Gigabyte Ga-78lmt-usb3 Manual

GA-78LMT
Users Manual
Rev  

MotherboardGA-78LMT-USB3
Apr. 12, 2013
Apr. 12, 2013
MotherboardGA-78LMT-USB3
Copyright
© 2013 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their \
respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the pro\
perty of GIGABYTE.
Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice.
No part of this manual may be reproduced, copied, translated,...

- 3 -
Table of Contents
GA-78LMT-USB3 Motherboard Layout ........................................................................\
...4
GA-78LMT-USB3 Motherboard Block Diagram ...............................................................5
Chapter 1 Hardware Installation ........................................................................\
.............6
1-1 Installation Precautions ....................................................................................6
1-2 Product Specifications...

- 4 -
GA-78LMT-USB3 Motherboard Layout
The box contents above are for reference only and the actual items shall\
 depend on the product package you obtain. The box contents are subject to change without notice.
Box Contents
 5GA-78LMT-USB3 motherboard
 5Motherboard driver disk 5Two SATA cables
 5User's Manual 5One IDE cable
 5I/O Shield
KB_MS_USBCPU_FAN
AM3+
AT X
IDE
GA-78LMT-USB3
F_AUDIO
AUDIO
B_BIOS
DDR3_4DDR3_2DDR3_3DDR3_1
B AT
ATX_12V
S ATA 2
S ATA 2
R_USB30
CODEC
M_BIOS
DVIVGA
HDMI
USB_LAN...

- 5 -
GA-78LMT-USB3 Motherboard Block Diagram
For detailed product information/limitation(s), refer to "1-2 Product Specifications."
iTE® Super I/O
PS/2 KB/Mouse
COM
LPTLPC Bus
Line Out (Front Speaker Out)
MIC (Center/Subwoofer 
Speaker Out)
Line In (Rear Speaker Out)
CODEC
Hyper Transport 3.0
orAMD 760G
CPU CLK+/- (200 MHz)
Dual Channel Memory
PCI Bus
AM3+/AM3 CPU
1 PCI
PCI CLK (33 MHz)
DDR3 1333+ (O.C.)/1066 MHz
Dual BIOS
8 USB 2.0/1.16 SATA 3Gb/s
ATA-133/100/66/33 IDE ChannelAMD SB710
PCI...

- 6 -
Chapter 1 Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can become 
damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's 
manual and follow these procedures:
 •Prior to installation, make sure the chassis is suitable for the motherb\
oard.
 •Prior to installation, do not remove or break motherboard S/N (Serial N\
umber) sticker or 
warranty sticker provided...

- 7 -
1-2	 Product	Specifications
CPU ŠAM3+ Socket:- AMD AM3+ processor- AMD AM3 Phenom™ II processor/ AMD Athlon™ II processor(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport Bus Š4400 MT/s
Chipset ŠNorth Bridge: AMD 760G ŠSouth Bridge: AMD SB710
Memory Š4 x DDR3 DIMM sockets supporting up to 32 GB of system memory*    Due to a Windows 32-bit operating system limitation, when more than 4 GB\
 of physical memory is installed, the actual memory size...

- 8 -
Internal 
Connectors
 Š1 x front panel header Š1 x front panel audio header Š1 x S/PDIF Out header Š1 x USB 3.0/2.0 header Š2 x USB 2.0/1.1 headers Š1 x serial port header Š1 x parallel port header Š1 x Clear CMOS jumper
Back Panel Connectors Š1 x PS/2 keyboard/mouse port Š1 x D-Sub port Š1 x DVI-D port Š1 x HDMI port Š2 x USB 3.0/2.0 ports Š4 x USB 2.0/1.1 ports Š1 x RJ-45 port Š3 x audio jacks (Line In/Line...

- 9 -
1-3 Installing the CPU
Read the following guidelines before you begin to install the CPU: •Make sure that the motherboard supports the CPU.(Go to GIGABYTE's website for the latest CPU support list.) •Always turn off the computer and unplug the power cord from the power outlet before in\
stalling the CPU to prevent hardware damage. •Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. •Apply an even and thin layer of thermal grease on the surface of the CPU\
. •Do...

- 10 -
1-5 Installing an Expansion Card
Read the following guidelines before you begin to install an expansion c\
ard: •Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. •Always turn off the computer and unplug the power cord from the power outlet before installing an expansion card to prevent hardware damage.
1-6 Back Panel Connectors
USB 2.0/1.1 Port
The  USB  port  supports  the  USB  2.0/1.1  specification.  Use  this  port  for  USB...