDo not overload power strips and extension cords. Overloading can result in fire or electric shock. 
xNever push any object into the slot on the monitor cabinet. It could short circuit parts causing a 
fire or electric shock. Never spill liquids on the monitor.
xDo not attempt to service the monitor by yourself; opening or removing covers can expose you to 
dangerous voltages and other hazards. Please refer all servicing to qualified service personnel. 
xThe wall socket shall be installed near the equipment and shall be easily accessible. 
5
 
						

							User’s Manual 
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a problem.
xDue to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the
Power Switch and then turn it on again to make sure the flicker disappears. 
xYou may find slightly uneven brightness on the screen depending on the desktop pattern you use. 
xThe LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or 
less such as a missing pixel or a pixel lit all of the time.
xDue to the nature of the LCD screen, an afterimage of the previous screen may remain after 
switching the image, when the same image is displayed for hours. In this case, the screen is 
recovered slowly by changing the image or turning off the Power Switch for hours. 
xIf the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or 
service center for repair. Do not attempt to repair the monitor yourself. 
Lamp Disposal 
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR 
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE
INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE ATWWW.EIAE.ORG
.
FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK TTTTWWW.LAMPRECYCLE.ORG
.
6
 
						

							User’s Manual
BEFORE OPERATING THE MONITOR
FEATURES
x17” Wide screen TFT Color LCD Monitor 
xCrisp, Clear Display for Windows
x Recommended Resolutions: 1440 X 900@60Hz
xEPA ENERGY STAR®
x Ergonomic Design
xSpace Saving, Compact Case Design 
CHECKING THE CONTENTS OF THE PACKAGE
The product package should include the following items: 
LCD Monitor 
Screen Base
Cables and User manual 
Power Cord  VGA Cable DVI-D Cable (dual input mode
optional)
User’s manual Warranty card 
7
 
						

							User’s Manual 
INSTALLATION INSTRUCTIONS 
Install Remove
Figure.1. Installing and Removing the Base 
INSTALLATION:
1. Align the monitor with the opening in the base. 
2. Note that the longer section of the base points forward. 
3. Snap the monitor into its base. A clear click sound will affirm that the base is connected 
correctly.
4. Verify that the monitor is securely attached to the base by looking at the bottom of the base and 
making sure that the clips are fully engaged in the base. 
REMOVAL:
1. Flip over the monitor so that it is upside down. 
2. Press the 2 clips on the base that holds the monitor in place. 
3. Gently press and hold the 2 clips while pulling the base from the monitor unit they are 
unattached.
POWER
POWER SOURCE: 
1. Make sure that the power cord is the correct type required in your area. 
2. This LCD monitor has an Internal universal power supply that allows operation with either 
100/120V AC or 220/240V AC voltage areas (No user adjustment is required.) 
3. Connect one end of the AC-power cord to your LCD monitor’s AC-input socket, and the other 
end to the wall-outlet. 
8
 
						

							User’s Manual
MAKING CONNECTIONS 
CONNECTING TO A PC 
Turn off your computer before performing the procedure below.
1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the 
computer’s D-Sub port. 
2. Connect one end of DVI-D cable (Dual input mode optional) to the back of the monitor and 
connect the other end to the computer’s DVI-D port. 
3. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to 
the Wall outlet.
4. Turn on your monitor and computer.
Figure.2. Connecting to a PC 
1.Power AC  Input2.DVI-D Input (optional) 
3.VGA Input 
9
 
						

							User’s Manual 
ADJUSTING THE VIEWING ANGLE
xFor optimal viewing it is recommended to look at the full face of the monitor, and then adjust the
monitor’s angle to your own preference. 
xHold the stand so you do not topple the monitor when you change the monitor’s angle. 
xYou are able to adjust the monitor’s angle from -4q to 20q.
Figure.3. Monitor Angle
NOTES:
xDo not touch the LCD screen when you change the angle. It may cause damage or break the LCD
screen.
xBe careful not to place fingers or hands near the hinges when tilting the monitor, otherwise
pinching can result.
10