Haier Hwdc1200txveu Manual

							11USiN g th E AppLiAN cEUS iN g th E AppLiAN cE
US
iN g th E AppLiAN cE
p RO gRAM MODES
TEMPERATURE DEFAULT
P ROGRAM MAXIMUMPRESET 231RECOMMENDED L AUNDRYSPIN SPEED
1 ¬ Prewash 0 ° to 90 °C40 °C Heavy soiled laundry 1000 rpm
2 ¬ Cotton & Linen 0 ° to 90 °C40 °C
Cotton fabrics 1000 rpm
3 ¬ Synthetics 0 ° to 60 °C40 °C
Synthetic fabrics 800 rpm
4 ¬ Wool 0 ° to 40 °C0 °C
Wool fabrics 600 rpm
5 ¬ Quick wash 0 ° to 40 °C40 °C
Lightly soiled cotton, linen 
and synthetic fabrics 800 rpm
6 ¬ Wash 0 ° to 60 °C40 °C
 Cotton, linen and synthetic 
fabrics /
7 ¬ Rinse 0 °C40 °C
Cotton, linen and synthetic 
fabrics 800 rpm
8 ¬ Spin 0 °C0°C
Cotton, linen and synthetic 
fabrics 1000 rpm
9 ¬ Dry The laundry is completely dry when the cycle 
is complete Cotton, linen and synthetic 
fabrics/
10 ¬ Iron The laundry is completely dry when the cycle 
is complete Cotton, linen and synthetic 
fabrics/
11 ¬ Air wash Air refresh wash for small items that need 
a quick refresh (e .g  . school uniforms) Cotton, linen and synthetic 
fabrics /
pR
og RAm SELEC tIon
   Yes   No   Optional
2
131   Detergent compartment for prewash mode
2   Detergent compartment
3   Compartment for softener and 
     other additives  
						

							12USiN g th E AppLiAN cEUS iN g th E AppLiAN cE
Con Sumpt Ion A nD t ECH nICAL DA tA
c ONSUM ptiON t ABLE
The wash cycle times are intended as a guide only  . The actually used time may vary due to different water 
pressure, initial water temperature, etc  .  
pRog RAm En ER gY C on Sumpt IonWAtER C onSumpt IonWASHI ng tIm E
¬ Prewash 0 .637 kw/h 68 .3 l 133 min .
¬ Cotton & Linen 0 .482 kw/h 58 .4 l 133 min .
¬ Synthetics 0 .288 kw/h 34 .1 l 72 min .
¬ Wool 0 .225 kw/h 30 .8 l 60 min .
¬ Quick wash 0 .018 kw/h 30 .4 l 12 min .
¬ Wash 0 .341 kw/h 12 .1 l 61 min .
¬ Rinse 0 .038 kw/h 32 .7 l 24 min .
¬ Spin 0 .033 kw/h 0 l 11 min .
¬ Dry 4 .227 kw/h 111 .4 l 150 min .
¬ Iron 0 .888 kw/h 23 .5 l 60 min .
¬ Air wash 0 .446 kw/h 11 .76 l 30 min .
t Ech Nic AL DA tA
HWD-C1000 tXVE- u
HWD-C1000 tXVE mE-u HWD-C1200
tXVE-u
HWD-C1200 tXVE mE-u
Power source 220 - 240V~/50Hz 220 - 240V~/50Hz
Max  . working current (A) 10 10
Water pressure (MPa) 0 .03 
≤ P ≤1 0
 .03 ≤P ≤1
Washing power (W) 200 200
Spinning Power (W) 350 450
Spinning speed (r/min) 1000 120 0
Max  . load (kg) 6 6
Washing programs 11 11
Water heating power (W) 18 0 0 18 0 0
Dry heating power (W) 1000 1000
Dimensions (HxDxW mm) 850 x 590 x 595 850 x 590 x 595
Net weight (kg) 82 82
Washing noise (dB A) 54,3 54,3
Spinning noise (dB A) 71, 8 71, 8  
						

