Gigabyte H110mm2 Manual

							 &Uncore Ratio Allows you to set the CPU Uncore ratio. The adjustable range is dependent on the CPU being used.
 &Uncore Frequency Displays the current CPU Uncore frequency.
 &CPU Flex Ratio Override Enables or disables the CPU Flex Ratio. The maximum CPU clock ratio will be based on the CPU Flex Ratio	Settings value if CPU Clock Ratio is set to Auto. (Default: Disabled)
 &CPU	Flex	Ratio	Settings Allows you to set the CPU Flex Ratio. The adjustable range may vary by CPU.
 &Intel(R)	Turbo	Boost	Technology	(Note)
 Allows you to determine whether to enable the Intel® CPU Turbo Boost technology. Auto lets the BIOS automatically	configure	this	setting.	(Default:	 Auto)
 &Turbo Ratio (Note)
 Allows you to set the CPU Turbo ratios for different number of active cores. Auto sets the CPU Turbo ratios according	to	the	CPU	specifications.	(Default:	 Auto)
 &Power Limit TDP (Watts) / Power Limit Time	 Allows	you	to	set	 the	 power	 limit	for	CPU	 Turbo	 mode	and	how	 long	 it	takes	 to	operate	 at	the	 specified	power	 limit.	If	the	 specified	 value	is	exceeded,	 the	CPU	 will	automatically	 reduce	the	core	 frequency	 in	order to reduce the power. Auto	sets	the	power	limit	according	to	the	CPU	specifications.	(Default:	 Auto)
 &Core Current Limit (Amps)	 Allows	you	to	set	 a	current	 limit	for	CPU 	Turbo	 mode.	 When	the	CPU	 current	 exceeds	 the	specified	 current	limit, the CPU will automatically reduce the core frequency in order to reduce the current. Auto sets the power	limit	according	to	the	CPU	specifications.	(Default:	 Auto)
 &No.	of	CPU	Cores	Enabled	(Note)
 Allows you to select the number of CPU cores to enable in an Intel® multi-core CPU (the number of CPU cores may vary by CPU). Auto	lets	the	BIOS	automatically	configure	this	setting.	(Default:	 Auto)
 &Hyper-Threading	Technology	(Note)
 Allows you to determine whether to enable multi-threading technology when using an Intel® CPU that supports this function. This feature only works for operating systems that support multi-process\
or mode. Auto	lets	the	BIOS	automatically	configure	this	setting.	(Default:	 Auto)
 &Intel(R)	Speed	Shift	Technology	(Intel® Speed	Shift	Technology)	(Note)
 Enables or disables Intel® Speed Shift Technology. Enabling this feature allows the processor to ramp up its operating frequency more quickly and then improves the system respon\
siveness. (Default: Disabled)
 &CPU	Enhanced	Halt	(C1E)	(Note)
  Enables or disables Intel® CPU Enhanced Halt (C1E) function, a CPU power-saving function in syst\
em halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. Auto	lets	the	BIOS	automatically	configure	this	setting.	(Default:	 Auto)
 &C3 State Support (Note)
 Allows you to determine whether to let the CPU enter C3 mode in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to d\
ecrease power consumption. The C3 state is a more enhanced power-saving state than C1. Auto	lets	 the	BIOS	 automatically	 configure	this setting. (Default: Auto)
 &C6/C7 State Support (Note)
 Allows you to determine whether to let the CPU enter C6/C7 mode in syste\
m halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to d\
ecrease power consumption. The C6/C7 state is a more enhanced power-saving state than C3. Auto	lets	 the	BIOS	 automatically	 configure	this setting. (Default: Auto)
(Note)  This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit Intel's website.
- 21 -  
						

