Hanns G Hw173dp0 Users Manual

HW173
HSG1044
 

User’s Manual 
Before operating the monitor, please read this manual thoroughly. This manual should be retained for 
future reference. 
FCC Class B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency...

User’s Manual
RECYCLING INFORMATION 
We, theHanns.Gcare very much about our environment protection strategy and firmly believe that 
it helps us have healthier earth via appropriate treatment and recycling of industrial technology 
devices at the end-of-life. 
These devices contain recyclable materials, which can be re-decomposed and re-integrated into 
brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned 
substances. We strongly encourage you to contact the...

User’s Manual 
TABLE OF CONTENTS 
SAFETY NOTICE...................................................................................................... 5
PRECAUTIONS..................................................................................................... 5
SPECIAL NOTES ON LCD MONITORS .......................................................... 6
BEFORE OPERATING THE MONITOR ............................................................... 7
FEATURES...

User’s Manual 
SAFETY NOTICE 
1. The changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the 
emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized 
modification to this equipment. It is the responsibilities of the user to correct such interference. 
WARNING:...

User’s Manual 
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a problem.
xDue to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the
Power Switch and then turn it on again to make sure the flicker disappears. 
xYou may find slightly uneven brightness on the screen depending on the desktop pattern you use. 
xThe LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or 
less such as...

User’s Manual
BEFORE OPERATING THE MONITOR
FEATURES
x17” Wide screen TFT Color LCD Monitor 
xCrisp, Clear Display for Windows
x Recommended Resolutions: 1440 X 900@60Hz
xEPA ENERGY STAR®
x Ergonomic Design
xSpace Saving, Compact Case Design 
CHECKING THE CONTENTS OF THE PACKAGE
The product package should include the following items: 
LCD Monitor 
Screen Base
Cables and User manual 
Power Cord  VGA Cable DVI-D Cable (dual input mode
optional)
User’s manual Warranty card 
7
 

User’s Manual 
INSTALLATION INSTRUCTIONS 
Install Remove
Figure.1. Installing and Removing the Base 
INSTALLATION:
1. Align the monitor with the opening in the base. 
2. Note that the longer section of the base points forward. 
3. Snap the monitor into its base. A clear click sound will affirm that the base is connected 
correctly.
4. Verify that the monitor is securely attached to the base by looking at the bottom of the base and 
making sure that the clips are fully engaged in the base. 
REMOVAL:
1....

User’s Manual
MAKING CONNECTIONS 
CONNECTING TO A PC 
Turn off your computer before performing the procedure below.
1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the 
computer’s D-Sub port. 
2. Connect one end of DVI-D cable (Dual input mode optional) to the back of the monitor and 
connect the other end to the computer’s DVI-D port. 
3. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to 
the Wall outlet.
4. Turn on...

User’s Manual 
ADJUSTING THE VIEWING ANGLE
xFor optimal viewing it is recommended to look at the full face of the monitor, and then adjust the
monitor’s angle to your own preference. 
xHold the stand so you do not topple the monitor when you change the monitor’s angle. 
xYou are able to adjust the monitor’s angle from -4q to 20q.
Figure.3. Monitor Angle
NOTES:
xDo not touch the LCD screen when you change the angle. It may cause damage or break the LCD
screen.
xBe careful not to place fingers or hands...