Hanns G Hl195abb Users Manual

                                                                    User’s Manual  
11 
MAKING CONNECTIONS 
 
CONNECTING TO A PC 
 
Turn off your computer before performing the procedure below.  
 
1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the 
computer’s VGA port. 
2. Connect the audio cable between the monitors audio input and the PCs audio output (green  
port).(Optional) 
3. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and...

User’s Manual 
 
12 
ADJUSTING THE VIEWING ANGLE 
 
 For optimal viewing it is recommended to look at the full face of the monitor, then adjust the 
monitor’s angle to your own preference. 
 Hold the stand so you do not topple the monitor when you change the monitor’s angle. 
 You are able to adjust the monitor’s angle from -5 to 15. 
 
 
 
 
Figure.3. Monitor Angle 
 
NOTES: 
 
 Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD 
screen. 
 Be careful not...

                                                                    User’s Manual  
13 
OPERATING INSTRUCTIONS 
 
GENERAL INSTRUCTIONS  
   
Press  the  power  button  to  turn  the  monitor  on  or  off.  The  other  control  buttons  are  located  on  the 
front  panel  of  the  monitor  (See  Figure  4).  By  changing  these  settings,  the  picture  can  be  adjusted  to 
your personal preferences. 
 The power cord should be connected. 
 Connect the Signal cable from the monitor to the VGA card. 
...

User’s Manual 
 
14 
FRONT PANEL CONTROL 
 
 Power Button: 
Press this button to switch ON/OFF of monitor’s power.  
 
 Power Indicator: 
Green — Power On mode.   
Orange — Power Saving mode. 
 
 MENU / RETURN:  
1. Turn the OSD menu on/off or return to the previous menu. 
2. Exit OSD menu when in volume OSD status.[The availability of this function depends upon the 
selected model] 
 
 Adjust ▲▼:  
1. Adjust Brightness and volume when the OSD is off. (Optional) 
2. Navigate  through  adjustment...

                                                                    User’s Manual  
15 
 
Resolution 
640x400@70Hz ↔ 720x400@70Hz 
640x400@85Hz ↔ 720x400@85Hz 
640x480@60Hz ↔ 720x480@60Hz 
1024x768@70Hz ↔ 1280x768@70Hz 
1280x768@60Hz ↔1360x768@60Hz 
1400x1050@60Hz ↔ 1680x1050@60Hz 
1400x1050@RB 60Hz ↔ 1680x1050@RB 60Hz 
1400x1050@75Hz ↔ 1680x1050@75Hz 
** The screen resolutions available will depend on the purchased model. 
 
 
NOTES: 
 
 Do not install the monitor in a location near heat sources such...

User’s Manual 
 
16 
HOW TO ADJUST A SETTINGS 
 
BRIGHTNESS/ CONTRAST 
BRIGHTNESS 
Adjust the brightness value of the display according to your 
preference. Select「BRIGHTNESS」option to adjust the 
brightness value. 
CONTRAST 
Adjust the contrast value of the display according to your 
preference. Select「CONTRAST」option to adjust the contrast 
value. 
X-CONTRAST 
Optimal setting for high contrast images or videos. The dark and 
light areas of the image are automatically detected, and the 
contrast is...

                                                                    User’s Manual  
17 
display, which does not ensure the image is shown as is or in 
initial scale. 「FIT」indicates scaling by the proportion of original 
images, which may cause the screen showing black bands. [The 
availability of this function depends upon the selected model] 
H-POSITION 
Select the 「H-POSITION」option to shift the screen image to the 
left or right. Enter the option and adjust the level. [For VGA 
only] 
V-POSITION...

User’s Manual 
 
18 
the OSD. Enter the option and adjust the level.  
OSD TIME-OUT Select 「OSD TIME-OUT」option to set the OSD time out from 
10 to 100 seconds. Enter the option and adjust the level. 
OSD COLOR 
To choose the color combination of the OSD window, select 
「OSD COLOR」option under 「OSD SETTING」menu, choose 
modes 1/2/3. 
SYSTEM 
AUDIO INPUT 
While transferring via the HDMI port, it is recommended to set 
AUDIO INPUT to HDMI; if no sound is outputted, it is 
recommended to select AUDIO INPUT...

                                                                    User’s Manual  
19 
 
PLUG AND PLAY  
 
Plug & Play DDC2B Feature 
 
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. 
It allows the monitor to inform the host system of its identity and, depending on the level of DDC 
used, communicate additional information about its display capabilities. The DDC2B is a 
bidirectional data channel based on the I²C protocol. The host can request EDID information...

User’s Manual 
 
20 
TECHNICAL SUPPORT (FAQ) 
Q & A FOR GENERAL PROBLEMS 
PROBLEM & QUESTION POSSIBLE SOLUTION 
Power LED is not on *Check if the Power Switch is in the ON position. 
*Power Cord should be connected. 
No Plug & Play 
*Check if the PC system is Plug & Play compatible. 
*Check if the Video Card is Plug & Play compatible. 
*Check if any plug pins on the VGA or DVI 
connector are bent. 
The display is too dark or too bright. *Adjust the Contrast and Brightness Controls. 
Picture bounces or a...