							13USiN g th E AppLiAN cEUS iN g th E AppLiAN cE
US
iN g th E AppLiAN cE
W ASHI ng & D RYIng
This Washer Dryer is for domestic use only  . Do not use it for purposes other than 
that for which it was designed . Follow the instructions given on the label of each 
garment and wash only machine-washable garments . Do not dry garment that 
has been cleaned with industrial chemicals .
pLEASE NO tE
pOWER SU ppLY
Connect the washer dryer to the power supply (220V to 240V~/50Hz)  .
W AtER c ONNE ctiON
Turn on the tap  . The water must be clean and clear  .
Note:  Before use, check for leakage in the joints between the tap and the inlet 
hose by turning on the tap  . Do not use the appliance until the hoses are properly 
fixed  .
pREp ARiN g th E LAUNDRY
¬  Sort out clothes according to fabric (cotton, synthetics, wool or silk) a\
nd to how  dirty they are .
¬  Separate white clothes from coloured ones . Wash them first by hand to check if  they fade or run .
¬  Empty pockets from objects like lighters and matches, keys, coins, etc . and  remove the harder decorative objects (e .g . brooches) .
¬  Garments without hems, underwear, finely woven textile such as fine curtains  are to be put into wash bag (it is better not to wash them in a washing\
 
machine) .
¬  Close zippers and hooks, make sure the buttons are sewn on tightly and p\
lace  small items such as socks, belts, bras, etc . in the wash bag .
¬  Unfold large pieces of fabric such as bed sheets, bedspreads, etc .
¬  Turn shirts inside out .   
						

							Intense
Speed u p Speed
T e
mp
Dela y Extra Rinse Highwash Rinse Hold Start/
Paus e Powe
rPrewas h
Cotto
n
Synt
-
hetic W ool
Comfort 40 Mixe
d
Drain
Spin
Rins
e
Hand
wash
Spor
t
Jeans
2
1
3
DelayE
xtra rinseD ryECOS tart/Paus e
Wash Rins eS pinD ryTemp
Speed
Prewas h
Cotton&Linen Synthetic
s
W
ool
Quickwas
h Wa
sh
Rinse
Spin
Dr y
Iron
Air wash
14US iN g th E AppLiAN cEUS iN g th E AppLiAN cE
LOAD iN g th E MA chiNE
Open the washer door, put in the laundry piece by piece  . Close the door tightly . 
¬  When first using the Washer Dryer, let it run empty without detergent for one  quick wash cycle to prevent the laundry from being tainted by oil or dirty water 
from the Washer Dryer  .
¬  Do not overload the Washer Dryer  .
S ELE ctiNg pRO gRAM
To get the best washing results, an appropriate washing program should be selected according 
to the laundry type  . Please turn the program knob clockwise to select the right program  .
S ELE ctiNg FUNcti ONAL
Select the required options  . (Refer to the "Control panel" pages 09 and 10)  . 
Otherwise keep all the buttons deselected  . If you wish to dry your laundry directly 
after the wash cycle is finished, please press the "Dry"-button  .
S
ELE ctiNg DE tER gENt
The washing efficiency and the performance is determined by the quality of detergent 
used . Special non-foaming detergent produces good washing results . Use specific 
detergents for synthetic and woollen goods . Do not use dry cleaning agents such as 
trichloroethylene and similar products . 
Note: Do not add more detergent than needed . Please follow the dosage 
recommendation on the detergent package .
A DD iN g DE tER gENt
Slide out the detergent drawer and put the required detergent and softening agent 
into the corresponding compartments  . Push back the drawer gently . (Refer to the 
instructions on the drawer)
c aution:
¬  For pre-washing program, detergent should be added to both compartments 1 and  2 . For other programs, do not add detergent to compartment 1  .
¬  If liquid detergent will be used, please fill in to the dosage cup and\
 place it directly  into the drum together with the laundry  .
¬  Do not overuse softener; otherwise, it will damage the artificial fibers  .
WASHIng& DRYI ng  
						

