Home > Hanns.G > Monitor > Hanns G Ha222dpb Users Manual

Hanns G Ha222dpb Users Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Hanns G Ha222dpb Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 55 Hanns.G manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
                                                                        User’s Manual  
    MAKING CONNECTIONS 
     
    CONNECTING TO A PC 
     
    Turn off your computer before performing the procedure below.   
     
    1. Connect one end of the VGA cable to the back of  the monitor and connect the other end to the 
    computer’s VGA port. 
    2.  Connect one end of the DVI cable (optional) to th e back of the monitor and connect the other end 
    to the computer’s DVI port. 
    3.  Connect the audio cable (optional) between the  monitors audio input and the PCs audio output 
    (green port). 
    4.  Plug one end of the AC power cord to the LCD m onitor’s AC input socket, and the other end to 
    Wall outlet. 
    5.  Turn on your monitor and computer. 
     
     
     
     
    Figure.2. Connecting to a PC 
     
    1 VGA Input 2 DVI Input (optional) 
    3 LINE IN (optional) 4 Power AC  Input 
    11 
     
    						
    							
    User’s Manual 
     
    ADJUSTING THE VIEWING ANGLE 
     
    •  For optimal viewing it is recommended to look at the full face of the monitor, then adjust the 
    monitor’s angle to your own preference. 
    •  Hold the stand so you do not topple the mon itor when you change the monitor’s angle. 
    •  You are able to adjust the monitor’s angle from -5 ° to 15° . 
     
     
     
     
    Figure.3.  Monitor Angle
     
     
    NOTES: 
     
    •  Do not touch the LCD screen when you change th e angle. It may cause damage or break the LCD 
    screen. 
    •  Be careful not to place fingers or hands near  the hinges when tilting the monitor, otherwise 
    pinching can result.  
     
    12 
     
    						
    							
                                                                        User’s Manual  
    OPERATING INSTRUCTIONS 
     
    GENERAL INSTRUCTIONS   
       
    Press the power button to turn the monitor on or off. The other control buttons are located on the 
    front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to 
    your personal preferences. 
    •  The power cord should be connected. 
    •  Connect the Signal cable from  the monitor to the VGA card. 
    •  Press the power button to turn on the m onitor. The power indicator will light up. 
     
     
     
    Menu / Return 
     
    ▲ [-] 
    Brightness adjustment button 
     
    ▼  [+]   
    Volume adjustment button 
    Auto adjustment/ Enter     
    《Analog Input Models 》 
     
    Input source change/ Enter   
    《Digital Input Models》 
     
    Power Button 
     
      Figure.4. Control Panel Buttons  
    13 
     
    						
    							
    User’s Manual 
     
    FRONT PANEL CONTROL 
     
    • Power Button: 
    Press this button to switch ON/OFF of monitor’s power.   
     
    • Power Indicator: 
    Green  — Power On mode.  
    Orange — Power Saving mode. 
     
    •  MENU / RETURN:   
    1. Turn the OSD menu on/off or re turn to the previous menu. 
    2. Exit OSD menu when in volume OSD status. 
     
    • Adjust ▲▼:  
    1. Adjust Brightness and volume when the OSD is off. 
    2. Navigate through adjustment icons when OSD is ON or adjust a function when function is 
    activated. 
     
    •【 i  】Button:  《Analog Input Models 》 
    1. The OSD menu is used as《confirmation 》function during start-up. 
    2. The 「Auto adjustment 」  function works only for VGA input. (The auto adjustment function is 
    used to optimize the  「horizontal position」, 「vertical position 」,「 clock 」,and  「phase」 .) 
     
    •【 i  】Button:  《Digital Input Models 》 
      1. Press【 i 】to enter Source selections . (Selections include VGA, HDMI, etc. The actual 
    selections may very depending on the models. This function is only available in models with 
    digital inputs) 
    2. The OSD menu is used as《confirmation 》function during start-up. 
    3. Press and hold this button more than 3 seconds will start  「Auto Adjust 」  function when using 
    VGA input only. (The auto adjustment function is used to optimize the  「horizontal position」, 
    「vertical position 」,「clock」,and  「phase」.) 
     