							 &C8 State Support (Note 1)
 Allows you to determine whether to let the CPU enter C8 mode in system h\
alt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to d\
ecrease power consumption. The C8 state is a more enhanced power-saving state than C6/C7. Auto	lets	 the	BIOS	 automatically	 configure	this setting. (Default: Auto)
 &Package	C	State	Limit	(Note 1)
 Allows you to specify the C-state limit for the processor. Auto	lets	 the	BIOS	 automatically	 configure	this	setting. (Default: Auto)
 &CPU Thermal Monitor (Note 1)
 Enables or disables Intel® Thermal Monitor function, a CPU overheating protection function. When en\
abled, the CPU core frequency and voltage will be reduced when the CPU is overheated. Auto lets the BIOS automatically	configure	this	setting.	(Default:	 Auto)
 &CPU	EIST	Function	(Note 1)
 Enables or disables Enhanced Intel® Speed Step Technology (EIST). Depending on CPU loading, Intel® EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production. Auto	lets	 the	BIOS	 automatically	 configure	this	setting.	(Default: Auto)
 &Voltage	Optimization  Allows you to determine whether to enable voltage optimization to reduce power consumption. (Default: Disabled)
 &RSR Allows you to determine whether to automatically lower the CPU turbo ratio if the CPU voltage/temperature is too high. (Default: Enabled)
 &Hardware Prefetcher Allows you to determine whether to enable hardware prefetcher to prefetc\
h data and instructions from the memory into the cache. (Default: Enabled)
 &Adjacent Cache Line Prefetch Allows you to determine whether to enable the adjacent cache line prefetch mechanism that lets the processor retrieve the requested cache line as well as the subsequent ca\
che line. (Default: Enabled)
 &Extreme	Memory	Profile	(X.M.P.)	(Note 2)
 Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when enabled. Disabled    Disables this function. (Default) Profile1	 	 Uses	Profile	1	settings. Profile2	(Note 2)	 Uses	Profile	2	settings.
 &System Memory Multiplier Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD data. (Default: Auto)
 &Memory Ref Clock Allows you to manually adjust the memory reference clock. (Default: Auto)
 &Memory Odd Ratio (100/133 or 200/266) Enabled allows Qclk to run in odd frequency. (Default: Auto)
(Note  1)  This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit Intel's website.(Note 2) This item is present only when you install a CPU and a memory module that support this feature.
- 22 -  
						

							 &Memory Frequency (MHz)	 The	first	memory	 frequency	 value	is	the	 normal	 operating	 frequency	 of	the	 memory	 being	used;	the	second	is the memory frequency that is automatically adjusted according to the \
System Memory Multiplier settings.
 `Advanced	Memory	Settings
 &Extreme	Memory	Profile	(X.M.P.)	(Note ), System Memory Multiplier, Memory Ref Clock, 
Memory Odd Ratio (100/133 or 200/266), Memory Frequency(MHz)  The settings above are synchronous to those under the same items on the \
Advanced	 Frequency	 Settings menu.
 &Memory Boot Mode (Note)
 Provides memory detection and training methods. Auto	 	 	 	 Lets	the	BIOS	automatically	configure	this	setting.	(Default) Normal        The BIOS automatically performs memory training. Please note that if the system becomes unstable or unbootable, try to clear the CMOS values and reset t\
he board to default values. (Refer to the introductions of the battery/clear CMOS jumper in Chapter 1 for how to clear the CMOS values.) Enable	Fast	Boot		
Skip	memory	 detection 	and	 training	 in	some	 specific	 criteria	for	faster	 memory	boot. Disable Fast Boot  Detect and train memory at every single boot.
 &Memory	Enhancement	Settings Provides several memory performance enhancement settings: Normal (basic performance), Relax OC, Enhanced Stability, and Enhanced Performance. (Default: Normal)
 &Memory	Timing	Mode Manual and Advanced Manual allows the Channel	 Interleaving, Rank	Interleaving, and memory timing settings	below	to	be	configurable.	Options	are:	 Auto	(default),	Manual,	Advanced	Manual.
 &Profile	DDR	Voltage When using a non-XMP memory module or Extreme	 Memory	Profile	(X.M.P.) is set to Disabled, the value is	displayed	 according	to	 your	 memory	 specification.	 When	Extreme	Memory	Profile	(X.M.P.) is set to Profile1 or Profile2, the value is displayed according to the SPD data on the XMP memory.
 &Memory Multiplier Tweaker Provides different levels of memory auto-tuning. (Default: Auto)
 &Channel	Interleaving Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability. Auto lets the BIOS automatically	configure	this	setting.	(Default:	 Auto)
 &Rank	Interleaving Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically configure	this	setting.	(Default:	 Auto)
 `Channel	A/B	Memory	Sub	TimingsThis sub-menu provides memory timing settings for each channel of memory\
. The respective timing setting screens	are	configurable	 only	when	Memory	 Timing	Mode is set to Manual or Advanced Manual. Note: Your system may become unstable or fail to boot after you make changes on the\
 memory timings. If this occurs, please reset the board to default values by loading optimized defaults o\
r clearing the CMOS values.
(Note)  This item is present only when you install a CPU and a memory module that support this feature.
- 23 -  
						

