GoPro Lcd Touch User Guide

11
/ Changing Camera Modes
You can use the LCD Touch BacPac to change camera modes and settings on 
your GoPro.TO CHANGE CAMER A MODE S   
ON HERO4: TO CHANGE CAMER A MODE S ON 
HERO3+ AND HERO3:
Swipe left to display all of the modes 
and then tap the desired mode.Tap the camera mode icon in the upper 
left corner, and then tap the desired 
camera mode. 

12
Video and photo files that are saved on your memor y card appear as thumbnail 
images on the BacPac screen.
TO PLAY BACK VIDEOS AND PHOTOS ON HERO4:
1.  Swipe left, and then tap Playback .
2.  Swipe to scroll through the thumbnails.   
Note: For photo series (Burst, Time Lapse, Night Lapse and Continuous photos), the thumbnail displays the first 
photo in the series.
3. Tap a video or photo to open it in full-screen view.
4.  For video, tap [ 
 ].
5.  To return to the thumbnails screen, tap [ 
 ].
6....

13
TO PLAY BACK VIDEOS AND PHOTOS ON HERO3+ AND HERO3:
1.  Tap the camera mode icon in the upper left hand corner, and then   
tap  Playback .
2.  Tap a thumbnail to open the video or photo in full screen view.
3.  To navigate, tap the icons, as needed.   
Note: For photo series (Burst, Time Lapse, Night Lapse and Continuous photos), the thumbnail displays the first 
photo in the series. 
4. For video, tap [  ].
5.  To return to the thumbnails screen, tap [ 
 ]. 
6.  To exit, tap [ 
 ]. 

14
Customize your camera’s video and photo capture options using the  
settings menu.
TO CHANGE THE SE T TINGS ON HERO4 :
1.  Swipe left to display all of the modes and then tap the desired mode.
2.  From the bottom of the screen, swipe up to open the settings menu for   
that mode.
3.  Swipe up or down to scroll through the settings for that mode.
4.  Tap and swipe, as needed, to select a new option for the setting.
5.  To exit the settings menu, swipe down from the top of the screen,  
tap Exit, or...

15
TO CHANGE THE SE T TINGS ON HERO3+ OR HERO3:1.  Tap the camera mode icon in the upper left corner, and then select [ 
 ]   
to enter the Settings menu.
2.  Tap an option to select it.
3.  To navigate through previous and next options, tap [ 
 ] and [  ].
4.  To navigate through each sub-menu, tap [ 
 ] and [  ].
5.  Tap an item to select it.
6.  To exit, tap [ 
 ]. 

16
Attaching the LCD Touch BacPac to your GoPro requires the use of a deeper 
backdoor when used with the housing. Three different backdoors are supplied 
with the LCD Touch BacPac:•  Touch BacPac Backdoor —Enables you to use the touch screen functionality 
of your LCD Touch BacPac, and delivers waterproof protection to 10’ (3m).
•  Standard BacPac Backdoor —Makes your camera waterproof to 131’ (40m). 
Use when shooting under water or in wet, damp, or dir ty conditions.
•  Skeleton BacPac Backdoor —Not...

17
TO SWAP OUT THE BACKDOOR 
Step 1
Open the backdoor 
of the housing so it 
hangs downward. Step 2
Gently pull 
downward on the 
backdoor until it 
snaps free from 
the hinge.Step 3
Line up the 
replacement 
backdoor to the 
hinge opening.
Step 4
Push upward on 
the backdoor until 
it clicks into place. 

18
Listed below are some of the icons that appear on the LCD Touch BacPac. For 
details about these features, see your camera’s user manual.
/ LCD Touch BacPac Icons
Video
Photo
Multi-Shot/Burst
Time Lapse
Playback
Wireless
Batter y
Spot Meter
Protune
Low Light
Thumbnails
Slideshow
Slow Motion  (in Video playback for HERO3+ and HERO3)
Volume 

19
WARNING: Failure to follow these safety instructions could result in fire, 
electric shock or other injur y or damage to the LCD Touch BacPac or other 
proper t y.
HANDLING 
The LCD Touch BacPac contains sensitive components. Do not drop, disassemble,  
open, crush, bend, deform, puncture, shred, microwave, incinerate or paint the 
LCD Touch BacPac. Do not inser t foreign objects into the por t opening on the   
LCD Touch BacPac. Do not use the LCD Touch BacPac if it has been damaged—
for example, if...

20
KEEPING THE LCD SCREEN CLE AN 
Clean the LCD screen immediately if it comes in contact with any contaminant 
that may cause staining, such as ink, dye, makeup, dir t, food, oil or lotion. To clean 
the LCD screen, use a soft, slightly damp, lint-free cloth. Do not allow moisture to 
enter por t openings. Do not use window cleaners, household cleaners, aerosol 
sprays, solvents, alcohol, ammonia or abrasives to clean the LCD Touch BacPac.
AVOID WATER AND WE T LOCATIONS  
Do not use the LCD Touch BacPac...