    • Hotkeys: 
      1. Restore Brightness and Contrast defaults: 
            To reset both the Brightness and Cont rast to their default values, press the 【▲】and  【▼ 】 keys 
    at the same time. 
      2. ASPECT  RATIO: 
        Press 【MENU】 +【▼】 key to change to  「FULL MODE」 or  「FIT MODE」. 
       3. Change Resolution: 
            For similar screen display resolutions (see table below), the screen resolution can be changed by 
    pressing the 【MENU】 +【▲ 】button to achieve the optimal display quality. 
       4. Change Preset Mode: [The availability of this function depends upon the selected model]  
    Press【MENU】key for 3 seconds to select  one of the following modes「PC」,「 MOVIE」,
    「GAME 」,「ECO 」. Default is 「PC 」.   
    14 
     
    						
    							
                                                                        User’s Manual  
     
    Resolution 
    640x400@70Hz ↔ 720x400@70Hz 
    640x400@85Hz ↔ 720x400@85Hz 
    640x480@60Hz ↔ 720x480@60Hz 
    1024x768@70Hz  ↔ 1280x768@70Hz 
    1280x768@60Hz ↔1360x768@60Hz 
    1400x1050@60Hz  ↔ 1680x1050@60Hz 
    1400x1050@RB 60Hz  ↔ 1680x1050@RB 60Hz 
    1400x1050@75Hz ↔ 1680x1050@75Hz 
    1400x900@60Hz ↔ 1600x900@60Hz 
    1360x768@60Hz ↔ 1366x768@60Hz 
    ** The screen resolutions available will depend on the purchased model.   
     
     
    NOTES: 
     
    •  Do not install the monitor in a location near heat  sources such as radiators or air dusts, or in a 
    place subject to direct sunlight, or excessive  dust or mechanical vibration or shock. 
    •  Save the original shipping box and packing materials, as they will come in handy if you ever have 
    to ship your monitor. 
    •  For maximum protection, repackage your monitor as  it was originally packed at the factory. 
    •  To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be 
    removed with a cloth lightly dampened with a m ild detergent solution. Never use strong solvents 
    such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety 
    precaution, always unplug the monitor before cleaning it. 
    15 
     
    						
    							
    User’s Manual 
     
    HOW TO ADJUST A SETTINGS 
     
    BRIGHTNESS/ CONTRAST 
    BRIGHTNESS 
    Adjust the brightness value of the display according to your 
    preference. Select「BRIGHTNESS」option to adjust the 
    brightness value. 
    CONTRAST 
    Adjust the contrast value of the display according to your 
    preference. Select 「CONTRAST」option to adjust the contrast 
    value. 
    X-CONTRAST 
    Optimal setting for high contrast  images or videos. The dark and 
    light areas of the image are automatically detected, and the 
    contrast is enhanced to provide a clearer, sharper image. Also, 
    you may select the「X-CONTRAST」option. 
    PRESET MODE 
    Select the preset mode accord ing to your preference: PC/ 
    MOVIE/ GAME/ ECO 
    [The availability of this function depends upon the selected 
    model] 
    INPUT SETTING 
    INPUT SETTING 
    Select the  「INPUT SETTING 」option to change between analog 
    (VGA) or Digital (DVI) source.  Enter the option and select 
    Analog or Digital. [Dual input mode optional]  
    AUTO SEARCH 
    From the Signal Selection menu, select the 「AUTO SEARCH」
    option to activate or deactivate the automatic signal search 
    function. [For DVI/ HDMI Input only]  
    COLOR SETTING 
    WA R M  
    NATURE (6500K) 
    COOL 
    Adjust the color temperature va lue of the display according to 
    your preference: WARM /NATURE/ COOL. 
    USER 
    Move the cursor to the User option and select it,   
    1. To adjust the red, enter the「R」option and adjust the level. 
    2. To adjust the green, enter the 「G」option and adjust the level.
    3. To adjust the blue, enter the 「B」option and adjust the level. 
    IMAGE SETTING 
    AUTO ADJUST 
    The auto adjustment function is used to optimize the 
    「H-POSITION 」, 「V-POSITION 」,
    「CLOCK 」,and  「PHASE」 . 
    [For VGA Input only] 
    ASPECT RATIO When the aspect ratio of scr een is distorted, you may make 
    adjustments by using this function. 「FULL」indicates full screen 
    16 
     
