GoPro Hero Plus User Manual

4041
/ Setup Mode
DATE/TIME
Your camera’s date and time are automatically set when you connect 
your camera to the GoPro App or GoPro Studio software. This setting 
lets you manually set the date and time. 
DELETE
This setting lets you delete the most recently captured video, photo, 
Burst sequence, or Time Lapse sequence. You also have the option 
to delete all files and reformat the memor y card. Deleting all files is 
useful after you transfer your files to your computer and want to make 
room on your...

4243
/ Important Messages
FILE REPAIR ICON
If your last video file was corrupted during recording, 
the camera displays the File Repair icon while it tries to 
repair the file. When this process is finished, press any 
button to continue using the camera.
TEMPERATURE ICON
The Temperature icon appears on the camera status 
screen when the camera becomes too hot and needs   
to cool down. Simply let it sit and cool before attempting 
to use it again. Your camera was designed to identif y 
conditions of...

4445
/ Camera Housing
PREVENTING WATER DAMAGE TO YOUR CAMERA 
The rubber seal that lines the camera housing forms a waterproof barrier 
that protects your HERO+ in wet and under water conditions.
Keep the camera housing’s rubber seal clean. A single hair or grain   
of sand can cause a leak and damage your camera.
After ever y use in salt water, rinse the outside of the camera housing 
with fresh water and dr y. Not doing this can eventually cause 
corrosion of the hinge pin and salt buildup in the seal,...

4647
/ Using the Mounts
MOUNTING GUIDELINES 
Follow these guidelines when attaching mounts:
•  Attach the adhesive mounts at least 24 hours prior to use.
•  Adhesive mounts must be mounted only on smooth sur faces. 
Porous or textured sur faces do not enable a proper bond. When 
applying the mount, firmly press it into place and ensure full 
contact over the entire sur face.
•  Apply adhesive mounts to clean sur faces only. Wax, oil, dir t or 
other debris reduce adhesion, which can result in a weak bond...

4849
/ Batter y
Your HERO+ camera, batter y, and housing are integrated. You cannot 
remove the camera from the housing, or remove the batter y from  
the camera.
The batter y icon displayed in the camera status screen blinks 
when the batter y drops below 10%. If the batter y reaches 0% while 
recording, the camera saves the file and powers off.
MA XIMIZING BATTERY LIFE  
To maximize batter y life, close the GoPro App or turn off wireless. 
Extreme cold temperatures can decrease battery life. To...

5051
/ Troubleshooting
MY GOPRO WON'T POWER ON 
Make sure your GoPro is charged. To charge your camera, use the 
included USB cable and a computer. You can also use the GoPro Wall 
or Auto Charger.
MY GOPRO WON'T RESPOND WHEN I PRESS A BUTTON  
Press and hold the 
Power/Mode  button for eight seconds to reset your 
camera. This reset saves all of your content and settings, and powers 
off your camera.
MY PLAYBACK IS CHOPPY  
Choppy video is typically not a problem with the file. If your footage...

52
/ Regulatory Information/ Trademarks
To see the complete list of countr y cer tifications, refer to the Impor tant 
Product + Safety Information included with your camera.
GoPro, HERO, the GoPro logo, the GoPro Be a HERO logo, BacPac, 
Protune, SuperView, and Wear It. Mount It. Love It. are trademarks or 
registered trademarks of GoPro, Inc. in the U.S. and internationally. 
Other names and marks are the proper ty of their respective owners.
GoPro is dedicated to providing the best possible ser vice....