							DelayExtra rinseD ryECOS tart/Paus e
Wash Rins eS pinD ryTemp
Speed
Prewas h
Cotton&Linen Synthetic
s
W
ool
Quickwas
h Wa
sh
Rinse
Spin
Dr y
Iron
Air wash
DelayE xtra rinseD ryECOS tart/Paus e
Wash Rins eS pinD ryTemp
Speed
Prewas h
Cotton&Linen Synthetic
s
W
ool
Quickwas
h Wa
sh
Rinse
Spin
Dr y
Iron
Air wash
Dela yExtra rinse Dry ECO Start/Paus eW ash Rins eSpi n DryTemp
SpeedPrewas h
Cotton&Linen Synthetic
s
W
ool
Quickwas
h W a
sh
Rinse
Spin
Dr y
Iron
Air wash
DelayE xtra rinseD ryECOS tart/Paus e
Wash Rins eS pinD ryTemp
Speed
Prewas h
Cotton&Linen Synthetic
s
W
ool
Quickwas
h Wa
sh
Rinse
Spin
Dr y
Iron
Air wash
15US iN g th E AppLiAN cEUS iN g th E AppLiAN cE
US
iN g th E AppLiAN cE
W ASHI ng & D RYIng
WAS hiNg
Press the Start/Pause button  . The Washer Dryer will operate according to the 
pre-set programs  . The Washer Dryer will stop operation automatically when a 
washing cycle ends  . The "End" sign will appear on the display  . Open the washer 
door and take out the laundry  .
D RY iNg
If you wish to dry wet laundry, please select one of the drying programs by 
turning the program knob (Refer to the "Control panel" pages 09 and 10)  .
A Ft ER US iN g th E AppLiANc E
Turn off the water supply and unplug the power cord  . Open the washer door to 
prevent formation of moisture and odours  . Let the door open while not used .
S
Etti Ng S piN S pEED
Press and hold down the speed button until the desired speed is selected or the 
symbol "--" is selected for no spin  . See "Operational functions" on the "Control 
panel" pages (09 and 10) for selecting temperature and spin speed  . It is 
advisable to select the recommended value  . 
S
Etti Ng WAS hiNg t EMpERA tURE
Press and hold down the temperature button until the desired temperature is 
selected or the symbol 
- for no water heating  . 
t ip S FOR SA viNg ENER gY
1  .   Collect clothes for one full wash load  .
2  .   Avoid overloading the washer dryer  .
3  .   Pre-wash only heavily soiled clothes  .
4  .   Reduce the amount of detergent or choose the speed up wash programs for slightly soiled clothes  .
5  .   Choose a proper washing temperature . Modern detergents can wash with very good result already in lower temperature 
than 60°C . Only user higher temperature than 60° for heavily soiled laundry  .
6  .   Follow the dosage recommendation on the detergent package to avoid using\
 too much detergent .
7  .   Softening agent makes clothes feel softer and easier to iron  .
8 .  Adding fabric conditioner will also get rid of static condensation to make ironing easier  .    
						

							16USiN g th E AppLiAN cE
Bed sheet (single) Cotton Approximately 800g 
Blanket Wool Approximately 3000g 
Blended fabric clothes / Approximately 800g 
Jackets Cotton Approximately 800g 
Jeans / Approximately 800g 
Overalls Cotton Approximately 950g 
Pyjamas / Approximately 200g 
Shirts / Approximately 300g 
Socks Blended fabrics Approximately 50g 
T-Shirts Cotton Approximately 300g 
Underwear Blended fabrics Approximately 70g 
LOAD REFERENc
E
cotton: 6 kg Synthetic: 3 kgDelicate: 2 kgQuick: 3 kg
WASh LOAD
cARE ch ARt
Resistant material 
Delicate fabric
Washable at 95° C
Washable at 60° C
Washable at 40° C
Washable at 30° C
Hand wash
Dry clean only
Wool Seal Bleachable in cold water
Do not bleach
Iron at 200° C
Iron at 150° C
Iron at 100° C
Don't iron
Dry cleaning (any solvent)
Dry cleaning (pericloride)
Dry cleaning (aviation fuel)
Don't dry clean
Dry flat
Hung to dry
Dry on clothes hanger
Tumble dry, normal heat
Tumble dry, reduced heat
Don't tumble dry
The final part of a drying cycle is a cooling cycle without heat to ensure that the dried item\
s are left at a 
temperature that keeps them undamaged . 
pLEASE NO
tE
WASHI ng& DRYI ng  
						

