Hanns G Hw173dbb Users Manual
Here you can view all the pages of manual Hanns G Hw173dbb Users Manual. The Hanns.G manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 11
User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preference. xThe power cord should be connected. xConnect the Signal cable from the monitor to the VGA card. xPress the power button to turn on the monitor. The power indicator will light up. Figure.4. Control Panel Buttons...
Page 12
User’s Manual FRONT PANEL CONTROL x Power Button: Press this button to switch ON/OFF monitor’s power. x Power Indicator: Green — Power On mode. Orange — Power Saving mode. xMENU / RETURN: 1. Turn the OSD menu on/off or return to the previous menu. 2. Exit OSD menu when in volume OSD status. xAdjust < >: 1. Navigate through adjustment icons when OSD is ON or adjust a function when function is activated. x i Button: 1. Press the i button to select the input signal type. (There are VGA, DVI, YpbPr...
Page 13
User’s Manual HOW TO ADJUST A SETTINGS BRIGHTNESS/CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. SelectÈBRIGHTNESSÉoption to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference. SelectÈCONTRASTÉoption to adjust the contrast value. X-CONTRAST Optimal setting for high contrast images or videos. The dark and light areas of the image are automatically detected, and the contrast is enhanced to...
Page 14
User’s Manual H-POSITION Select the ÈH-POSITIONÉoption to shift the screen image to the left or right. Enter the option and adjust the level. [For VGA only] V-POSITIONSelect the ÈV-POSITIONÉoption to shift the screen image up or down. Enter the option and adjust the level. [For VGA only] CLOCK Select theÈCLOCKÉoption to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. [For VGA only] PHASE Select theÈPHASEÉoption to reduce the horizontal flicker...
Page 15
User’s Manual FACTORY RESET Select the ÈFACTORY RESETÉoption to reset to the monitor’s default setting. This will erase the current settings. Enter the option and select On or Off. INFORMATIONDisplay Horizontal frequency/Vertical frequency/Resolution information. 15
Page 16
User’s Manual PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel. THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE...
Page 17
User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible. *Check if the Video Card is Plug & Play compatible. *Check if any plug pins on the VGA or DVI-D connector are bent. The display is too dark or too bright.*Adjust the Contrast and Brightness Controls. Picture bounces or a wave...
Page 18
User’s Manual ERROR MESSAGE & POSSIBLE SOLUTIONS ƒCABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. ƒINPUT NOT SUPPORT: Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table. RECOMMENDED AND SUPPORTED TIMING MODE: (Analog / Digital mode) MODERESOLUTIONHORIZONTAL FREQUENCY (KHz) VERTICAL FREQUENCY...
Page 19
User’s Manual 281400×1050 @60Hz 65.31759.978 291440×900 @60Hz 55.46959.901 301440×900 @60Hz 55.93559.887 311440×900 @75Hz 70.63574.984 19
Page 20
User’s Manual APPENDIX SPECIFICATIONS Driving systemTFT Color LCD Size17”LCD Panel Pixel pitch 0.255mm(H) x0.255mm(V) H-Frequency24KHz –80KHzVideo V-Frequency55Hz– 75Hz Display Colors 16.2M Colors Max. Resolution 1440 x 900 @75Hz Plug & Play VESA DDC2BTM ON Mode ”36W Power Saving Mode ”2WEPA ENERGY STAR® OFF Mode ”1W Input TerminalVGA DVI-D (optional) Maximum Screen Size Hor. : 367.2.mm Ver. : 229.5mm Power Source 100~240VAC±10%,50±3Hz,60±3Hz Environmental Considerations Operating Temp: 5° to 35°C...