Gateway m305 User Manual
Have a look at the manual Gateway m305 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 54 Gateway manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
191 Using a wired Ethernet network www.gateway.com Using a wired Ethernet network A wired Ethernet network consists of two or more computers connected together through an Ethernet cable. This connection type is commonly used in offices around the world and can be used to build computer networks in the home. Ethernet, Fast Ethernet, or Gigabit Ethernet Ethernet is available at three different speeds. Standard Ethernet runs at 10 Mbps, Fast Ethernet runs at 100 Mbps, and Gigabit Ethernet runs at 1000 Mbps. Most home networks are built using Standard or Fast Ethernet components. Business networks are typically built using Fast or Gigabit Ethernet components. To create a wired Ethernet network, you or your electrician must: ■Install special Ethernet cables in your home or office ■Install an Ethernet card in each of your desktop computers (if your computers do not already have built-in Ethernet jacks) ■Install an Ethernet PC Card in each of your notebooks (if your notebooks do not already have built-in Ethernet jacks) ■Install an Ethernet router, switch, or hub ImportantCheck local code requirements before installing Ethernet cable or other wiring in your home or office. Your municipality may require you to obtain a permit and hire a licensed installer. Tips & TricksIf you are connecting just two computers (known as a peer-to-peer wired Ethernet network), you can eliminate the router, switch, or hub and use a special crossover cable.
192 Chapter 11: Networking Your Notebook www.gateway.com Example wired Ethernet network The following is an example of a wired Ethernet network. The network is made up of a router, a cable or DSL modem, your computers, and cables connecting each of these components. The router is the central control point for the network. Attached to the router are all of your computers or Ethernet-ready devices. Also connected to the router is a cable or DSL modem that provides access to the Internet. Tips & TricksTo add the ability to access a wireless Ethernet network to your wired Ethernet network, connect an access point to the router, switch, or hub. For more information about accessing a wireless Ethernet, see “Using a wireless Ethernet network” on page 194. Cable/DSL modem Router, switch, or hub
193 Using a wired Ethernet network www.gateway.com Equipment you need for a wired Ethernet network For a wired Ethernet network you need: ■An Ethernet jack on each desktop computer, notebook, and tablet PC. - OR - An Ethernet card (also called network interface cards or NICs) installed in each desktop computer. - OR - An Ethernet PC Card installed in each notebook. ■An Ethernet router. Select a router that gives you the following features: ■A jack for connecting to a cable or DSL modem. ■The ability to assign IP addresses to your networked computers dynamically. This prevents intruders from seeing the computers over the Internet. ■A built-in firewall to protect the computers on your network from intruders trying to access your data over the Internet. ■Built-in switching (with enough ports for all computers and devices on the network) so you will not have to purchase a hub or switch. ■If you did not purchase a router that includes built-in switching or if the router does not have enough ports to attach all your computers, an Ethernet hub or switch with enough ports for all computers and devices in the network. ■Ethernet cable going from each computer to the router, hub, or switch. ImportantFor best results, all Ethernet components should be either standard Ethernet (10 Mbps), Fast Ethernet (100 Mbps or 10/100), or Gigabit Ethernet (1000 Mbps or 10/100/1000). A mixture of components rated at different speeds will result in your network running at the speed of the slowest rated component.
194 Chapter 11: Networking Your Notebook www.gateway.com Using a wireless Ethernet network A wireless Ethernet network is ideal for creating a home or office network or adding mobility to an existing wired Ethernet network. A wireless Ethernet network allows you the freedom to move about your home or office with your notebook or tablet PC. For example, you can take your notebook or tablet PC from your home office to your patio without having an Ethernet jack available. WarningRadio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. IEEE 802.11a, IEEE 802.11b, and IEEE 802.11g communication devices are examples of devices that provide wireless communication. For instructions to turn wireless Ethernet on and off, see “Turning your wireless Ethernet emitter on or off” on page 200. ImportantIf your notebook came equipped with an internal radio frequency wireless device, see “Safety, Regulatory, and Legal Information” on page 281 for general wireless regulatory and safety guidelines. To find out if your notebook has an internal wireless device, check the label (see “Identifying your model” on page 10) or the device manager.
