Hanns G Hl195abb Users Manual

 
 
 
HL195 
HSG1145 
OSD[V4.393] 
 

User’s Manual                                                                   OSD[4.393] 
 
2 
Before operating the monitor, please read this manual thoroughly. This manual should be retained for 
future reference. 
 
 
FCC Class B Radio Frequency Interference Statement  
 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a...

                                                                    User’s Manual  
3 
Congratulations! 
 
This display is designed for both you and the planet! 
 
 
The display you have just purchased carries the TCO 
Certified label. This ensures that your display is 
designed, manufactured and tested according to some of 
the strictest quality and environmental requirements in 
the world. This makes for a high performance product, 
designed with the user in focus that also minimizes the 
impact on the...

User’s Manual 
 
4 
RECYCLING INFORMATION 
 
We, the Hanns.G care very much about our environment protection strategy and firmly believe that 
it helps us have healthier earth via appropriate treatment and recycling of industrial technology 
devices at the end-of-life. 
These devices contain recyclable materials, which can be re-decomposed and re-integrated into 
brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned 
substances. We strongly encourage you to...

                                                                    User’s Manual  
5 
TABLE OF CONTENTS 
 
SAFETY NOTICE .................................................................................................. 6 
PRECAUTIONS ................................................................................................. 6 
SPECIAL NOTES ON LCD MONITORS ...................................................... 7 
BEFORE YOU OPERATE THE MONITOR...

User’s Manual 
 
6 
SAFETY NOTICE 
 
1. The changes or modifications not expressly approved by the party responsible for compliance 
could void the users authority to operate the equipment. 
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the 
emission limits. 
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized 
modification to this equipment. It is the responsibilities of the user to correct such interference. 
4....

                                                                    User’s Manual  
7 
SPECIAL NOTES ON LCD MONITORS 
 
The following symptoms are normal with LCD monitor and do not indicate a problem. 
 
 Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the 
Power Switch and then turn it on again to make sure the flicker disappears. 
 You may find slightly uneven brightness on the screen depending on the desktop pattern you use. 
 The LCD screen has...

User’s Manual 
 
8 
BEFORE YOU OPERATE THE MONITOR 
 
FEATURES 
 
 47cm / 18.5 Wide Screen TFT Color LED Backlight Monitor   
 Crisp, Clear Display for Windows 
 EPA ENERGY STAR®  
 GP Green Product 
 Ergonomic Design 
 Space Saving, Compact Case Design 
 
CHECKING THE CONTENTS OF THE PACKAGE 
   
The product package should include the following items: 
LCD Monitor 
   
   
 
Cables and User manual 
   
 
 
Power Cord Warranty Card Quick Start Guide User’s Manual VGA Cable 
    
    
  
 

                                                                    User’s Manual  
9 
INSTALLATION INSTRUCTIONS 
 
INSTALL  REMOVE 
 
      
Figure.1. Installing and Removing the Base 
 
INSTALLATION: 
 
1. Align the monitor with the opening in the base. 
2. Note that the longer section of the base points forward. 
3. Snap the monitor into its base. A clear click sound will affirm that the base is connected 
correctly. 
4. Verify that the monitor is securely attached to the base by looking at the bottom...

User’s Manual 
 
10 
SETTING THE MONITOR ON THE WALL 
DISSEMBLING THE STAND BASE: 
 
1. Disconnect all the cables and cords from the Monitor to prevent breakage. 
2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to 
prevent any damage to the Monitor. 
3. Squeeze the sides to release the retaining plastic tabs and pull the stand cover off. 
4. Gently remove the stand base.  
       
 
 
 
 
 
 
 
 
 
 
 
 
 (For reference only) 
 
 
 
 
 
 
Wall mounting the...