Hamilton Beach Bl84 Manual

 
 
_________________________________ 
 
 
 
 
Water Dispenser 
 
Use & Care Manual 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
          Model 2202 
          Modelo 2202  

INTRODUCTION TO YOUR NEW HAMILTON BEACH 
WATER DISPENSER (model 2202) 
 
 
Congratulations, you have acquired a high quality Hamilton Beach Water Dispenser for 
bottled water.  This unit is packed with many extra features that you will find convenient to use.  
Multi-temperature capability allows you to enjoy a cool drink, hot beverage or sim\
ply cook your 
meals.  It will provide you with many years of trouble free use if you follow the safety 
precautions and operating instructions provided in this...

  
DANGER: CHILD ENTRAPMENT HAZARD. 
PROPERLY  DISPOSE OF THE WATER DISPENSER AS        
DIRECTED BELOW.  
 
Child entrapment and suffocation are not 
problems of the past.  Junked or abandoned 
dispensers with storage areas are still 
dangerous…even if they will sit for “just a 
few days.”  If you are getting rid of your old 
water dispenser, please follow these 
instructions to help prevent accidents.   
 
BEFORE YOU THROW AWAY YOUR 
OLD DISPENSER: 
 
• Take off the doors and discard 
separately. 
•...

 
PROPER INSTALLATION AND LOCATION 
 
1) Dispenser is for indoor use only.  Do 
not use outdoors. 
 
2) To prevent algae growth, find a 
location for your dispenser that is 
protected from direct sunlight and 
other sources of heat (e.g., radiators, 
baseboard heaters, cooking appliances, 
etc).  Do not use when relative 
humidity is greater than 90%. 
 
3) Do not install the dispenser where the 
surrounding air temperature will be 
above 100°F (38°C) or below 50°F 
(10°C).   
 
4) Place the dispenser on...

 
 
GETTING FAMILIAR WITH YOUR HAMILTON BEACH 
WATER DISPENSER  
 
 
Features: 
 
 
• Designed for in home or office use. 
 
• Front panel has three indicator lights, to see if the power, heating and\
 cooling are on. 
 
• Two power switches are located on the back of the dispenser.  One is for\
 cooling and one 
for heating. 
 
• Designed with distinctive thermal isolation technology, this dispenser can minimize 
thermal exchange between hot and cold water. 
 
• Both hot water tank and cooling tank are...

Parts Listing: 
 
5
 
                                               
1
2
Part No. Part Name Part No. Shown 
on Diagram 
Part No. Part Name Part No. Shown 
on Diagram 
HB-BS-1003 Bottle Supporter 1 HB-DT-1012 Drip Tray 9 
HB-SE-1004 Separator 2 HB-SD-1013 Storage Door 10 
HB-CT-1005 Cold Water Tank 2B HB-RS-1014 Removable Shelf 10B 
HB-GIL-1006 Green Indicator Light3 HB-HS-1015 Heating Switch 11 
HB-RIL-1007 Red Indicator Light 4 HB-CS-1016 Cooling Switch 12 
HB-BIL-1008 Blue Indicator Light 5 HB-TH-1017...

 
 
 
 
 
PREPARING, LOADING  & OPERATING  YOUR DISPENSER 
 
1) Make sure that the dispenser is not plugged into the electrical outlet a\
nd that both the 
hot and cold power switches (on the back of the dispenser) are set to \
the OFF position.   
 
2) Sanitize the dispenser water tanks prior to installing a full bottle of water for the first 
time (see “Proper Care and Cleaning of Dispenser”). 
 
3) The water bottle will have a cap.  The cap may have a stopper that is intended to be 
pushed into the...

5) The hot water temperature is preset to 190 degrees Fahrenheit (88 degrees Celsius).  
The HOT dispenser button is equipped with a child safeguard that reduces the risk of 
hot water being dispensed accidentally or by small children.   
 
WARNING:  BURN HAZARD.  The dispenser heats water to a temperature of 
approximately 190 ° F (88 ° C).  Water temperatures above 125 ° F (52 °C) can 
cause severe burns or death from scalding.  Children, the disabled and the elderly 
are at highest risk of being...

IMPORTANT:  Set both power switches (on the back of the dispenser) to the OFF position and 
unplug the water dispenser before cleaning. 
 
Use a solution of warm water and baking soda (approximately one tablespoon of baking soda to 
one quart of water).  This will clean and neutralize odors.  Then rinse\
 and wipe dry. 
 
Other parts of the storage compartment including door gaskets and plastic parts can be cleaned in 
the same manner. 
 
NOTICE:  To prevent damage to the water dispenser, the plastic...

 
 
 
 
 
WARNING:  BURN HAZARD.  The dispenser heats water to a temperature of 
approximately 190 ° F(88 ° C).  Water temperatures above 125 ° F (52 °C) can 
cause severe burns or death from scalding.  Children, the disabled and the elderly 
are at highest risk of being scalded. Children should be supervised by a\
n adult 
when using this product. 
 
 
After draining, replace the silicon stopper and cap. 
 
7) Rotate the bracket back into place and tighten screws. 
 
8) Make sure to install a full...