Home > Gigabyte > Motherboard > Gigabyte Gaming 5 Manual

Gigabyte Gaming 5 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Gigabyte Gaming 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 32 Gigabyte manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 &LAN PXE Boot Option ROM Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled)	 This	item	is	configurable	only	when	CSM Support is set to Enabled.
     &Storage Boot Option Control Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller. Do not launch    Disables option ROM. Legacy     Enables legacy option ROM only. (Default) UEFI       Enables UEFI option ROM only.	 This	item	is	configurable	only	when	CSM Support is set to Enabled.
     &Other PCI Device Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other than the LAN, storage device, and graphics controllers. Do not launch    Disables option ROM. Legacy     Enables legacy option ROM only. UEFI       Enables UEFI option ROM only. (Default)	 This	item	is	configurable	only	when	CSM Support is set to Enabled.
     &Administrator Password	 Allows	you	to	configure	 an	administrator	 password.	Press		 on	this	 item,	 type	the	password,	 and	then	press	 .	 You	will	be	requested	 to	confirm	 the	password.	 Type	the	password	 again	and	press	. You must enter the administrator password (or user password) at system \
    startup and when entering BIOS Setup. Differing from the user password, the administrator password allows you to make changes to all BIOS settings.
     &User Password	 Allows	 you	to	configure	 a	user	 password.	 Press		 on	this	 item,	 type	the	password,	 and	then	 press	.	 You	will	be	requested	 to	confirm	 the	password.	 Type	the	password	 again	and	press	 .	You must enter the administrator password (or user password) at system startup and when entering BIOS Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.
     To cancel the password, press  on the password item and when requested for the password, enter the	correct	 one	first.	 When	 prompted	 for	a	new	 password,	 press		 without	entering	 any	password.	Press		again	when	prompted	to	confirm.	 NOTE:	Before	setting	the	User	Password,	be	sure	to	set	the	 Administrator	Password	first.
     &Secure Boot	 Allows	you	to	enable	or	disable	Secure	 Boot	and	configure	related	settings.
    - 31 -  
    						
    							2-5 Peripherals
     &Initial Display Output	 Specifies	the	first	 initiation	 of	the	 monitor	 display	from	the	installed	 PCI	Express	 graphics	 card	or	the	 onboard 	graphics. IGFX	 	 	 Sets	the	onboard	graphics	as	the	first	display. PCIe	1	Slot		 Sets	the	graphics	card	on	the	PCIEX16	slot	as	the	first	display.	(Default) PCIe	2	Slot		 Sets	the	graphics	card	on	the	PCIEX4	slot	as	the	first	display.
     &LED_C Connect Enables or disables the lights of the RGB (RGBW) LED strip connected t\
    o the LED_C header on the motherboard.  (Default: Enabled)
     &RGB Fusion
     Allows you to set the LED lighting mode for the motherboard.
     Off      Disables this function.
     Pulse Mode All LEDs simultaneously fade in and fade out.
     Color Cycle  All LEDs simultaneously cycle through a full spectrum of colors.
     Static Mode All LEDs emit a single color. (Default)
     Flash	Mode	 All	LEDs	simultaneously	flash	on	and	off.
     &Intel Platform Trust Technology (PTT) Enables or disables Intel® PTT Technology. (Default: Disabled)
     &USB 3.0 DAC-UP 2 (Output Voltage of USB 3.1 Gen 1 Ports on the Back Panel) Allows you to increase the output voltage of the USB 3.1 Gen 1 ports on the back panel (the ones below the PS/2 keyboard/mouse port) to strengthen the stability of your USB d\
    evice(s). Normal          Keeps the original output voltage. (Default) Disable  USB  bus  power     Disables the power of the USB connectors. High-end audio players may connect their own external USB power source. Voltage Compensation +0.1V Adds 0.1V to the original output voltage. Voltage Compensation +0.2V Adds 0.2V to the original output voltage. Voltage Compensation +0.3V Adds 0.3V to the original output voltage.
    - 32 -  
    						