    						
    							
                                                                        User’s Manual  
    display, which does not ensure the image is shown as is or in 
    initial scale. 「FIT」indicates scaling by the  proportion of original 
    images, which may cause the screen showing black bands.  [The 
    availability of this function depends upon the selected model]  
    H-POSITION 
    Select the 「H-POSITION 」option to shift the screen image to the 
    left or right. Enter the op tion and adjust the level. [For VGA 
    only] 
    V-POSITION Select the  「V-POSITION 」option to shift the screen image up or 
    down. Enter the option and adjust the level.  [For VGA only] 
    CLOCK  
    Select the 「CLOCK」option to reduce the vertical flicker of 
    characters on the screen. Enter  the option and adjust the level. 
    [For VGA only] 
    PHASE  
    Select the「PHASE 」option to reduce the ho rizontal flicker of 
    characters on the screen. Enter  the option and adjust the level. 
    [For VGA only] 
    SHARPNESS 
    Select the「SHARPNESS 」option to adjust the sharpness of the 
    display. Set the value from -2 to 2. 
    VIDEO MODE 
    Choose「VIDEO MODE 」or 「PC MODE 」for video 
    transmission. While using HDMI or HDMI to DVI ports for 
    video transmission, the video will  appear cut off slightly around 
    the edge; choose「PC MODE」to view videos with complete 
    image. (VIDEO MODE only functions  for inputs from HDMI or 
    DVI that supports HDCP video (YUV format))  
    RESPONSE TIME   
    Setup the display response time through the Response time 
    function. Available settings are  MINIMUM, 
    INTERMEDIATE, and MAXIMUM . [This feature is limited to 
    specific models only.] 
    OSD SETTING 
    LANGUAGE 
    Select 「LANGUAGE 」  option to change the language of the 
    OSD. Enter the option and select a language.  [Reference only, 
    the OSD Language depends on the selected model]  
    H-POSITION Select 「H-POSITION 」option to adjust the horizontal position of 
    the OSD. Enter the option and adjust the level. 
    V-POSITION Select  「V-POSITION 」option to adjust the vertical position of 
    the OSD. Enter the option and adjust the level. 
    TRANSPARENCY Select 「TRANSPARENCY 」option to adjust the transparency of 
    17 
     
    						
    							
    User’s Manual 
     
    the OSD. Enter the option and adjust the level.   
    OSD TIME-OUT Select 「OSD TIME-OUT 」option to set the OSD time out from 
    10 to 100 seconds. Enter the option and adjust the level. 
    OSD COLOR 
    To choose the color combination of the OSD window, select 
    「OSD COLOR 」option under  「OSD SETTING 」menu, choose 
    modes 1/2/3. 
    SYSTEM 
    AUDIO INPUT 
    While transferring via the HDMI port, it is recommended to set 
    AUDIO INPUT to HDMI; if no sound is outputted, it is 
    recommended to select AUDIO INPUT as PC, and make sure the 
    PC audio output cable is connect ed to monitor’s LINE IN (or 
    AUDIO IN) port. [For HDMI Input only]  
    VOLUME  
    Select the 「VOLUME 」option to change the volume level. Enter 
    the option and adjust the level.  [This function applies only to 
    models with incorporated audio.] 
    ●  By high volume, risk of hearing damage exists. 
    MUTE 
    Select the「MUTE」 option to switch the function On or Off.  [The 
    availability of this function depends upon the selected model. 
    Adjusting the volume while muted cancels Mute mode.]  
    DDC/CI Select the 「DDC/CI」option to switch the function On or Off. 
    [Dual input mode optional]  
    FACTORY RESET 
    Select the 「FACTORY RESET 」option to reset to the monitor’s 
    default setting. This will erase  the current settings. Enter the 
    option and select On or Off. 
    INFORMATION Display Horizontal frequency/Vertical frequency/Resolution 
    information.  
     