							 `Advanced	Voltage	Settings
 `Advanced	Power	Settings
 &CPU Vcore Loadline Calibration	 Allows	you	to	configure	 Load-Line	 Calibration	 for	the	 CPU	 Vcore	 voltage.	 Selecting	 a	higher	 level	keeps	the CPU Vcore voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically	configure	this	setting	and	sets	the	voltage	following	Intel's	specifications.	(Default:	 Auto)
 &VAXG Loadline Calibration	 Allows	you	to	configure	 Load-Line	 Calibration	 for	the	 CPU	 VAXG	 voltage.	 Selecting	 a	higher	 level	keeps	the CPU VAXG voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically	configure	this	setting	and	sets	the	voltage	following	Intel's	specifications.	(Default:	 Auto)
 `CPU	Core	Voltage	ControlThis section provides CPU voltage control options.
 `DRAM	Voltage	ControlThis section provides memory voltage control options.
 `PC Health Status
 &Reset Case Open Status Disabled   Keeps or clears the record of previous chassis intrusion status. (Defau\
lt) Enabled     Clears the record of previous chassis intrusion status and the Case Open	field	 will	show "No" at next boot.
 &Case Open Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header.	 If	the	 system	 chassis	 cover	is	removed,	 this	field	 will	show	 "Yes",	 otherwise	 it	will	 show	 "No".	To	clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to the CMOS, and then restart your system.
 &	
CPU	Vcore/CPU	VCCSA/DRAM	Channel	 A/B	Voltage/+3.3V/+5V/+12V/CPU	VAXG Displays the current system voltages.
 `Miscellaneous	Settings
 &Max Link Speed Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation mode	 is	subject	 to	the	 hardware	 specification 	of	 each	 slot.	Auto	lets	 the	BIOS	 automatically	 configure	this	setting. (Default: Auto)
 &3DMark01	Enhancement Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
- 24 -  
						

							 `Smart	Fan	5	Settings
 &Monitor Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN)
 &Fan Speed Control Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal      Allows the fan to run at different speeds according to the temperature. You can adjust the fan speed with System Information Viewer based on your system requirements. (Default) Silent     Allows the fan to run at slow speeds. Manual   Allows you to control the fan speed in the curve graph. Full Speed   Allows the fan to run at full speeds.
 &Temperature Displays the current temperature of the selected target area.
 &Fan Speed Displays current fan speeds.
 &Temperature	Warning Sets the warning threshold for temperature. When temperature exceeds the\
 threshold, BIOS will emit warning sound. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF.
 &Fan	Fail	Warning Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan connection when this occurs. (Default: Disabled)
- 25 -  
						

							2-3 System
This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the system time.
 &Access Level Displays the current access level depending on the type of password protection used. (If no password is set, the default will display as Administrator.) The Administrator level allows you to make changes to all BIOS settings; the User level only allows you to make changes to certain\
 BIOS settings but not all.
 &System	Language Selects the default language used by the BIOS.
 &System Date Sets the system date. The date format is week (read-only), month, date, and year. Use  to switch between	 the	Month,	 Date,	and	Year	 fields	 and	use	the		or		 key	to	set	 the	 desired	value.
 &System Time  Sets the system time. The time format is hour, minute, and second. For example, 1 p.m. is 13:00:00. Use 	 to	switch	 between	 the	Hour,	 Minute,	 and	Second	 fields	and	use	the		or		key to set the desired value.
- 26 -  
						

							2-4 BIOS
 &Bootup NumLock State Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On)
 &Security Option	 Specifies	 whether	a	 password	 is	required	 every	time	the	system	 boots,	or	only	 when	 you	enter 	BIOS 	Setup.	After	 configuring	 this	item,	 set	the	 password(s)	 under	the	Administrator Password/User Password item. Setup      A password is only required for entering the BIOS Setup program. System   A password is required for booting the system and for entering the BIOS S\
etup program. (Default)
 &Full Screen LOGO Show Allows you to determine whether to display the GIGABYTE Logo at system s\
tartup. Disabled skips the GIGABYTE Logo when the system starts up. (Default: Enabled)
 &Boot Option Priorities	 Specifies	 the	overall	 boot	order	 from	the	available	 devices.	Removable	 storage	devices	 that	support	 GPT	format	 will	be	prefixed	 with	"UEFI:"	 string	on	the	 boot	 device	 list.	To	boot	 from	 an	operating	 system	that	supports	GPT 	partitioning,	select	the	device	prefixed	with	"UEFI:"	string. Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select the	optical	drive	that	contains	the	Windows	7	64-bit	installation	disk	and	is	prefixed	with	"UEFI:"	string.
 & 
Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities	 Specifies	 the	boot	 order	 for	a	specific	 device	type,	such	as	hard	 drives,	 optical	drives,	 floppy	disk	drives,	and devices that support Boot from LAN function, etc. Press  on this item to enter the submenu that presents the devices of the same type that are connected. This item is present only if at least one device for this type is installed.
 &Fast Boot  Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup speed. (Default: Disabled)
- 27 -  
						

