Haier Hwdc1200txveu Manual

							QuickwashWash
W o o l
Synthetics
Cotton&Linen
Prewash Rinse
Spin
Dry
Iron
Air washTemp
Speed
Delay Extra
rinse Wash+Dry 
EcoStart/
PauseQuickwash
W o o l
Synthetics
Cotton&Linen
Prewash Rinse
Spin
Dry
Iron
Air washTemp
Speed
Wash
SpinDry
WashRinse
SENSOR DRY
WASHER DRYER
USER MANUAL
HWD–C1000TXVE ME-U
HWD–C1200TXVE ME-U
HWD–C1000TXVE-U
HWD–C1200TXVE-U             
						

							BEFORE USE
¬ Important Safety Information
   . .03
¬ Components   .  .  .  .  .  .  .  .  .  .  .  .  . 04
¬ Preparation   . . . . . . . . . . . . . . 05
¬ Safety instructions   . . . . . . . . .06
¬ Installation   . . . . . . . . . . . . . . . 07
¬ Control Panel   .  .  .  .  .  .  .  .  .  .  .  . 09U
SiN g th E AppLiANc E
¬ Operational functions   . . . . . . . .10
¬ Program selection   .  .  .  .  .  .  .  .  . .11
¬ Consumption and   technical data   .  .  .  .  .  .  .  .  .  .  .  .  .12
¬ Washing & drying   .  .  .  .  .  .  .  .  . .13 M
AiNt ENANc E
¬ Cleaning & Care   .  .  .  .  .  .  .  .  .  . .17
¬ Display codes   .  .  .  .  .  .  .  .  .  .  .  .  .19
¬ Trouble shooting   .  .  .  .  .  .  .  .  .  . .20
O pERA tiONAL FUN ctiONS
For your safety, any instructions in this manual with this "Warning" sign 
must be followed strictly.
 
  
Ye s
 
   No
 
   Optional
04 - 09
10 - 15 16 - 20
LEgEND    
						

							ELEctRicAL cONNEctiON (UK ONLY) 
WAtERMiNAL MARKED N.
thE BROWN WiRE MUSt BE cONNEctED tO thE tERMiNAL 
MARKED L.
YOU MUSt MAKE SURE thE LEAD iS FiRMLY SEcURED UNDER 
thE cORD cLAMp.
WA tER cONNEctiON
thE pRODUct ShOULD BE cONNEctED tO thE WA tER MAiN 
USiNg NEW hOSE SEtS, OLD hOSE SEtS ShOULD NOt BE RE 
USED.
thE WA tER pRESSURE MUSt NOt BE LESS thAN 0.03Mp A.
cONNEct tO thE WA tER MAiN USiNg A St ANDARD 3/4 iNch 
thREADED t Ap OUtLEt.
iF YOU ARE DiSpOSiNg OF AN OLD AppLiANcE, DiSABLE thE 
DOOR LOcK tO A vOiD ENtRApMENt OF chiLDREN WhEN 
pLAYiNg.  
Do not use a multiple socket extension cord . A separate earthed socket is required which shall be accessible at all times .
If the mains cord becomes damaged, it must be replaced by the manufactur\
er, its service agent or similarly qualified person 
with a lead of the same type and rating to avoid a hazard .
Never remove the plug from the socket by pulling on the cord, always gra\
sp the plug .
The door may get hot during use, do not touch it and keep children away \
whilst the machine is operating .
Never open the detergent drawer while the machine is running .Hot water and detergent might be ejected .
When installing the product, make sure the mains cord is not trapped or \
twisted .
WARNINGS:
THIS APPLIANCE IS INTENDED FOR DOMESTIC USE ONLY, COMMERCIAL OR ANY OTHER
USE MAY INVALIDATE THE WARRANTY AND MIGHT BE DANGEROUS .
Never touch or operate the machine with wet hands or when bare footed .
Do not put the machine on a carpet that can block the ventilation slots \
on the bottom of the unit . 
Do not install this machine outdoors or in a damp place or expose it to \
rain .
Do not install this product near a heat source or in direct sunlight . 
Do not place any object on the machine when it is operating .   
This appliance must be earthed .
If you are disposing of an old appliance,disable the door lock to avoid \
entrapment of children when playing and cut off the 
mains cord close to the machine .
The appliance must be connected to a 220-240 volts 50 cycle AC supply by\
 means of a three pin socket, suitably earthed and 
should be protected by a 13 amp fuse in the plug . 
The appliance is supplied with a standard 13 amp 3-pin plug fitted wit\
h a 13-amp fuse . Should the fuse require replacement, 
it must be replaced with a fuse rated at 13 amps and approved to BS1362 .
If the mains plug is unsuitable for the socket outlet in your home or is\
 removed for any other reason,then the cut off plug 
should be disposed of safely, do not insert the cut off plug into a mains outlet to prevent the hazard of electric\
 shock . Remove 
the fuse before disposal .
There is a danger of electric shock if the cut off plug is inserted into any 13-amp socket outlet .
How to wire a 13 amp plug .  (UK Only)
The wires in the mains lead on this appliance are coloured in accordance\
 with the following code:
Green and Yellow - Earth          Blue – Neutral            Brown – Live
As the colours may not correspond with the markings identifying the terminals in your plug proceed as follows .
The green and yellow wire must be connected to the terminal in the plug which is marked with the
letter E or with the earth symbol        or coloured green and yellow  .
The blue wire must be connected to the terminal marked N .
The brown wire must be connected to the terminal marked L .
You must make sure the lead is firmly secured under the cord clamp .
WATER CONNECTION
The product should be connected to the water main using new hose sets, o\
ld hose sets should not be re used .
The water pressure must not be less than 0 .03MPa .
Connect to the water main using a standard 3/4 inch threaded tap outlet .
Impo RtA nt S AfE t Y Info Rm AtIon 
03
B
EFORE USE  
						

