Motorola Gm340 User Manual

9
English
GETTING STARTED
GETTING STARTEDTURNING THE RADIO ON OR OFF
ADJUSTING THE VOLUME
Tu r n t h eOn/Off/Volume Controlknob
clockwise to increase the volume, or
counterclockwise to decrease the volume.RADIO ON INDICATION
At power up the radio performs a self test
routine. On completion of a successful self test
the radio will emit a high pitched tone (Radio
self test ok) and the green led will light. If the
radio fails the self test, an alternating high/low
pitched tone (Radio self test fail) will...

10
English
GETTING STARTED
Sending a Call
1.Select the desired radio channel.
2.Press thePTTbutton and speak clearly
into the microphone.Your mouth should be
2.5 to 5 cm away from the microphone.
3.When transmitting, the red indicator will
light continuously.
4.Release thePTTbutton to listen.
Your radio may be configured for ‘Transmit
Inhibit’ under certain conditions (e.g. when the
channel is in use by others) in which case, the
channel busy tone will sound when you press
the PTT or call button to...

11
English
RADIO CALLS
RADIO CALLSSELECTIVE CALLS
Making a Selective Call
You can make a selective call to a particular
radio, known as an individual call, or a group of
radios, known as a group call.
To m a k e a S e l e c t i v e C a l l :
1.Press the PTT or Call Button (depending
on the way your radio has been pro-
grammed by your dealer), to set up the
call.
2.Wait until the conversation has been set
up, which means you are authorised to
use the system.
3.Talk with your mouth 2.5 - 5cm from the...

12
English
RADIO CALLS
EMERGENCY CALL
Your radio can be programmed to give you a
one-button quick access to call a particular
radio or centre (predefined by your dealer) in
emergency situations. This is theEmergency
Call.
When you make an Emergency call, your radio
goes into an Emergency state, which can be
programmed to:
 continually receive speech,
 the radio can receive and transmit.
1.Press theEmergencybutton to initiate an
Emergency call.
2.Emergency can be stopped by:
 Switching the...

13
English
FEATURES
FEATURESPUBLIC ADDRESS MODE
The Public Address mode allows you to use
your radio audio as a public address system.
You can use your radio microphone as normal
and the audio is routed through the radio to an
external loudspeaker fitted to your vehicle.
A switch, external to your radio, switches the
audio from your radio to the external
loudspeaker.
This feature is programmed and fitted by your
dealer.To access the Public Address system:
1Turn external switch to thePAposition.
2Press...

14
English
FEATURES
CAR RADIO MUTE
The Car Radio Mute feature automatically
mutes your in-car audio entertainment system
to allow you to hear incoming calls or to stop
audio interference when you are making a call.
This feature may be programmed into your
radio by your dealer. 

15
English
UTILITIES
UTILITIESThe utilities described below are programmed
into your radio by your dealer and are
accessible via a programmable button. 

16
English
UTILITIES
VOICE RECORDER
You can record and playback incoming calls or
make a memo using the voice recorder feature,
which allows up to 2 minutes of recording.
Torecordan incoming call:
1.Press and hold the Record/Playback but-
ton, the Voice Storage Recording alert
sounds momentarily.
2.Record the call or part of the call.
3.The Voice Storage Warning alert
sounds when the
memory is nearly full.
4.The Voice Storage Full alert
sounds when the
memory is full and recording ceases.
5.Release the...

17
English
UTILITIES
SCAN
You can monitor several channels in order to
receive any call that is transmitted on any of
these channels. Sixteen channels can be
programmed into each scan list. Each channel
cansharethesamescanlistorhavedifferent
scan lists assigned to them.
Once the radio’s scan operation is activated
and the radio detects a call coming through a
channel in its scan list, it switches to that
channel for you to receive the call.
STARTING OR STOPPING SCAN
You can start or stop a scan operation...

18
English
UTILITIES
DELETING A NUISANCE CHANNEL
If a channel continually generates unwanted calls/
noise (a “nuisance” channel), you can temporarily
remove it from the scan list by performing a
Nuisance Channel Deleteoperation:
1.While the radio is on the Nuisance Chan-
nel, press and hold theNuisance Delete
button until you hear the scan star t alert
tone.
2.Release theNuisance Deletebutton.Note:You cannot perform a Nuisance Channel Delete
on a priority channel or if there is only one...