    							 `OffBoard	SATA	Controller	Configuration	 Displays information on your M.2 PCIe SSD if installed.
     `Trusted Computing Enables or disables Trusted Platform Module (TPM).
     `Intel(R) Bios Guard Technology Enables or disables the Intel® BIOS Guard feature, which protects the BIOS from malicious attacks.
     `Network	Stack	Configuration
     &Network Stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disabled)
     &Ipv4 PXE Support	 Enables	or	disables	IPv4	PXE	Support.	 This	item	is	configurable	only	when	Network Stack is enabled.
     &Ipv4 HTTP Support	 Enables	or	disables	 HTTP	boot	 support	 for	IPv4.	 This	item	is	configurable	 only	when	Network Stack is enabled.
     &Ipv6 PXE Support	 Enables	or	disables	IPv6	PXE	Support.	 This	item	is	configurable	only	when	Network Stack is enabled.
     &Ipv6 HTTP Support	 Enables	or	disables	 HTTP	boot	 support	 for	IPv6.	 This	item	is	configurable	 only	when	Network Stack is enabled.
     &PXE boot wait time	 Allows	 you	to	configure	 how	long	 to	wait	 before	 you	can	press	 	 to	abort	 the	PXE	 boot.	This	 item	is	configurable	only	when	Network Stack is enabled. (Default: 0)
     &Media detect count	 Allows	 you	to	set	 the	 number	 of	times	 to	check	 the	presence	 of	media.	 This	item	is	configurable	 only	when	Network Stack is enabled. (Default: 1)
     `NVMe	Configuration Displays information on your M.2 NVME PCIe SSD if installed.
     `USB	Configuration
     &Legacy USB Support  Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
     &XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Disabled)
     &USB Mass Storage Driver Support Enables or disables support for USB storage devices. (Default: Enabled)
    - 33 -  
    						
    							 &Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Enabled)
     &Mass Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed.
     `SATA 	And	RST	Configuration
     &SATA Controller(s)   Enables or disables the integrated SATA controllers. (Default: Enabled)
     &SATA Mode Selection 	 Specifies	the	operating	mode	of	the	integrated	SATA 	controllers. Intel RST With Intel Optane System Acceleration   Enables Intel® Optane™ Technology support for the SATA controllers. AHCI	 	 		
    Configures	the	SATA 	controllers	 to	AHCI	 mode.	 Advanced	 Host	Controller	 Interface	(AHCI)	is	an	 interface	 specification	 that	allows	 the	storage	 driver	to	enable	 advanced	Serial ATA features such as Native Command Queuing and hot plug. (Default)
     &Aggressive LPM Support Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset SATA controllers. (Default: Enabled)
     &Port 0/1/2/3/4/5 Enables or disables each SATA port. (Default: Enabled)
     &Hot plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
     &Configured	as	eSATA Enables or disables support for external SATA devices.
    - 34 -  
    						
    							 &VT-d (Note)
     Enables or disables Intel® Virtualization Technology for Directed I/O. (Default: Enabled)
     &Internal Graphics Enables or disables the onboard graphics function. (Default: Auto)
     &DVMT Pre-Allocated Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 32M)
     &DVMT Total Gfx Mem Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX. (Default: 256M)
     &Audio Controller Enables or disables the onboard audio function. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using th\
    e onboard audio, set this item to Disabled.
     &PCH LAN Controller Enables or disables the onboard LAN function. (Default: Enabled)  If you wish to install a 3rd party add-in network card instead of using \
    the onboard LAN, set this item to Disabled.
     &Wake on LAN Enable Enables or disables the wake on LAN function. (Default: Enabled)
     &High Precision Timer Enables or disables High Precision Event Timer (HPET) in the operating system. (Default: Enabled)
     &IOAPIC 24-119 Entries Enables or disables this function. (Default: Enabled)
    2-6 Chipset
    (Note)  This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit Intel's website.
    - 35 -  
    						