							04BEFORE USE
Acc ESSOR iES
Check the accessories and literature in accordance with 
this list: 1x Bottom cover(include the feather felt)
1x Drain hose bracket
1x Service manual
C ompon Ent S
th ANKS FOR p URchASiN g A hA iER p RODUct
p lease read these instructions carefully before using this appliance  . The instructions contain important information which 
will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance  .
Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance  . If you 
sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the 
new owner can become familiar with the appliance and safety warnings  .
1x Inlet hose assembly 3x Blanking plugs  
						

							S1S2
S3 T3
T1
 
T2
Quickwash Wash
W o o l
Synthetics
Cotton&Linen
Prewash Rinse
Spin
Dry
Iron
Air washTemp
Speed
Delay Extra
rinse Wash+Dry 
EcoStart/
PauseQuickwash
W o o l
Synthetics
Cotton&Linen
Prewash Rinse
Spin
Dry
Iron
Air washTemp
Speed
Wash
SpinDry
WashRinse
SENSOR DRY
05BEFORE USE
pREp ARiN g t hE MA chiNE
Remove all the packing materials to prevent unsteadiness, including the 
polystyrene base  . 
Upon opening the package, water drops may be seen on the plastic bag and the 
porthole  . This is normal phenomenon resulting from water tests in the factory  . 
D ES cR ipti ON
Power switch
Program knob
Door handle
Display
Porthole
Washer door
Detergent distribution drawer
Filter cover
p R E pA R At Io n
This diagram may be slightly different from the layout of the washer 
dryer you have just purchased due to technical improvements  .Drain hose
Water inlet valve
Power cord
Back cover
Back cover screws
Transportation bolts
Transom                                                                                   
						

							06BEFORE USE
  DO ...
   . . . ensure you connect the appliance directly to a 
domestic mains water supply  .
   . . . make sure that the plug is accessible
 .
   . . . keep surrounding areas free form accumulation of lint, 
dust and dirt  .
   . . . keep away from heat sources and direct sun light to  prevent plastic and rubber components from aging  .
   . . .
 make sure that the power cord is not caught under or in 
the appliance and avoid damage to the power cord  .
   . . . ensure that the appliance is not installed behind a 
lockable door, a sliding door or a door with a hinge on the 
opposite side to that of the appliance so that a full opening 
of the appliance door is restricted  .
   . . .
 make sure that children or infirm persons do not play 
with the packing materials  .
D UR iN g D AiLY USE OF th E AppL iAN cE DO NO t ...
   . . . touch or use the appliance when barefoot or with wet or 
damp hands or feet  .
   . . . use flammable detergent or dry cleaning agent  .
   . . . use any flammable sprays in close vicinity to the appliance  .
   . . . remove or insert the plug in the presence of flammable gas  .
   . . . install the appliance outdoors in a damp place, or in an 
area which may be prone to water leaks such as under 
or near a sink unit  . In the event of a water leak allow the 
machine to dry naturally  .
   . . . place the washer dryer directly on a carpet, or close to a 
wall or furniture  .
   . . . connect the appliance to the power supply until 
installation is complete  . 
   . . . use an appliance with missing parts  .
   . . . dry unwashed garments in the washer dryer  .
  DO NO t ...
   . . . touch the washer dryer door during the washing or drying 
process - it gets hot! 
   . . . hot wash or dry foam rubber or sponge-like materials,  shower caps or waterproof textiles  .
    . . . open the detergent distribution drawer during the wash cycle  .
   . . . force the washer dryer door open . The door is fitted with 
a self-lock device and will not open until 2-3 minutes after 
the washing machine stops  .
   . . . open the washer dryer door if the water level is visibly 
over the porthole  .
 