195 Using a wireless Ethernet network www.gateway.com Wireless Ethernet speed and frequency Wireless Ethernet is available at two different speeds and at two different frequencies. The following table compares the various wireless Ethernet network types. The two most common types of wireless Ethernet networks are access point and peer-to-peer. Network Type Speed Frequency Advantages Disadvantages IEEE 802.11a 54 Mbps 5 GHz Less possible interference than IEEE 802.11b and IEEE 802.11g■Shorter range (25 to 75 feet) than IEEE 802.11b and IEEE 802.11g ■Not compatible with IEEE 802.11b or IEEE 802.11g networks IEEE 802.11b 11 Mbps 2.4 GHz ■Large number of access points already exist in airports, college campuses, and businesses ■Compatible with IEEE 802.11g networks ■Longer range (100 to 150 feet) than IEEE 802.11a ■Possible interference from cordless phones and microwaves ■Not compatible with IEEE 802.11a networks IEEE 802.11g 54 Mbps 2.4 GHz ■Compatible with IEEE 802.11b networks ■Longer range (100 to 150 feet) than IEEE 802.11a ■Possible interference from cordless phones and microwaves ■Not compatible with IEEE 802.11a networks ImportantThe speed of a wireless network is related to signal strength. Signal strength is affected by the distance between your wireless network devices, by radio interference, and by interference from natural obstructions such as walls, floors, and doors.
196 Chapter 11: Networking Your Notebook www.gateway.com Example access point wireless Ethernet network By using an access point, you can join a wireless Ethernet network and access a wired Ethernet network. The following example shows how an access point also lets you access the Internet. The following is an example of an access point wireless Ethernet network. The network is made up of an access point, a cable or DSL modem, and your computers. The access point is the central control point for the network. Attached to the access point is the cable or DSL modem that provides access to the Internet. Each of the computers or Ethernet-ready devices communicate with the access point using radio waves. If your computer does not have built-in wireless Ethernet capabilities, you need to add a wireless PCI card (desktop), PC card (notebook), or USB adapter. Tips & TricksIf you want to access a wireless Ethernet network from your wired Ethernet network, connect an access point to the router, switch, or hub. For more information about accessing a wired Ethernet, see “Using a wired Ethernet network” on page 191. Cable/DSL modem Access point USB wireless adapter
197 Using a wireless Ethernet network www.gateway.com Equipment you need for an access point wireless Ethernet network For an access point wireless Ethernet network you need: ■A wireless Ethernet PCI card installed in each desktop computer - OR - A wireless Ethernet USB adapter attached to each desktop or notebook computer - OR - A notebook or tablet PC with wireless Ethernet built-in - OR - A wireless Ethernet PC Card installed in each notebook that does not have wireless Ethernet built-in ■A wireless Ethernet access point to connect your wireless Ethernet network to the Internet or a wired Ethernet network ImportantIEEE 802.11b and IEEE 802.11g use the same radio frequency. IEEE 802.11a uses a different radio frequency than IEEE 802.11b and IEEE 802.11g. All wireless Ethernet components must use the same frequency. A combination of IEEE 802.11a and IEEE 802.11b or IEEE 802.11a and IEEE 802.11g components will not work. Some wireless devices can broadcast and receive signals on both frequencies. A mixture of IEEE 802.11b and IEEE 802.11g components will result in your network running at the speed of the slower IEEE 802.11b components.
198 Chapter 11: Networking Your Notebook www.gateway.com Example peer-to-peer wireless Ethernet network Use a peer-to-peer (also known as ad hoc) wireless Ethernet network if you are setting up or joining a temporary computer-to-computer network. This type of network does not include access into a wired network or the Internet. You can create this type of network to quickly move files from one computer to another.
199 Using a wireless Ethernet network www.gateway.com Equipment you need for a peer-to-peer wireless Ethernet network For a peer-to-peer wireless Ethernet network you need: ■A wireless Ethernet PCI card installed in each desktop computer - OR - A wireless Ethernet USB adapter attached to each desktop or notebook computer - OR - A notebook or tablet PC with wireless Ethernet built-in - OR - A wireless Ethernet PC Card installed in each notebook that does not have wireless Ethernet built-in For more information For more information about purchasing equipment for your home or office Ethernet network, discuss your particular needs with your Gateway store representative. In addition, several books and Internet sites are dedicated to networking (for example: www.homenethelp.com ). See these sources for more information about networking your home or office with wired or wireless Ethernet. Help and SupportFor more information about networking in Windows XP, click Start, then click Help and Support. Type the keyword networking in the Help and Support Search box , then click the arrow.
200 Chapter 11: Networking Your Notebook www.gateway.com Using your notebook on a network Installing and configuring your notebook for Ethernet networking A networking guide called Setting Up Your Windows Network has been included on your hard drive. This guide provides instructions for installing and configuring both wired and wireless Ethernet networking on your notebook. To access this guide, click Start, All Programs, then click Gateway Documentation. Turning your wireless Ethernet emitter on or off To turn the wireless Ethernet emitter on or off in Windows XP: 1Click Start, then click Control Panel. The Control Panel window opens. If your Control Panel is in Category View, click Network and Internet Connections. The Network and Internet Connections window opens. 2Click/Double-click Network Connections. The Network Connections window opens. 3Right-click Wireless Network Connection, then click Enable to turn on wireless Ethernet or click Disable to turn off wireless Ethernet. WarningRadio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. IEEE 802.11a, IEEE 802.11b, and IEEE 802.11g communication devices are examples of devices that provide wireless communication.