							1.
3.
2.
2.
4.
1.
17US iN g th E AppLiAN cE MAi
NtENAN cE
C LEA nIng & CARE
A Ft ER WAS hiNg
Turn off the water supply and pull out electricity plug after 
each wash  . Open the washer dryer door to prevent formation 
of moisture and odours  . If the washing machine is left idle for 
a long period, drain the water in the machine and replace the 
drain hose  .
cLEAN iN g th E MA chiNE
Unplug the machine during cleaning and maintenance  . Use 
a soft cloth dampened with soap liquid to clean the machine 
case and rubber components  . Do not use organic chemicals or 
corrosive solvents  .
cLEAN
iN g th E DEtER gENt DRAWER
Clean the detergent distribution drawer regularly  .
Swing out the drawer, flush it clean with water and then 
replace it  .
cLEAN iN g th E FiL t ER
Clean the filter once a month:
1 . Open the bottom cover  . 
2 .Remove the filter by turning counterclockwise .
3 .Flush the filter clean with running water  .
4 .Replace the filter by turning clockwise and  
remount the cover  .
Caution:
1.The filter must be in place, or it may lead to leakage.
2.Place a container under the drain pump filter, to 
collect any excess water that may come out of the 
drain pump when the filter is removed.   
						

							Quickwash
Wool
Synthetics
Cotton&LinePr ewash Spin
Dr y
Ir on
Air washT e mp
Speed
WQuickwash
W
ool
Synthetics
Cotton&Line n
Pr ewash Rins
e
Spin
Dr y
Ir on
Air washT e mp
Speed
Dela y Extra
rins e Dr
y EcoTime Start/
Paus e W
ashStart/Sto pPower
2.
4.
5.
1.
3.
DelayExtra rinse Dry ECO Start/Paus eW ash Rins eSpi n DryTemp
SpeedPrewas h
Cotton&Linen Synthetic
s
W
ool
Quickwas
h W a
sh
Rinse
Spin
Dr y
Iron
Air wash
18MAi NtENAN cE
W AtER i NLEt AND i NLEt FiL t ER
To prevent blockage to the water supply by ingress of foreign 
substances, clean the water inlet and inlet filter regularly  .
MO viNg th E MA chiNE
If the machine is to be moved to a distant location, replace 
the transportation locks removed before installation to prevent 
damage as shown below  .
1  .   Remove the blanking plugs  .
2  .   Remove the back cover
3  .  Insert the synthetic stabilisers and the transportation bolts  .
4  .  Tighten the bolts with a spanner  .
5  .  Replace the back cover  .
L ON g p ERiODS OF D iSUSE
If the washer dryer is left idle for a long period, pull out the 
electrical plug and turn off the water supply  . Open the washer 
dryer door to prevent formation of moisture and odours  . Let 
the door open while not used  .
CLEAnIng & CARE  
						

							19MAiNtENAN cE
D IS pLAY C oDES
Co DES CAuSES SoL ut Ion S
E r r1 ¬ Washer door is not properly shut  .
_ Shut the door properly
Err2 ¬ Drainage error  . Water is not emptied  
within 4 minutes  ._ Clean the filter and check the drain hose for blockage  . 
Remove filter in case any water remains in the unit  .
Err3 ¬ Temperature sensor error  .
_ Please contact the Service Center  .
Err4 ¬ Heater error or laundry overload  . The set 
temperature is not reached within specified 
time  . (Appears at the end of a cycle)  ._ Reduce load and start washing again  ._ Please contact the Service Center .
Err5 ¬ Water level not met within 8 minutes  .
  _ Check the tap and the water pressure .
Err6 ¬ Dehumidification/heating error  ._ Please contact the Service Center  .
Err7 ¬ Motor overheat error  ._ Please contact the Service Center  .
Err8 ¬ Water overflow  ._ Please contact the Service Center  .
Err9 ¬ Error of the dryer temperature sensor  ._ Please contact the Service Center .
E r10 ¬ Error of the water level sensor  ._ Please contact the Service Center  .
E r12 ¬ Error of the dryer water level sensor  . 
 
