Gigabyte Gaming 5 Manual

 &LAN PXE Boot Option ROM Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled)	 This	item	is	configurable	only	when	CSM Support is set to Enabled.
 &Storage Boot Option Control Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller. Do not launch    Disables option ROM. Legacy     Enables legacy option ROM only. (Default) UEFI       Enables UEFI option ROM only.	 This	item	is	configurable...

2-5 Peripherals
 &Initial Display Output	 Specifies	the	first	 initiation	 of	the	 monitor	 display	from	the	installed	 PCI	Express	 graphics	 card	or	the	 onboard 	graphics. IGFX	 	 	 Sets	the	onboard	graphics	as	the	first	display. PCIe	1	Slot		 Sets	the	graphics	card	on	the	PCIEX16	slot	as	the	first	display.	(Default) PCIe	2	Slot		 Sets	the	graphics	card	on	the	PCIEX4	slot	as	the	first	display.
 &LED_C Connect Enables or disables the lights of the RGB (RGBW) LED strip connected t\
o the...

 `OffBoard	SATA	Controller	Configuration	 Displays information on your M.2 PCIe SSD if installed.
 `Trusted Computing Enables or disables Trusted Platform Module (TPM).
 `Intel(R) Bios Guard Technology Enables or disables the Intel® BIOS Guard feature, which protects the BIOS from malicious attacks.
 `Network	Stack	Configuration
 &Network Stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default:...

 &Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Enabled)
 &Mass Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed.
 `SATA 	And	RST	Configuration
 &SATA Controller(s)   Enables or disables the integrated SATA controllers. (Default:...

 &VT-d (Note)
 Enables or disables Intel® Virtualization Technology for Directed I/O. (Default: Enabled)
 &Internal Graphics Enables or disables the onboard graphics function. (Default: Auto)
 &DVMT Pre-Allocated Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 32M)
 &DVMT Total Gfx Mem Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX. (Default: 256M)
 &Audio Controller Enables or disables the onboard audio function....

 &Platform Power Management Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)
 &PEG ASPM	 Allows	 you	to	configure	 the	ASPM	 mode	for	the	 device	 connected	 to	the	 CPU	 PEG	 bus.	This	 item	is	configurable	only	when	Platform Power Management is set to Enabled. (Default: Enabled)
 &PCH ASPM	 Allows	 you	to	configure	 the	ASPM	 mode	for	the	 device	 connected	 to	Chipset's	 PCI	Express	 bus.	This	 item	is	configurable	only	when	Platform Power Management is...

 &Power On Password Set the password when Power On By Keyboard is set to Password. Press  on this item and set a password with up to 5 characters and then press  to accept. To turn on the system, enter the password and press . Note: To cancel the password, press  on this item. When prompted for the\
 password, press  again without entering the password to clear the password settings.
 &Power On By Mouse Allows the system to be turned on by a PS/2 mouse wake-up event. Note: To use this function, you need...

2-8 Save & Exit
 &Save & Exit Setup Press  on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press  to return to the BIOS Setup Main Menu.
 &Exit Without Saving Press  on this item and select Yes. This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS. Select No or press  to return to the BIOS Setup Main Menu.
 &Load Optimized Defaults Press  on this item and select Yes to load the optimal BIOS default settings. The...

 •Before	installing	 the	drivers,	 first	install	 the	operating	 system.	(The	following	 instructions	 use	Windows 10 as the example operating system.) •After installing the operating system, insert the motherboard driver disk into your optical drive. Click on the message "Tap to choose what happens with this disc" on the top-right corner of the screen and select "Run Run.exe." (Or go to My Computer, double-click the optical drive and execute the Run.exe program.)
Drivers Installation...

Regulatory Statements
Regulatory NoticesThis document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose.Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at the time of printing. GIGABYTE cannot, however, assume any responsibility for errors or omissions in this text. Also note that the information in this document is subject to change...