Hanns G Ha222dpb Users Manual
Have a look at the manual Hanns G Ha222dpb Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 55 Hanns.G manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
User’s Manual Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Ho wever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cau se harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ƒ Reorient or relocate the receiving antenna. ƒ Increase the separation between the equipment and receiver. ƒ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ƒ Consult the dealer or an experien ced radio/TV technician for help. The device complies with Parts 15 of the FCC Ru le. Operation is subject to the following two conditions ﹕(1) this device may not cau se harmful interference﹔and (2) this device must accept any interference received, including interference that may cause undesired operations. CANADA This Class B digital apparatus meets all requi rements of the Canadian Interference-Causing Equipment Regulation. This device complies with requirement of EMC directive 2004/108/EC with regard to Electromagnetic Compatibility, and 73/23/EEC and 93/ 68/EEC with regard to Low Voltage directive. Socket-outlet shall be near the equipment and shall be accessible. 2
User’s Manual Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is de signed, manufactured and tested according to some of the stri ctest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics • Good visual ergonomics and image quality in orde r to improve the working environment for the user and to reduce sight and st rain problems. Important parame ters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy • Energy-saving mode after a certain time – benefi cial both for the user and the environment • Electrical safety Emissions • Electromagnetic fields • Noise emissions Ecology • The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001 • Restrictions on { chlorinated and brominated flame retardants and polymers { heavy metals such as cadmium, mercury and lead. The requirements included in this label have be en developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Sin ce the end of the 1980s TCO has been involved in influencing the developm ent of IT equipment in a more user-friendly direction. Our labelling system started with displa ys in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com 3
User’s Manual RECYCLING INFORMATION We, the Hanns.G care very much about our environment prot ection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, whic h can be re-decomposed and re-integrated into brand-new marvels. On the contrary, other materi al can be classified to hazardous and poisoned substances. We strongly encourage you to contact the provided information to recycle this product. For more information, please visit www.hannsg.com 4
User’s Manual TABLE OF CONTENTS SAFETY NOTICE........................................................................\ .......................... 6 PRECAUTIONS........................................................................\ ......................... 6 SPECIAL NOTES ON LCD MONITORS ...................................................... 7 BEFORE YOU OPERATE THE MONITOR ...................................................... 8 FEATURES........................................................................\ ................................. 8 CHECKING THE CONTENTS OF THE PACKAGE .................................. 8 INSTALLATION INSTRUCTIONS................................................................ 9 POWER........................................................................\ ....................................... 9 SETTING THE MONITOR ON THE WALL .............................................. 10 MAKING CONNECTIONS........................................................................\ .....11 DJUSTING THE VIEWING ANGLE ............................................................ 12 OPERATING INSTRUCTIONS........................................................................\ . 13 GENERAL INSTRUCTIONS........................................................................\ . 13 FRONT PANEL CONTROL........................................................................\ .. 14 HOW TO ADJUST A SETTINGS .................................................................. 16 PLUG AND PLAY........................................................................\ .................... 19 TECHNICAL SUPPORT (FAQ) ........................................................................\ . 20 Q & A FOR GENERAL PROBLEMS ........................................................... 20 ERROR MESSAGE & POSSIBLE SOLUTIONS ....................................... 22 APPENDIX........................................................................\ .................................... 24 SPECIFICATIONS ........................................................................\ .................. 24 5
User’s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the pa rty responsible for compliance could void the users authority to operate the equipment. 2. Shielded interface cables and AC pow er cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not respons ible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to co rrect such interference. WARNING: To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only. PRECAUTIONS • Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. • Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the applianc e. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions. • Slots and openings in the back and bottom of th e cabinet are provided for ventilation. To ensure reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat re gister. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided. • The monitor should be operated only from the t ype of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. • Unplug the unit during a lighting storm or when it will not be used for long period of time. This will protect the monitor from damage due to power surges. • Do not overload power strips and extension cords. Overloading can result in fire or electric shock. • Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor. • Do not attempt to service the monitor by yourse lf; opening or removing covers can expose you to dangerous voltages and other haza rds. Please refer all servicing to qualified service personnel. • The wall socket shall be in stalled near the equipment and shall be easily accessible. 6
User’s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the sc reen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. • You may find slightly uneven brightness on the screen depending on the desktop pattern you use. • The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time. • Due to the nature of the LCD screen, an afteri mage of the previous screen may remain after switching the image, when the same image is disp layed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours. • If the screen suddenly flashes erratically or the backlighting fa ils, please contact your dealer or service center for repair. Do not atte mpt to repair the monitor yourself. Lamp Disposal LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTR ONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG. 7
User’s Manual BEFORE YOU OPERATE THE MONITOR FEATURES • 22” Wide screen TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions: 1680 X 1050 @60Hz • EPA ENERGY STAR® • GP Green Product • Ergonomic Design • Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The product package should include the following items: LCD Monitor Cables and User manual Power Cord Warranty Card Quick Start Guide User’s Manual Audio Cable (optional) VGA Cable DVI Cable (optional) 8
User’s Manual INSTALLATION INSTRUCTIONS INSTALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly. 4. Verify that the monitor is securely attached to the base by looking at the bottom of the base and making sure that the clips are fully engaged in the base. REMOVAL: 1. Flip over the monitor so that it is upside down. 2. Press the 2 clips on the base that holds the monitor in place. 3. Gently press and hold the 2 clips while pulli ng the base from the monitor unit they are unattached. POWER POWER SOURCE: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an Internal universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3. Connect the AC-power cord one end to your LC D monitor’s AC-input socket, the other end to wall-outlet. 9
User’s Manual SETTING THE MONITOR ON THE WALL DISSEMBLING THE STAND BASE: 1. Disconnect all the cables and cords from the Monitor to prevent breakage. 2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor. 3. Gently remove the stand base. (For reference only) WALL MOUNTING THE MONITOR: 1. Purchase a VESA compatible wall bracket: VESA 100X100, 4 holes, M4, 10mm, 8kg. 2. Locate your ideal Monitor position on the wall. 3. Fix the wall bracket firmly on the wall. 4. Secure the Monitor to the bracket using the 4 mount holes on the back and center of the Monitor. Note: • Please read the instructions of your specific wa ll bracket to properly wall mount the Monitor. • The pitch of the mounting holes is 10 0mm horizontally and 100mm vertically. • The screws type required is metric: M4, 10mm length. • The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of the stand base. *Installing the LCD Monitor requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves . Hanns.G bears no responsibility for improper mounting or mounting t hat results in accident or injury. You can ask a qualified service personnel about using an optional bracket to mount the Monitor to the wall. 10