GoPro Dive Housing User Guide
Have a look at the manual GoPro Dive Housing User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 54 GoPro manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
USER GUIDE Dive Housing ULTRA DURABLE AND WATERPROOF TO 197’(60M).
2 / What’s Included DIVE HOUSING Designed for deep sea diving and extreme activities. STANDARD BACKDOOR + STANDARD BACPAC BACKDOOR Waterproof backdoors for use with or without a BacPac™ accessory. SKELETON BACKDOOR + SKELETON BACPAC BACKDOOR Enable optimal audio capture during low-speed activities, and access to an attached LCD Touch BacPac (sold separately). NOT waterproof. HOUSING LENS COVER Protects the housing lens from scratches, dirt and debris.
3 / Opening the Dive Housing Step 2 Using your right hand, place your thumb to the left side of the arrow and index finger just below the latch.Step 3 Pinch your fingers together, sliding the arrow to the right. Step 4 Use your fingertips to pull the latch upright and unlock it from the housing. Step 1 Grip the housing with your left hand.
4 / Closing the Dive Housing Step 2 Close the housing backdoor. Step 3 Hook the latch into the groove on the backdoor. Step 4 Press down on the latch until it locks into place. Step 1 Place your GoPro inside the housing.
5 / Important Safety + Handling Information WARNING: Failure to properly care for your Dive Housing can result in leaks that may damage or destroy your camera. Your warranty does not cover water damage resulting from user error. CLEANING THE LENS Clean the housing lens immediately after it comes into contact with anyt\ hing that may cause a stain, including ink, makeup, dirt, food or lotion. To clean the lens, gently wipe it with a soft, damp cloth. Do not use window cleaners, household cleaners, solvents, alcohol, ammonia or anything abrasive to clean the lens. PRE VENTING WATER DAMAGE TO YOUR CAMER A It’s very important to keep the housing’s rubber seal clean. A single hair or grain of sand can cause the housing to leak and damage your camera. To clean the seal, remove it from the housing, rinse it in fresh water and shake dry (drying with a cloth may cause lint to compromise the seal). After using the housing in salt water, always remember to rinse it with fresh water to prevent corrosion.
130-06139-000 REVBPlease Recycle Learn more about GoPro products at gopro.com