   . . . attempt to repair the appliance yourself  . Contact the 
manufacturer or their approved service agent  .
   . . . stop the washer dryer before the end of the drying cycle 
unless all items are quickly removed and spread out so that 
the heat is dissipated .
B
EFORE SW itchiNg th E AppL iAN cE ON FOR th E FiRS t ti ME
 DO ...
   . . .
 make sure that items soiled with cooking oil, acetone, 
alcohol, petrol, kerosene, spot removers, turpentine, 
waxes, wax removers or similar substances have been 
washed with hot water and an extra amount of detergent 
before being dried  .
   . . . in case the power cord is damaged, let it be replaced by 
the manufacturer, his service agent or other accordingly 
qualified persons  .
   . . . unplug the appliance before carrying out any 
maintenance or repair  .
   . . . hold the plug and not the electric cable when 
unplugging the power supply  .
   . . . ensure that the appliance is not used by persons with 
reduced physical, sensory or mental capabilities, lack 
of experience and knowledge without supervision or 
instruction by a person responsible for their safety  .
   . . . make sure not to place heavy objects or sources of 
heat or damp on top of the appliance  .
SA fE t Y I nSt Ru CtIon S  
						

							fi g .1fig.2
3.
1.2.
4.
fig.3
07BEFORE USE
A DjUS tiNg th E BOttOM c OvER
Before removing the transportation bolts, please fix the 
bottom cover to the bottom of the washer dryer  . Lay down 
the machine (fig  . 1 .), screw off the feet and adjust the 
bottom cover with the four holes corresponding the screw 
holes of the feet  . Then screw the feet back on through the 
cover and fix it thus securely to the bottom of the machine 
(fig  . 2 .)  . 
It keeps out the dampness and reduces the noise  .
Di SMANt LE thE tRANS pOR tA ti ON BOL tS
The transportation bolts are designed for clamping anti-
vibration components inside of the washer dryer during the 
transportation process  . 
1  .   Remove the back cover  .
2  .   Remove the three bolts on the rear side and take out 
the synthetic stabilisers from within the machine  .
3  .   Replace the back cover  .
4  .   Fill the holes left by the bolts with blanking plugs  .
Note: 
1.When you replace the back cover,the convexity must face to outside, 
and you have to insert the back cover from the two gaps as shown 
in fig.3.
2.Keep the transportation bolts and synthetic stabilisers 
in a safe place for later use.
ADjUS tiNg th E WAS hER DRYER
There are adjustable feet under the bottom of the washer dryer  . Before use, they 
should be adjusted so that the machine is level  . This will minimise vibrations and 
thus noise during use  . It will also reduce wear and tear  . We recommend using a 
spirit level to level the appliance  .
InS tALLA tIon                                  
						

							1.
80 - 100 cm
2.
1.2.
08BEFORE USE
iNLE t hOSE
1  .   Connect the nut on the inlet hose to the connector on 
the water valve  .
2  .   Apply inlet hose to a water tab with cold, fresh water  .
Note: Use the hose-set supplied with the 
appliance. Old hose-sets should not be reused.
D RA iN h OSE
1  .   Use the drain hose bracket to keep the end of the 
drain hose retained and prevent the outflow of 
water  . Don't extend the length of the drain hose; 
if an extended hose is required, please consult a 
serviceman  .
2  .   The height of the drainage outlet must be 80-100 
cm  . Fix the drain hose to the clip at the back of the 
washing machine to prevent it from dropping off  . 
  Note:  The drain hose should not be submerged in 
water and should be securely fixed and leak-free  . If the 
drain hose is placed on the ground or if the pipe is at 
a height of less than 80cm, the washing machine will 
continuously drain while being filled (self-siphoning)  .
cONNE ctiNg t O th E pOWER SU ppLY
Before connecting to the power supply, check:
¬
  The socket is adequate for the maximum power of the Washer Dryer 
  (For safety, fuses in the power circuit should be rated for no less than 15A)  .
¬
  The voltage should meet the requirement  .
¬
  The power outlet should be capable of accepting the Washer Dryer plug  .
¬
  Connect the machine to an earthed socket outlet  .
InS tALLA tIon  
						

