Gateway m405 User Manual

							14
221
Restoring
Software
Read this chapter to learn how to:
■Reinstall device drivers
■Update device drivers
■Reinstall programs
■Reinstall Windows
If you are not comfortable with the procedures covered in 
this chapter, seek help from a more experienced computer 
user or a computer service technician. 
						

							222
Chapter 14: Restoring Software
www.gateway.com
Using the Restoration CDs
Use the Gateway Restoration CDs to reinstall device drivers, your operating 
system, and other programs that were preinstalled at the factory.
Reinstalling device drivers
Device drivers are programs that control devices such as the notebook display, 
CD or DVD drives, and modems. Drivers translate information between 
computer devices and programs.
Drivers for your original notebook hardware are installed at Gateway. If you 
install a new device, you need to install the drivers provided by the device 
manufacturer.
You should reinstall device drivers:
■If directed to do so while troubleshooting
■If you see a message indicating that there is a problem with a device driver
ImportantBefore you try to fix a problem by reinstalling software from 
your Gateway Restoration CDs, make sure that you have 
tried these steps first:
■Use the diagnostics and troubleshooting tools found in 
Help and Support. For more information about 
diagnostics and troubleshooting tools in Windows XP, 
click Start, then click Help and Support.
Type the keyword troubleshooting in the Search box 
, then click the arrow.
■Run System Restore. For more information about 
System Restore in Windows XP, click Start, then click 
Help and Support.
Type the keyword System Restore in the Search box 
, then click the arrow.
■See the Troubleshooting chapter of this guide.
If these steps do not resolve the problem, use the Gateway 
Restoration CDs to reinstall device drivers or programs.
If reinstalling device drivers or programs does not resolve 
the problem, reinstall Windows. 
						

							223
Reinstalling device drivers
www.gateway.com
If you need to reinstall device drivers because you are directed to do so while 
troubleshooting or if a message tells you that there is a problem with a device 
driver, reinstall the device drivers by following the instructions below.
If you just reinstalled Windows XP or Windows 2000, the device drivers were 
automatically reinstalled.
To reinstall device drivers:
1Insert the red Drivers and Applications CD into the CD or DVD drive. If the 
program starts automatically, go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
2Click Start, then click Run. The Run dialog box opens.
3In the Open text box, type d:\runmenu.exe (where d is the drive letter of 
your CD or DVD drive).
4Click OK.
5If this is the first time you have inserted the red Drivers and Applications 
CD, accept the End User License Agreement (EULA) by clicking 
Yes, I accept 
it
, then clicking Continue. The Gateway Driver and Application Recovery 
program starts and the 
Drivers and Application Recovery tab appears.
6Select a single device driver to reinstall.
- OR -
Click 
Automatic Installation, then select multiple device drivers to reinstall. 
(Grayed out drivers are not available for Automatic Installation. To select 
these drivers, click 
Manual Installation.)
7Click Install.
8Follow any additional on-screen instructions. Depending on the device 
driver you are reinstalling, you may only need to restart your notebook 
to complete the installation. However, if a setup wizard opens when you 
restart your notebook, follow the on-screen instructions. 
						

							224
Chapter 14: Restoring Software
www.gateway.com
Updating device drivers
The Restoration CDs contain a device driver update utility that works over the 
Internet. If you do not have an Internet service provider, the update utility 
works by direct-dialing the device driver update service.
To update device drivers:
1Insert the red Drivers and Applications CD into the CD or DVD drive. If the 
program starts automatically, go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
2Click Start, then click Run. The Run dialog box opens.
3In the Open text box, type d:\runmenu.exe (where d is the drive letter of 
the CD or DVD drive).
4Click OK.
Help and 
SupportFor more information about reinstalling device drivers in 
Windows XP, click Start, then click Help and Support.
Type the keyword drivers in the Search box 
, then click the arrow.
ImportantIf your system came equipped with a wireless device, only 
use the drivers approved for the country the device will be 
used in. See the red Drivers and ApplicationsCD or the 
Gateway Technical Support Web site 
(support.gateway.com
).
If your system came equipped with an internal embedded 
wireless device, see “Safety, Regulatory, and Legal 
Information” on page 283 for general wireless regulatory 
and safety guidelines.To find out if your system has an 
internal wireless device, check the label (see “Identifying 
your model” on page 11). 
						

							225
Reinstalling programs
www.gateway.com
5If this is the first time you have inserted the red Drivers and Applications 
CD, accept the End User License Agreement (EULA) by clicking 
Yes, I accept 
it
, then clicking Continue. The Gateway Driver and Application Recovery 
program starts and the 
Drivers and Application Recovery tab appears.
6Click the Web Updates tab.
7Click Check Now. The Connect window opens.
8Install available updated device drivers by following the on-screen 
instructions. Depending on the device driver you are updating, you may 
only need to restart your notebook to complete the installation. However, 
if a setup wizard opens when you restart your notebook, follow the 
on-screen instructions.
Reinstalling programs
If you have problems running a program or if you have reinstalled your 
operating system, you can reinstall programs from the red Drivers and 
Applications CD and other program CDs. If you are reinstalling programs from 
other program CDs, follow the installation instructions on each CD. If you want 
to reinstall a program, uninstall the old version first.
To reinstall programs from the Drivers and Applications CD:
1If you just reinstalled Windows, go to Step 4. Otherwise, go to the next 
step.
2In Windows XP, click Start, Control Panel, then click 
Add or Remove Programs.
- OR -
In Windows 2000, click 
Start, Settings, Control Panel, then double-click the 
Add or Remove Programs icon.
Help and 
SupportFor more information about updating device drivers in 
Windows XP, click Start, then click Help and Support.
Type the keyword updating drivers in the Search box 
, then click the arrow. 
						