							 &SATA Support All Sata Devices    All SATA devices are functional in the operating system and during the POST. (Default) Last Boot HDD Only   Except for the previous boot drive, all SATA devices are disabled before the OS boot process completes.	 This	item	is	configurable	only	when	Fast Boot is set to Enabled or Ultra Fast.
 &VGA Support Allows you to select which type of operating system to boot. Auto        Enables legacy option ROM only. EFI Driver     Enables EFI option ROM. (Default)	 This	item	is	configurable	only	when	Fast Boot is set to Enabled or Ultra Fast.
 &USB Support Disabled     All USB devices are disabled before the OS boot process completes. Full Initial     All USB devices are functional in the operating system and during the POST. Partial Initial     Part of the USB devices are disabled before the OS boot process completes. (Default)	 This	item	is	configurable	 only	when	Fast Boot is set to Enabled. This function is disabled when Fast Boot is set to Ultra Fast.
 &PS2 Devices Support Disabled      All PS/2 devices are disabled before the OS boot process completes. Enabled       All PS/2 devices are functional in the operating system and during the POST. (Default)	 This	item	is	configurable	 only	when	Fast Boot is set to Enabled. This function is disabled when Fast Boot is set to Ultra Fast.
 &NetWork Stack Driver Support Disabled      Disables booting from the network. (Default) Enabled     Enables booting from the network.	 This	item	is	configurable	only	when	Fast Boot is set to Enabled or Ultra Fast.
 &Next Boot After AC Power Loss Normal Boot   Enables normal bootup upon the return of the AC power. (Default) Fast Boot     Keeps the Fast Boot settings upon the return of the AC power.	 This	item	is	configurable	only	when	Fast Boot is set to Enabled or Ultra Fast.
 &Mouse Speed Allows you to set the mouse cursor movement speed. (Default: 1 X)
 &Windows 8/10 Features Allows you to select the operating system to be installed. (Default: Other OS)
 &CSM Support Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process. Enabled      Enables UEFI CSM. (Default) Disabled     Disables UEFI CSM and supports UEFI BIOS boot process only.	 This	item	is	configurable	 only	when	Windows 8/10 Features is set to Windows 8/10 or Windows 8/10 WHQL.
 &LAN	PXE	Boot	Option	ROM  Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled)	 This	item	is	configurable	only	when	CSM Support is set to Enabled.
- 28 -  
						

							 &Storage	Boot	Option	Control Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller. Do not launch    Disables option ROM. Legacy     Enables legacy option ROM only. (Default) UEFI       Enables UEFI option ROM only.	 This	item	is	configurable	only	when	CSM Support is set to Enabled.
 &Other PCI devices Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other than the LAN, storage device, and graphics controllers. Do not launch    Disables option ROM. Legacy     Enables legacy option ROM only. UEFI       Enables UEFI option ROM only. (Default)	 This	item	is	configurable	only	when	CSM Support is set to Enabled.
 &Administrator Password	 Allows	you	to	configure	 an	administrator	 password.	Press		 on	this	 item,	 type	the	password,	 and	then	press	 .	 You	will	be	requested	 to	confirm	 the	password.	 Type	the	password	 again	and	press	. You must enter the administrator password (or user password) at system startup and when entering BIOS Setup. Differing from the user password, the administrator password allows you to \
make changes to all BIOS settings.
 &User Password	 Allows	 you	to	configure	 a	user	 password.	 Press		 on	this	 item,	 type	the	password,	 and	then	 press	.	 You	will	be	requested	 to	confirm	 the	password.	 Type	the	password	 again	and	press	 .	You must enter the administrator password (or user password) at system \
startup and when entering BIOS Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.
 To cancel the password, press  on the password item and when reque\
sted for the password, enter the	correct	 one	first.	 When	 prompted	 for	a	new	 password,	 press		 without	entering	 any	password.	Press		again	when	prompted	to	confirm.	 NOTE:	Before	setting	the	User	Password,	be	sure	to	set	the	 Administrator	Password	first.
- 29 -  
						

							2-5 Peripherals
 &Initial Display Output	 Specifies	the	first	 initiation	 of	the	 monitor	 display	from	the	installed	 PCI	Express	 graphics	 card	or	the	 onboard 	graphics. IGFX	 	 	 Sets	the	onboard	graphics	as	the	first	display. PCIe	1	Slot		 Sets	the	graphics	card	on	the	PCIEX16	slot	as	the	first	display.	(Default)
 &Ambient	LED Enables or disables the onboard audio LED function. (Default: On)
 &Intel	Platform	Trust	Technology	(PTT) Enables or disables Intel® PTT Technology. (Default: Disabled)
 `OffBoard	SATA 	Controller	Configuration Displays information on your M.2 PCIe SSD if installed.
 `Trusted	Computing Enables or disables Trusted Platform Module (TPM).
 `Super	IO	Configuration
 &Serial Port Enables or disables the onboard serial port. (Default: Enabled)
 `Intel(R)	Bios	Guard	Technology Enables or disables the Intel® BIOS Guard feature, which protects the BIOS from malicious attacks.
 `Network	Stack	Configuration
 &Network Stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disabled)
- 30 -