Gigabyte H110mm2 Manual

 &Uncore Ratio Allows you to set the CPU Uncore ratio. The adjustable range is dependent on the CPU being used.
 &Uncore Frequency Displays the current CPU Uncore frequency.
 &CPU Flex Ratio Override Enables or disables the CPU Flex Ratio. The maximum CPU clock ratio will be based on the CPU Flex Ratio	Settings value if CPU Clock Ratio is set to Auto. (Default: Disabled)
 &CPU	Flex	Ratio	Settings Allows you to set the CPU Flex Ratio. The adjustable range may vary by CPU.
 &Intel(R)	Turbo	Boost	Technology...

 &C8 State Support (Note 1)
 Allows you to determine whether to let the CPU enter C8 mode in system h\
alt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to d\
ecrease power consumption. The C8 state is a more enhanced power-saving state than C6/C7. Auto	lets	 the	BIOS	 automatically	 configure	this setting. (Default: Auto)
 &Package	C	State	Limit	(Note 1)
 Allows you to specify the C-state limit for the processor. Auto	lets	 the	BIOS	 automatically...

 &Memory Frequency (MHz)	 The	first	memory	 frequency	 value	is	the	 normal	 operating	 frequency	 of	the	 memory	 being	used;	the	second	is the memory frequency that is automatically adjusted according to the \
System Memory Multiplier settings.
 `Advanced	Memory	Settings
 &Extreme	Memory	Profile	(X.M.P.)	(Note ), System Memory Multiplier, Memory Ref Clock, 
Memory Odd Ratio (100/133 or 200/266), Memory Frequency(MHz)  The settings above are synchronous to those under the same items on the \
Advanced...

 `Advanced	Voltage	Settings
 `Advanced	Power	Settings
 &CPU Vcore Loadline Calibration	 Allows	you	to	configure	 Load-Line	 Calibration	 for	the	 CPU	 Vcore	 voltage.	 Selecting	 a	higher	 level	keeps	the CPU Vcore voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically	configure	this	setting	and	sets	the	voltage	following	Intel's	specifications.	(Default:	 Auto)
 &VAXG Loadline Calibration	 Allows	you	to	configure	 Load-Line	 Calibration	 for	the	 CPU...

 `Smart	Fan	5	Settings
 &Monitor Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN)
 &Fan Speed Control Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal      Allows the fan to run at different speeds according to the temperature. You can adjust the fan speed with System Information Viewer based on your system requirements. (Default) Silent     Allows the fan to run at slow speeds. Manual...

2-3 System
This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the system time.
 &Access Level Displays the current access level depending on the type of password protection used. (If no password is set, the default will display as Administrator.) The Administrator level allows you to make changes to all BIOS settings; the User level only allows you to make changes to certain\
 BIOS settings but not all....

2-4 BIOS
 &Bootup NumLock State Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On)
 &Security Option	 Specifies	 whether	a	 password	 is	required	 every	time	the	system	 boots,	or	only	 when	 you	enter 	BIOS 	Setup.	After	 configuring	 this	item,	 set	the	 password(s)	 under	the	Administrator Password/User Password item. Setup      A password is only required for entering the BIOS Setup program. System   A password is required for booting the...

 &SATA Support All Sata Devices    All SATA devices are functional in the operating system and during the POST. (Default) Last Boot HDD Only   Except for the previous boot drive, all SATA devices are disabled before the OS boot process completes.	 This	item	is	configurable	only	when	Fast Boot is set to Enabled or Ultra Fast.
 &VGA Support Allows you to select which type of operating system to boot. Auto        Enables legacy option ROM only. EFI Driver     Enables EFI option ROM....

 &Storage	Boot	Option	Control Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller. Do not launch    Disables option ROM. Legacy     Enables legacy option ROM only. (Default) UEFI       Enables UEFI option ROM only.	 This	item	is	configurable	only	when	CSM Support is set to Enabled.
 &Other PCI devices Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other than the LAN, storage device, and...

2-5 Peripherals
 &Initial Display Output	 Specifies	the	first	 initiation	 of	the	 monitor	 display	from	the	installed	 PCI	Express	 graphics	 card	or	the	 onboard 	graphics. IGFX	 	 	 Sets	the	onboard	graphics	as	the	first	display. PCIe	1	Slot		 Sets	the	graphics	card	on	the	PCIEX16	slot	as	the	first	display.	(Default)
 &Ambient	LED Enables or disables the onboard audio LED function. (Default: On)
 &Intel	Platform	Trust	Technology	(PTT) Enables or disables Intel® PTT Technology. (Default:...