							226
Chapter 14: Restoring Software
www.gateway.com
3In the Currently Installed Programs list, click the program you want to 
uninstall, then click 
Change/Remove and follow the on-screen instructions.
4Insert the red Drivers and Applications CD into the CD or DVD drive. If the 
program starts automatically, go to Step 8.
- OR -
If the program does not start automatically, go to Step 5.
5Click Start, then click Run. The Run dialog box opens.
6In the Open text box, type d:\runmenu.exe (where d is the drive letter of 
your CD or DVD drive).
7Click OK.
8If this is the first time you have inserted the red Drivers and Applications 
CD, accept the End User License Agreement (EULA) by clicking 
Yes, I accept 
it
, then clicking Continue. The Gateway Driver and Application Recovery 
program starts and the 
Drivers and Application Recovery tab appears.
9Select a single program to reinstall.
- OR -
Click 
Automatic Installation, then select multiple programs to reinstall. 
(Grayed out programs are not available for Automatic Installation. To select 
these programs, click 
Manual Installation.)
10Click Install.
11Follow any additional on-screen instructions. Depending on the programs 
you are reinstalling, you may only need to restart your notebook to 
complete the installation. However, if a setup wizard opens when you 
restart your notebook, follow the on-screen instructions.
Help and 
SupportFor more information about reinstalling programs in 
Windows XP, click Start, then click Help and Support.
Type the keyword installing programs in the Search box 
, then click the arrow. 
						

							227
Reinstalling Windows
www.gateway.com
To reinstall other programs from a CD:
1If you just reinstalled Windows, go to Step 4. Otherwise, go to the next 
step.
2In Windows XP, click Start, Control Panel, then click 
Add or Remove Programs.
- OR -
In Windows 2000, click 
Start, Settings, Control Panel, then double-click the 
Add or Remove Programs icon.
3In the Currently Installed Programs list, click the program you want to 
uninstall, then click 
Change/Remove and follow the on-screen instructions.
4Insert the program CD into the CD or DVD drive.
5Complete the program reinstallation by following the instructions 
included with the program CD.
Reinstalling Windows
If your notebook is not working correctly, try the following options to correct 
the problem:
■Troubleshooting. For more information, see “Troubleshooting” on 
page 253.
■Running System Restore.
■Reinstalling device drivers. For more information, see “Reinstalling device 
drivers” on page 222.
If the options above do not correct the problem, you can use the Restoration 
CDs to reinstall Windows and other software.
The Restoration CDs step you through reinstalling Windows XP or 
Windows 2000. If you are reinstalling Windows XP or Windows 2000, the 
Restoration CDs automatically reinstall the hardware device drivers and some 
programs as well. You can install any remaining programs by using the program 
CDs that came with your notebook. To reinstall your programs, follow the 
instructions in “Reinstalling programs” on page 225. 
						

							228
Chapter 14: Restoring Software
www.gateway.com
To reinstall Windows XP or Windows 2000, and the device drivers:
1Insert the red Drivers and Applications CD into the CD or DVD drive.
2Restart your notebook.
3Select 2. Boot from CD-ROM.
4Select a language option.
5Select 1. Delete all files (Automated Fdisk/Format).
6Select 1. Continue deleting all files and restart.
7When prompted, press any key to continue.
8Select 2. Boot from CD-ROM.
9Select a language option.
10Select 2. Automated installation of Windows (XP or 2000).
11When prompted, remove the red Drivers and Applications CD and insert 
the blue Operating System CD into the CD or DVD drive, then press any 
key to continue.
12When prompted, accept the License Agreement by pressing Y.
13Wait while the setup program copies files to your hard drive. When your 
notebook restarts, do NOT press any key to boot from CD.
14When prompted, insert the red Drivers and Applications CD, then click 
Continue. The Gateway Application Loader automatically installs your 
drivers and programs. Your notebook restarts several times during this 
process. Do not press any keys or buttons during this process unless 
prompted to do so.
ImportantIf you are prompted for your Windows product key when 
you reinstall Windows, you can find the key on the 
Microsoft Certificate of Authenticity label located on the 
bottom of your notebook case. For more information, see 
“Microsoft Certificate of Authenticity” on page 12.
CautionBack up your personal files before you use this option.
All files on your notebook will be deleted! 
						

							229
Reinstalling Windows
www.gateway.com
15When the Gateway Application Loader has finished, go to the Windows 
desktop by clicking 
OK.
16Install additional programs by following the instructions in “Reinstalling 
programs” on page 225.
17Install other software, such as Microsoft Works Suite and gaming software, 
by following the instructions in “To reinstall other programs from a CD:” 
on page 227. 
						

							230
Chapter 14: Restoring Software
www.gateway.com