GIGABYTE Ga8ipe1000 User Manual

BIOS Setup - 31 -
English„ „„ „
„Load Optimized Defaults
Optimized Defaults indicates the value of the system parameters which the system would be in best
performance configuration.
„ „„ „
„Set Supervisor Password
Change, set, or disable password. It allows you to limit access to the system and Setup, or just to Setup.
„ „„ „
„Set User Password
Change, set, or disable password. It allows you to limit access to the system.
„ „„ „
„Save & Exit Setup
Save CMOS value settings to CMOS and exit setup.
„ „„ „...

GA-8IPE1000 Series Motherboard - 32 -
English
2-1 Standard CMOS Features
Date
The date format is , , , .
Week The week, from Sun to Sat, determined by the BIOS and is display only
Month The month, Jan. Through Dec.
Day The day, from 1 to 31 (or the maximum allowed in the month)
Year The year, from 1999 through 2098
Time
The times format in   . The time is calculated base on the 24-hour military-
time clock. For example, 1 p.m. is 13:00:00.
IDE Channel 0 Master, Slave / IDE Channel 1 Master, Slave
IDE HDD...

BIOS Setup - 33 -
EnglishDrive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the computer.
None No floppy drive installed
360K, 5.25 5.25 inch PC-type standard drive; 360K byte capacity.
1.2M, 5.25 5.25 inch AT-type high-density drive; 1.2M byte capacity
(3.5 inch when 3 Mode is Enabled).
720K, 3.5 3.5 inch double-sided drive; 720K byte capacity
1.44M, 3.5 3.5 inch double-sided drive; 1.44M byte capacity.
2.88M, 3.5 3.5 inch double-sided drive;...

GA-8IPE1000 Series Motherboard - 34 -
English
2-2 Advanced BIOS Features
Hard Disk Boot Priority
Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use <
> or  to select a device, then press to move it up, or  to move it down the list. Press
 to exit this menu.
First / Second / Third Boot Device
Floppy Select your boot device priority by Floppy.
LS120 Select your boot device priority by LS120.
Hard Disk Select your boot device priority by Hard Disk.
CDROM Select your boot device priority...

BIOS Setup - 35 -
English2-3 Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
On-Chip Primary PCI IDE [Enabled]
On-Chip Secondary PCI IDE [Enabled]
On-Chip SATA[Auto]
x SATA Port0 configure as SATA Port0
SATA Port1 configure as SATA Port1
USB Controller[Enabled]
USB 2.0 Controller[Enabled]
USB Keyboard Support[Disabled]
USB Mouse Support[Disabled]
AC97 Audio[Auto]
Onboard H/W LAN 12[Enabled]
Onboard LAN Boot ROM 12[Disabled]
Onboard Serial Port 1...

GA-8IPE1000 Series Motherboard - 36 -
English
On-Chip SATA
Disabled Disable onboard Seria ATA function.
Auto When there is no device to be plugged in IDE1 or IDE2, SATA controller will
remap to IDE controller. (Default value)
Manual Set SATA mode manually from SATA Port0 configure as item.
SATA Port0 configure as
IDE Pri. Master Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
IDE Primary Master.
IDE Pri. Slave Set SATA controller to compatible mode. This mode will remap SATA...

BIOS Setup - 37 -
EnglishOnboard LAN Boot ROM 
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled Enable this function.
Disabled Disable this function. (Default value)
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 1...

GA-8IPE1000 Series Motherboard - 38 -
English
Onboard Parallel port
Disabled Disable onboard LPT port.
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default value)
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
Parallel Port Mode
SPP Using Parallel port as Standard Parallel Port.
EPP1.9+SPP Using Parallel port as Enhanced Parallel Port 1.9 and SPP mode.
ECP Using Parallel port as Extended Capabilities Port.
EPP1.9+ECP Using...

BIOS Setup - 39 -
English2-4 Power Management Setup
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR) Set ACPI suspend type to S3/STR(Suspend To RAM).
Power LED in S1 state
Blinking In standby mode(S1), power LED will blink. (Default value)
Dual/Off In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Off by Power button
Instant-off Press power button then Power off...

GA-8IPE1000 Series Motherboard - 40 -
English
Resume by Alarm
You can set Resume by Alarm item to enabled and key in Date/Time to power on system.
Disabled Disable this function. (Default value)
Enabled Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm :   Everyday, 1~31
Time (hh: mm: ss) Alarm :  (0~23) : (0~59) : (0~59)
POWER ON Function
Disabled Disable this function. (Default value)
Any KEY Press any key to power on the system.
Mouse Double...