							DelayExtra rinse Wash+DryECOStart/Pause
Wash Rinse SpinDryTemp
Speed
   
Prewash Cotton&Linen Synthetics Wool Quickwash Wash
Rinse Spin
Dry
Iron
Air wash
SENSOR DRY
09B EFORE USE
A ¬ Power switch_ Press this button to turn the machine on  . Press it again to switch it off . 
B ¬ Program knob
_ Turn the dial clockwise or anti-clockwise to select the required program  . (Refer to 
program modes on page 10)  .
OpERA tiONAL FUN ctiONS
A
  
Power button
B   Program selection dial
c   Detergent distribution drawer
D  Spin speed setting button
E   Display
F  Wash status indicator 
g  Start/Pause button
h   Eco button
i   Dry button
j  Extra rinse button
K  Delay button
L   Wash temperature button
A
c
jE
K F
hL
g
D
B
i
Cont Ro L pA nEL
See the explanations of the controls on the opposite page .
Wash and Dry(1st 8 settings with green LED’s)
Press the ON OFF button then turn the wash program knob to select the required program .
Press the DRY button(before the wash cycle starts)to make the washer enter dry(mode 9)after the wash cycle has finished .
Press the START/PAUSE button to start the Wash/Dry cycle .
NOTE
Pressing the DRY button a second time(Before the wash cycle starts)will turn off the Auto dryer  .
Wash Only(1st 8 settings with green LED’s)
Press the ON OFF button then turn the wash program knob to select the required program 1-8 .
Press the START/PAUSE button to start the wash cycle .
Dry Only(Last 3 settings with Amber LED’s)
Press the ON OFF button then turn the wash program knob to select the required program 9-11 .
Press the START/PAUSE button to start the wash cycle .  
						

							10USiN g th E AppLiAN cEUS iN g th E AppLiAN cE
D ¬ Spin speed button_ Press this button to select the desired speed  .
E ¬ Display
_ Information such as remaining wash time, temperature and speed setting and error 
messages are shown here  .
F ¬ Wash status indicator
_ This light shows the stage of the cycle in the selected program
G ¬ Start/Pause button
_ After the Washer Dryer is connected to the power socket and a program is selected, 
press this button to start operation  . Press this button again during  operation to 
pause the program  . The display screen will start blinking and the machine will be
 
paused . Press the button again and the program will continue  .
H ¬ Eco button
_ Economy wash  . This function automatically adjusts water consumption, wash time 
and heating time  . The wash load range is: 
  Prewash: 1kg-6kg;                 Cotton:   1kg-6kg;                 Synthetic:  1kg-3kg; 
Quick wash:1kg-3kg;              Wash:   1kg-6kg;                   Rinse: 1kg-6kg; 
Spin: 1kg-6kg;                        Dry:1kg-3kg 
I ¬ Dry button
_ Press this button, the corresponding light will go on and the appliance will dry the 
laundry after the last spin cycle  .
J ¬
 Extra rinse button_ Press this button, the overhead indicator will go on  . An additional rinse operation 
will be activated  .
Note:Select this function when programe 1-6 or 9 is selected  .
K ¬
 Delay button_ Press the button repeatedly before starting the program to enter the time you 
want the machine to be finished in, the start will delay from 0  .5 to 24 hours in 30-
minute intervals  . After the delay is selected, press the Start/Pause button to start 
countdown (the time is displayed on the screen until the programme ends)  . Note: 
The delay time must be longer than the programme time, otherwise the Washer 
Dryer  will start the wash programme immediately  . 
L ¬ Wash temperature 
button
_ Touch this button and the wash temperature will be displayed on the screen  . Select 
a suitable temperature according to the type of laundry  . 
OpERA tiONAL FUN ctiONS
C ¬ Detergent distribution 
drawer_ Instructions are printed on the front of the drawer  .  
Open the drawer, three compartments can be seen: 
 
c ompartment 1:  Pre-wash detergent 
 
c ompartment 2:  Standard washing - extra-fast washing 
 
c ompartment 3:  Softener, conditioning agent,perfume, etc  .2
13
Cont Ro L p An EL