    							 &Platform Power Management Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)
     &PEG ASPM	 Allows	 you	to	configure	 the	ASPM	 mode	for	the	 device	 connected	 to	the	 CPU	 PEG	 bus.	This	 item	is	configurable	only	when	Platform Power Management is set to Enabled. (Default: Enabled)
     &PCH ASPM	 Allows	 you	to	configure	 the	ASPM	 mode	for	the	 device	 connected	 to	Chipset's	 PCI	Express	 bus.	This	 item	is	configurable	only	when	Platform Power Management is set to Enabled. (Default: Enabled)
     &DMI ASPM 	 Allows	 you	to	configure	 the	ASPM	 mode	for	both	 CPU	 side	and	Chipset	 side	of	the	 DMI	 link.	This	 item	is	configurable	only	when	Platform Power Management is set to Enabled. (Default: Enabled)
     &AC BACK Determines the state of the system after the return of power from an AC power loss. Always Off      The system stays off upon the return of the AC power. (Default) Always On   The system is turned on upon the return of the AC power. Memory   The system returns to its last known awake state upon the return of the \
    AC power.
     &Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up event. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead. Disabled    Disables this function. (Default) Any Key   Press any key to turn on the system. Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system. Password   Set a password with 1~5 characters to turn on the system.
    2-7 Power
    - 36 -  
    						
    							 &Power On Password Set the password when Power On By Keyboard is set to Password. Press  on this item and set a password with up to 5 characters and then press  to accept. To turn on the system, enter the password and press . Note: To cancel the password, press  on this item. When prompted for the\
     password, press  again without entering the password to clear the password settings.
     &Power On By Mouse Allows the system to be turned on by a PS/2 mouse wake-up event. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead. Disabled    Disables this function. (Default) Move     Move the mouse to turn on the system. Double Click Double click on left button on the mouse to turn on the system.
     &ErP Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled) Note: When this item is set to Enabled, the following functions will become unavailable: Resume by Alarm, PME event wake up, power on by mouse, power on by keyboard, and wake on \
    LAN.
     &Soft-Off by PWR-BTTN	 Configures	the	way	to	turn	off	the	computer	in	MS-DOS	mode	using	the	power	button. Instant-Off    Press the power button and then the system will be turned off instantly. (Default) Delay  4  Sec.   Press and hold the power button for 4 seconds to turn off the system. If the power button is pressed for less than 4 seconds, the system will enter suspend mode.
     &Power Loading   Enables or disables dummy load. When the power supply is at low load, a \
    self-protection will activate causing it to shutdown or fail. If this occurs, please set to Enabled. Auto	lets	 the	BIOS	 automatically	 configure	this	setting. (Default: Auto)
     &Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled)  If enabled, set the date and time as following: Wake	up	day:	 Turn	on	the	system	at	a	specific	time	on	each	day	or	on	a	specific	day	in	a	month. Wake up hour/minute/second: Set the time at which the system will be powe\
    red on automatically. Note: When using this function, avoid inadequate shutdown from the operating system or removal of the AC power, or the settings may not be effective.
     &RC6(Render Standby) Allows you to determine whether to let the onboard graphics enter standb\
    y mode to decrease power consumption. (Default: Enabled)
    - 37 -  
    						
