Home > Hanns.G > Monitor > Hanns G Hw173dbb Users Manual

Hanns G Hw173dbb Users Manual

Here you can view all the pages of manual Hanns G Hw173dbb Users Manual. The Hanns.G manuals for Monitor are available online for free. You can easily download all the documents as PDF.

Page 11

User’s Manual
OPERATING INSTRUCTIONS 
GENERAL INSTRUCTIONS 
Press the power button to turn the monitor on or off. The other control buttons are located on the 
front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to
your personal preference. 
xThe power cord should be connected. 
xConnect the Signal cable from the monitor to the VGA card. 
xPress the power button to turn on the monitor. The power indicator will light up. 
Figure.4. Control Panel Buttons...

Page 12

User’s Manual 
FRONT PANEL CONTROL 
x Power Button:
Press this button to switch ON/OFF monitor’s power.
x Power Indicator:
Green — Power On mode.
Orange — Power Saving mode.
xMENU / RETURN: 
1. Turn the OSD menu on/off or return to the previous menu.
2. Exit OSD menu when in volume OSD status. 
xAdjust < >: 
1. Navigate through adjustment icons when OSD is ON or adjust a function when function is 
activated.
x i Button:
1. Press the i button to select the input signal type. (There are VGA, DVI, YpbPr...

Page 13

User’s Manual
HOW TO ADJUST A SETTINGS
BRIGHTNESS/CONTRAST
BRIGHTNESS
Adjust the brightness value of the display according to your 
preference. SelectÈBRIGHTNESSÉoption to adjust the 
brightness value.
CONTRAST
Adjust the contrast value of the display according to your 
preference. SelectÈCONTRASTÉoption to adjust the contrast 
value.
X-CONTRAST
Optimal setting for high contrast images or videos. The dark and 
light areas of the image are automatically detected, and the 
contrast is enhanced to...

Page 14

User’s Manual 
H-POSITION
Select the ÈH-POSITIONÉoption to shift the screen image to the
left or right. Enter the option and adjust the level. [For VGA
only]
V-POSITIONSelect the ÈV-POSITIONÉoption to shift the screen image up or 
down. Enter the option and adjust the level. [For VGA only]
CLOCK
Select theÈCLOCKÉoption to reduce the vertical flicker of 
characters on the screen. Enter the option and adjust the level. 
[For VGA only]
PHASE
Select theÈPHASEÉoption to reduce the horizontal flicker...

Page 15

User’s Manual
FACTORY RESET 
Select the ÈFACTORY RESETÉoption to reset to the monitor’s
default setting. This will erase the current settings. Enter the 
option and select On or Off.
INFORMATIONDisplay Horizontal frequency/Vertical frequency/Resolution 
information.
15
 

Page 16

User’s Manual 
PLUG AND  PLAY
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD.
It allows the monitor to inform the host system of its identity and, depending on the level of DDC 
used, communicate additional information about its display capabilities. The DDC2B is a 
bidirectional data channel based on the I²C protocol. The host can request EDID information over the 
DDC2B channel. 
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE...

Page 17

User’s Manual
TECHNICAL SUPPORT (FAQ)
Q & A FOR GENERAL PROBLEMS 
PROBLEM & QUESTION POSSIBLE SOLUTION 
Power LED is not on *Check if the Power Switch is in the ON position. 
*Power Cord should be connected. 
No Plug & Play 
*Check if the PC system is Plug & Play compatible.
*Check if the Video Card is Plug & Play compatible.
*Check if any plug pins on the VGA or DVI-D connector are 
bent.
The display is too dark or too 
bright.*Adjust the Contrast and Brightness Controls. 
Picture bounces or a wave...

Page 18

User’s Manual 
ERROR MESSAGE & POSSIBLE SOLUTIONS 
ƒCABLE NOT CONNECTED: 
1. Check that the signal-cable is properly connected, If the connector is loose, tighten the 
connector’s screws. 
2. Check the signal-cable’s connection pins for damage.
ƒINPUT NOT SUPPORT:
Your computer has been set to unsuitable display mode, set the computer to display mode given 
in the following table. 
RECOMMENDED AND SUPPORTED TIMING MODE:
(Analog / Digital mode)
MODERESOLUTIONHORIZONTAL
FREQUENCY (KHz)
VERTICAL
FREQUENCY...

Page 19

User’s Manual
281400×1050 @60Hz 65.31759.978
291440×900 @60Hz 55.46959.901
301440×900 @60Hz 55.93559.887
311440×900 @75Hz 70.63574.984
19
 

Page 20

User’s Manual 
APPENDIX
SPECIFICATIONS
Driving systemTFT Color LCD 
Size17”LCD Panel
Pixel pitch 0.255mm(H) x0.255mm(V)
H-Frequency24KHz –80KHzVideo
V-Frequency55Hz– 75Hz 
Display Colors 16.2M Colors 
Max. Resolution 1440 x 900 @75Hz 
Plug & Play VESA DDC2BTM
ON Mode ”36W
Power Saving Mode ”2WEPA ENERGY STAR®
OFF Mode ”1W
Input TerminalVGA
DVI-D (optional) 
Maximum Screen Size Hor. : 367.2.mm
Ver. : 229.5mm
Power Source 100~240VAC±10%,50±3Hz,60±3Hz
Environmental
Considerations
Operating Temp: 5° to 35°C...
Start reading Hanns G Hw173dbb Users Manual

Related Manuals for Hanns G Hw173dbb Users Manual

All Hanns.G manuals