    18 
     
    						
    							
                                                                        User’s Manual  
    PLUG AND  PLAY   
     
    Plug & Play DDC2B Feature 
     
    This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. 
    It allows the monitor to inform the host system  of its identity and, depending on the level of DDC 
    used, communicate additional information about its display capabilities. The DDC2B is a 
    bidirectional data channel based on the I²C protoc ol. The host can request EDID information over the 
    DDC2B channel. 
     
    THIS MONITOR WILL APPEAR TO BE NON- FUNCTIONAL IF THERE IS NO VIDEO 
    INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE 
    MUST BE A VIDEO INPUT SIGNAL. 
     
    This monitor meets the Green monitor standard s as set by the Video Electronics Standards 
    Association (VESA) and/or the United States Environmental Protection Agency (EPA) and The 
    Swedish Confederation Employees ( NUTEK). This feature is designed to conserve electrical energy 
    by reducing power consumption when there is no vi deo-input signal present. When there is no video 
    input signal this monitor, following a time-out  period, will automatically switch to power saving 
    mode. This reduces the monitors internal power s upply consumption. After the video input signal is 
    restored, full power is restored and the display is automatically re drawn. The appearance is similar to 
    a Screen Saver feature except the  display is completely off. The display is restored by pressing a 
    key on the keyboard, or clicking the mouse.  
    19 
     
    						
    							
    User’s Manual 
     
    TECHNICAL SUPPORT (FAQ) 
    Q & A FOR GENERAL PROBLEMS 
    PROBLEM & QUESTION POSSIBLE SOLUTION 
    Power LED is not on *Check if the Power Switch is in the ON position. 
    *Power Cord should be connected. 
    No Plug & Play 
    *Check if the PC system is Plug & Play compatible. 
    *Check if the Video Card is Plug & Play compatible. 
    *Check if any plug pins on the VGA or DVI 
    connector are bent. 
    The display is too dark or too bright. *Adjust the Contrast and Brightness Controls. 
    Picture bounces or a wave pattern is 
    present in the picture 
    *Move electrical devices that may cause electrical 
    interference. 
    The power LED is ON (orange) but 
    there’s no video or no picture. 
    *Computer Power Switch should be in the ON 
    position. 
    *Computer Video Card should be snugly seated in its 
    slot. 
    *Make sure monitor’s video cable is properly 
    connected to the computer. 
    *Inspect monitor’s video cable and make sure none 
    of the pins are bent. 
    *Make sure computer is operational by hitting the 
    CAPS LOCK key on the keyboard while observing 
    the CAPS LOCK LED. The LED should either turn 
    ON or OFF after hitting the CAPS LOCK key. 
    Missing one of the primary colors (RED, 
    GREEN, or BLUE) 
    *Inspect the monitor’s video  cable and make sure that 
    none of the pins are bent. 
    Screen image is not centered or sized 
    properly. 
    * Adjust pixel frequency CLOCK and PHASE or 
    press hot-key ( i Button). 
    Picture has color defects 
    (White does not look white)  *Adjust RGB color or select color temperature.  
    The screen resolution needs to be adjusted
    *Use win 2000/ME/XP Right click anywhere on 
    desktop and select Properties>Settings >Screen 
    Resolution . Use the silder to adjust the reslution 
    and click Apply. 
    No sound is outputted from monitor’s 
    built-in speaker 
    *Make sure PC audio output  cable is connected to 
    screen’s LINE IN port (or AUDIO IN port). 
    *Make sure the sound volume adjustment can be 
    clearly identified. 
    *Make sure the System > Silence option in the 
    monitor menu is on. 
    *While transferring via  HDMI port but no sound is 
    outputted, it is recommended to select AUDIO 
    20 
     
    						
    All Hanns.G manuals Comments (0)

    Related Manuals for Hanns G Ha222dpb Users Manual