    							2-8 Save & Exit
     &Save & Exit Setup Press  on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press  to return to the BIOS Setup Main Menu.
     &Exit Without Saving Press  on this item and select Yes. This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS. Select No or press  to return to the BIOS Setup Main Menu.
     &Load Optimized Defaults Press  on this item and select Yes to load the optimal BIOS default settings. The BIOS defaults settings help the system to operate in optimum state.  Always load the Optimized defaults after updating the BIOS or after clearing the CMOS values.
     &Boot Override Allows you to select a device to boot immediately. Press  on the device you select and select Yes to	confirm.	 Your	system	will	restart	automatically	and	boot	from	that	device.
     &Save	Profiles	 This	function	allows	you	to	save	 the	current	 BIOS	settings	 to	a	profile.	 You	can	create	 up	to	8	profiles	 and	save	as	Setup	 Profile	 1~	Setup	 Profile	 8.	Press	 	 to	complete.	 Or	you	 can	select	Select File in HDD/FDD/USB	to	save	the	profile	to	your	storage	device.
     &Load	Profiles  If your system becomes unstable and you have loaded the BIOS default set\
    tings, you can use this function to	load	 the	BIOS	 settings	 from	a	profile	 created	 before,	without	 the	hassles	 of	reconfiguring	 the	BIOS	settings.	 First	select	 the	profile	 you	wish	 to	load	 and	then	 press	 	 to	complete.	 You	can	select	Select File in HDD/FDD/USB	to	 input	 the	profile	 previously	 created	from	your	storage	 device	or	load	 the	profile	automatically created by the BIOS, such as reverting the BIOS settings to the last settings that worked 
    properly (last known good record).
    - 38 -  
    						
    							 •Before	installing	 the	drivers,	 first	install	 the	operating	 system.	(The	following	 instructions	 use	Windows 10 as the example operating system.) •After installing the operating system, insert the motherboard driver disk into your optical drive. Click on the message "Tap to choose what happens with this disc" on the top-right corner of the screen and select "Run Run.exe." (Or go to My Computer, double-click the optical drive and execute the Run.exe program.)
    Drivers Installation
    Please visit GIGABYTE's website for more software information.
    Please	visit	GIGABYTE's	website	for	details	on	configuring	the	audio	software.
    Chapter 3  Appendix
    "Xpress Install" will automatically scan your system and then list all of the drivers that are recommended t\
    o install. You can click the Xpress Install button and "Xpress Install" will install all of the selected drivers. O\
    r click the arrow  icon to individually install the drivers you need.
    - 39 -  
    						
    							Regulatory Statements
    Regulatory NoticesThis document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose.Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at the time of printing. GIGABYTE cannot, however, assume any responsibility for errors or omissions in this text. Also note that the information in this document is subject to change without notice and should not be construed as a commitment by GIGABYTE.
    Our Commitment to Preserving the EnvironmentIn	addition	 to	high-efficiency	 performance,	all	GIGABYTE	 motherboards	 fulfill	European	 Union	regulations 	for RoHS (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic Equipment) environmental directives, as well as most major worldwide safety requirements. To prevent releases of harmful substances into the environment and to maximize the use of our natural resources, GIGABYTE provides the following information on how you can responsibly recycle or reuse most of the materials in your "end of life" product. 
    Restriction of Hazardous Substances (RoHS) Directive StatementGIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE and PBB). The parts and components have been carefully selected to meet RoHS requi\
    rement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic c\
    hemicals.
    Waste Electrical & Electronic Equipment (WEEE) Directive StatementGIGABYTE	 will	fulfill	 the	national	 laws	as	interpreted	 from	the	2002/96/EC	 WEEE	(Waste	 Electrical	 and	Electronic 	Equipment)	 directive.	The	WEEE	 Directive	 specifies	 the	treatment,	 collection,	recycling	and	disposal	 of	electric	and electronic devices and their components. Under the Directive, used equipment must be marked, collected separately, and disposed of properly.
    WEEE Symbol StatementThe symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve na\
    tural resources and ensure that it is recycled in a manner that protects human\
     health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local	 government	 office,	your	household	 waste	disposal	 service	or	where	 you	purchased	 the	product	 for	details	of environmentally safe recycling. ŠWhen your electrical or electronic equipment is no longer useful to you, "take it back" to your \
    local or regional waste collection administration for recycling. ŠIf you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort.
    Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of\
     or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment,	 minimize	the	use	 of	landfills	 for	the	 disposal	 of	"end	 of	life"	 products,	 and	generally	 improve	our	quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly.
    - 40 -  
    						
    All Gigabyte manuals Comments (0)

    Related Manuals for Gigabyte Gaming 5 Manual