_ Check whether clothes are dry or not and whether there is 
water still in the drum  . If so allow excess humidity to 
escape from the appliance and try the drying cycle again  .
E r13 ¬ Dryer heater error  .
_ Please contact the Service Center  .
Unb ¬ Laundry is unevenly distributed  ._ Redistribute laundry to balance the drum  .
EUAr ¬ Communication error  ._ Please contact the Service Center  .
1:16 ¬ Status information: remaining program time is 1 hour and 16 minutes  .
0:01 ¬ Status information: remaining program time is 1 minute  .
60°C ¬ Status information: Wash temperature is 60°C  .
- -°C ¬ No heat (cold wash)  .
0 ¬ No spin .
800 ¬ Status information: Spin speed 800 rpm  .
L- -1 ¬ Manually selected code when laundry weight is less than 1kg  .
L- - A ¬ Manually selected code when drum is nearly full  .
End ¬ Program is finished  . 
D
iS p LAY c ODES AND S pEci AL FUNcti ONS
¬ c ontrol panel lock function: Press the "Delay" and the "Start/Pause" buttons simultaneously for 3 seconds after 
starting a program . It can no longer be changed by operating buttons or knobs . The washing machine emits an audible 
signal while the control panel is locked . To unlock press the "Delay" and "Start/Pause" buttons again for 3 seconds .
¬ p ower-off memory function: In case of abrupt power failure or the need to cut off the power during a program 
cycle, the present settings will be saved and the preset operation will resume when the power is on again  .
¬ 
t o cancel a program or select a new program and options during the wash cycles: 
    Press the "Start/Pause" button, then switch off the power and the program is automatically cancelled  . Turn the program selector again to choose another program .   
						

							20MAiNtENAN cE
tR oub LE  SH ootIng
pR ob LEmS poSSIbLE CA uSES poSSIbLE S oLut Ion S
Washer Dryer fails to 
operate  . ¬ Poor connection to the power supply
 .¬ Power failure .¬ The washer door is not properly closed  .¬ Machine has not been switched on .
_  Check connection to the power supply  ._  Check the power supply ._  Make sure the washer door is closed properly  ._  Make sure the machine is switched on .
Washer Dryer cannot be 
filled with water  .
  ¬ 
Water tap is not turned on
 .¬ Water pressure is less than 0,03 MPa  .¬ The inlet hose is kinked .¬ Water supply failure .¬ The program knob is not properly set  .¬ The washer door is not properly closed  .
_  Turn water tap on ._  Check water pressure  ._  Check the inlet hose for bends  ._  Ensure the water supply ._  Make sure the program knob is properly set  ._  Make sure the washer door is closed properly  .
Machine is continually 
filling and draining  .¬ The height of the drain hose is below 80 cm
 .
¬
The drain hose is in water  .
_ Make sure the height of the drain hose is within 80 - 100 cm  ._ Make sure the drain hose is not in water .
Drainage failure .¬ Drain hose is blocked  .
¬ Drain hose end is more than 100 cm   above the floor level  . 
¬ 
The filter is blocked .
_  Unblock the drain hose  ._  Make sure the drain hose end is less  
than 100 cm above floor level  .
_  Unblock the filter .
Strong vibration while 
spinning . ¬ Not all transportation bolts have been 
removed  .
¬ Washer dryer is located on an  
uneven surface or is not level  .
¬ Machine is overloaded .
_  Check if all transportation bolts have been removed  ._  Make sure the washer dryer is on  
an even surface and levelled  .
_  Reduce amount of laundry in the drum  .
Operation stops before 
completing wash cycle  .¬ Water or electricity failure
 .
_  Check the power supply .
Operation stops for a 
period of time  .¬ Washer dryer gives an error message
 .
_  Wait until cycle is complete_  See display codes on previous page .
Excessive foam in the 
drum . ¬ The detergent is not a low-foaming  
 type or for manual wash  .
¬ Excessive use of detergent  .
_  Check if your detergent is appropriate  ._  Reduce amount of detergent used .
Automatic adjustment of the 
washing time . ¬ The washing program duration will be adjusted according to 
the initial water temperature . _ This is normal and doesn't affect the  
functionality
 .
Spinning fails ¬ Unbalance of the laundry
_ 
Add clothes or run a spinning program again . 
tROUBLES hOOtiNg
In the unlikely event of difficulties with your appliance please follow the troubleshooting guide below  . If the problem persists, 
contact the retailer if the machine is still within the guarantee period  . If the appliance is out of guarantee, contact an 
approved service agent on 0845 025 3025  . If an error code is displayed, please refer to the error code guide below  .