Gateway m520 User Manual

15www.gateway.com
Bottom
Component Description
Battery lock Slide to unlock the battery. For more information, see “Changing 
batteries” on page 59.
Battery latch Slide to release the battery. For more information, see “Changing 
batteries” on page 59.
Hard drive bay The hard drive is located in this bay. For more information, see 
“Replacing the hard drive kit” on page 70.
Memory bay Install a memory module into this bay. For more information, see 
“Adding or replacing memory” on page 68.
System label...

16www.gateway.com
Keyboard area
Component Icon Description
Multi-function 
buttonsPress these buttons to open programs assigned to them or 
control the volume. For more information, see “Multi-function 
buttons” on page 34.
Keyboard Provides all the features of a full-sized, 86-key keyboard. For 
more information, see “Using the keyboard” on page 30.
Status 
indicatorsInform you when a drive is in use or when a button has been 
pressed that affects how the keyboard is used. For more 
information, see...

17www.gateway.com
Identifying your model
Gateway model and serial number
The label on the bottom of your notebook contains information that 
identifies your notebook model and its features. Gateway Customer Care 
will need this information if you call for assistance.
Microsoft Certificate of Authenticity
The Microsoft Certificate of Authenticity label found on the bottom of 
your notebook includes the product key code for your operating system.
ImportantThe labels shown in this section are for...

18www.gateway.com
Finding your specifications
For more information about your notebook, such as memory size, 
memory type, and hard drive size, visit Gateway’s eSupport page at 
support.gateway.com
. The eSupport page also has links to additional 
Gateway documentation and detailed specifications. For more 
information, see “Using eSupport” on page 4. 

19www.gateway.com
Accessories
To order accessories, visit the Accessory Store at accessories.gateway.com.
Batteries and automobile/airplane power adapters
If you run your notebook on battery power for extended periods, you 
may want to buy an additional battery so you can swap batteries when 
necessary. See “Changing batteries” on page 59 for more information 
about using an additional battery.
With an automobile/airplane power adapter, you can save battery power 
by plugging your notebook into an...

20www.gateway.com 

Chapter 3
21



■Installing the battery
■Connecting the AC adapter
■Turning your notebook on and off
■Using the status indicators, keyboard, 
and the EZ Pad touchpad
■Adjusting the volume 

22www.gateway.com
Installing the battery
To install the battery:
1Close the LCD panel.
2Turn your notebook over so the bottom is facing up.
3Hold the battery label-side down and slide it into the open battery 
compartment until the battery clicks into place.
4Slide the battery lock to the locked position. 

23www.gateway.com
Connecting the AC adapter
You can run your notebook using an AC adapter or your notebook’s 
battery. The battery was shipped to you partially charged. You should use 
the AC adapter right away to fully charge the battery. Allow three hours 
for the battery to fully charge.
To connect the AC adapter:
1Connect the power cord to the AC adapter.
ImportantIf the battery is not fully charged before you use 
your notebook on battery power for the first time, 
the battery life may be much...

24www.gateway.com
2Connect the AC adapter to your notebook’s power connector.
3Plug the power cord into a wall outlet.
The battery charge indicator turns on (see “Front” on page 10 for 
the location of the battery charge indicator). 
If the battery charge indicator does not turn on, complete the 
following steps until it turns on:
aUnplug the adapter from your notebook, then plug it back in.
bPress FN+F1 to toggle the status lights on and off.
4When you finish using your notebook for the first time, turn...