Haier Hw60-1201-u Manual

AutomAtic Drum W Ashing mAchine
USER MANUAL
hW80-1401B- u      hW70-1401B- u   
h W70-1401 s-u      h W70-1401- u
h W70-1201B- u      hW70-1201 s-u
h W70-1201- u        hW60-1401B- u   
h W60-1401 s-u      h W60-1401- u
h W60-1201B- u      hW60-1201 s-u
h W60-1201- u              

tABle of contents
IMPORTANT DISPOSAL INSTRUCTIONS 
                                    
As a responsible retailer we care about the environment.  As such we urg\
e you to follow the correct 
disposal procedure for your product and packaging materials. 
This will help conserve natural recourses and ensure that it is recycled in  a manner that pr\
otects health 
and the environment. 
You must dispose of this product and its packaging according to local law\
s and regulations.  Because 
this product...

1x Inlet hose assembly1x d
rain hose bracket
1x User manual 4x Blanking plugs
Delay
components
ThANkS fOR PURChASINg A hAIER PRODUCT
Please read these instructions carefully before using this appliance. The instructions contain important information which will help you 
get the best out of the appliance and ensure safe and proper installatio\
n, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for\
 the safe and proper use of the appliance. 
If you sell the...

T1T2
T3
S1
S2 S4
S3 T4
 
Control panel
door handle
Work top
Washer door
Start/Pause
detergent distribution drawer
Filter cover
PREPARINg ThE MAChINE
Remove all the packing materials to prevent unsteadiness, including the \
polystyrene base. Upon 
opening the package, water drops may be seen on the plastic bag and the \
porthole. This is normal 
phenomenon resulting from water tests in the factory. 
DESCRIPTION
This diagram may be slightly different from the layout of the washing ma\
chine you have just...

sAfety instructions
  dO ...
 ... Make sure that the transport bolt are removed. 
 ... Use a separate earthed socket for the power supply.
 ... Make sure that the plug is accessible.
 ... Hold the plug and not the electric cable when 
unplugging the power supply.
  ... Make sure that the fuses in the power circuit are rated 
for 15A.
  ... Keep away from heat sources and direct sun light to 
prevent plastic and rubber components from aging.
  ... Make sure that the power cord is not caught under or 
in...

3.
1.2 .
4.
DISMANTLE ThE TRANSPORTATION BOLTS
The transportation bolts are designed for clamping anti-vibration components 
inside of the washing machine during the transportation process. 
Remove the back cover.
1. 
Remove the four bolts on the rear side and take out the synthetic 
2. 
stabilisers from within the machine.
Replace the back cover.
3. 
Fill the holes left by the bolts with blanking plugs.
4. 
Note: 
1.when you replace the back cover,the convexity must face 
to outside, and you have to...

1.2 .
1.
8 0 - 1 0 0cm
2.
INLET hOSE
1. Connect the nut on the inlet hose to the connector on the water 
valve.
2. Apply inlet hose to a water tap with cold, fresh water.
Note: Use the hose-set supplied with the appliance. Old 
hose-sets should not be reused.
DRAIN hOSE
1. Use the drain hose bracket to keep the end of the drain hose retained\
 
and prevent the outflow of water. don't extend the length of the drain 
hose; if an extended hose is required, please consult a serviceman.
2. The height of...

ABCDEFGHKLJ
OPERATIONAL fUNCTIONS
control pAnel
A  Program knob
B   Power Switch
C   Start/Pause button
D   Spinning Speed Setting button
E   Washing temperature button
f   d elay Button  g   d
etergent distribution drawer
h   d isplay
I                   
Intense button
J                  Extra rinse button  
k                Rinse hold       
A ¬ Program knob _By turning the knob clockwise/counterclockwise, the required program can be se\
lected. There are 
10 programs available. After a program is...

F¬delay Button  Touch this button lightly, the washing machine will start operation after a period of time 
and the corresponding indicator will go on. The range is 0.5-24 hours; each touch o\
f this 
button increases a half hour. After the button is set, press the Start/Pause button to start 
countdown of the set time (the time is displayed on the screen until th\
e program ends).
Note:The delay time must be longer than the program time;otherwise,the 
washing machine will start  the wash program...

2
131   Detergent compartment for prewash mode
2   Detergent compartment
3   Compartment for softener and 
     other additives
progrAm selection
PROgRAM MODES
          Preset  spin speed
Program Maximum   Preset  2  3  1 Recommended    Laundry
hW80-1401B- u      hW70-1401B- u    hW70-1401 s-u      
h W70-1401- u        hW70-1201B- u     hW70-1201 s-u
h W70-1201- u        hW60-1401B- u     hW60-1401 s-u      
h W60-1401- u        hW60-1201B- u     hW60-1201 s-u
h W60-1201-u
 
1 ¬  - - to 90 °C 40°C...